Re: [PATCH v4 02/15] drm/panel: panel-simple: add default connector_type

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Sam,

Thank you for the patch.

On Sun, Jul 26, 2020 at 10:33:11PM +0200, Sam Ravnborg wrote:
> All panels shall report a connector type.
> panel-simple has a lot of panels with no connector_type,
> and for these fall back to DPI as the default.
> 
> v2:
>   - Rebased on top of validation of panel description
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/panel/panel-simple.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index a8d68102931e..56ab073e4e6e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -500,6 +500,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>  	struct panel_simple *panel;
>  	struct display_timing dt;
>  	struct device_node *ddc;
> +	int connector_type;
>  	u32 bus_flags;
>  	int err;
>  
> @@ -550,10 +551,12 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>  			panel_simple_parse_panel_timing_node(dev, panel, &dt);
>  	}
>  
> +	connector_type = desc->connector_type;
>  	/* Catch common mistakes for panels. */
> -	switch (desc->connector_type) {
> +	switch (connector_type) {
>  	case 0:
>  		dev_warn(dev, "Specify missing connector_type\n");
> +		connector_type = DRM_MODE_CONNECTOR_DPI;
>  		break;
>  	case DRM_MODE_CONNECTOR_LVDS:
>  		WARN_ON(desc->bus_flags &
> @@ -600,11 +603,11 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>  		break;
>  	default:
>  		dev_warn(dev, "Specify a valid connector_type: %d\n", desc->connector_type);
> +		connector_type = DRM_MODE_CONNECTOR_DPI;
>  		break;
>  	}
>  
> -	drm_panel_init(&panel->base, dev, &panel_simple_funcs,
> -		       desc->connector_type);
> +	drm_panel_init(&panel->base, dev, &panel_simple_funcs, connector_type);
>  
>  	err = drm_panel_of_backlight(&panel->base);
>  	if (err)

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel