[PATCH net-next v2 0/6] Add PAL support to smsc95xx

[Andre Edich <andre.edich@microchip.com>]

To allow to probe external PHY drivers, this patch series adds use of
Phy Abstraction Layer to the smsc95xx driver.

Changes in v2:
- Moved 'net' patches from here to the separate patch series;
- Removed redundant call of the phy_start_aneg after phy_start;
- Removed netif_dbg tracing "speed, duplex, lcladv, and rmtadv";
- mdiobus: added dependency from the usbnet device;
- Moved making of the MII address from 'phy_id' and 'idx' into the
  function mii_address;
- Moved direct MDIO accesses under condition 'if (pdata->internal_phy)',
  as they only need for the internal PHY;
- To be sure, that this set of patches is git-bisectable, tested each
  sub-set of patches to be functional for both, internal and external
  PHYs, including suspend/resume test for the 'devices'
  (5.7.8-1-ARCH, Raspberry Pi 3 Model B).

Andre Edich (6):
  smsc95xx: remove redundant function arguments
  smsc95xx: use usbnet->driver_priv
  smsc95xx: add PAL support to use external PHY drivers
  smsc95xx: remove redundant link status checking
  smsc95xx: use PAL framework read/write functions
  smsc95xx: use PHY framework instead of MII library

 drivers/net/usb/smsc95xx.c | 413 +++++++++++++++++--------------------
 1 file changed, 194 insertions(+), 219 deletions(-)

-- 
2.27.0