Re: [RESEND PATCH v3 1/2] mfd: da9063: Fix revision handling to correctly select reg tables

[Lee Jones <lee.jones@linaro.org>]

On Mon, 13 Jul 2020, Adam Thomson wrote:

> The current implementation performs checking in the i2c_probe()
> function of the variant_code but does this immediately after the
> containing struct has been initialised as all zero. This means the
> check for variant code will always default to using the BB tables
> and will never select AD. The variant code is subsequently set
> by device_init() and later used by the RTC so really it's a little
> fortunate this mismatch works.
> 
> This update adds raw I2C read access functionality to read the chip
> and variant/revision information (common to all revisions) so that
> it can subsequently correctly choose the proper regmap tables for
> real initialisation.
> 
> Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
> ---
> 
> v3:
>  - Replaced magic numbers around I2C paged access code with enums and defines
>  - Small style tidy ups as requested by Lee Jones
> 
> v2:
>  - Use raw I2C read access instead of a temporary regmap to interrogate chip and
>    variant id registers
> 
>  drivers/mfd/da9063-core.c            |  31 ------
>  drivers/mfd/da9063-i2c.c             | 184 +++++++++++++++++++++++++++++++----
>  include/linux/mfd/da9063/registers.h |  15 ++-
>  3 files changed, 177 insertions(+), 53 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog