From: Andrew Lunn <andrew@lunn.ch>
To: Michal Kubecek <mkubecek@suse.cz>
Cc: Jamie Gloudon <jamie.gloudon@gmx.fr>,
Jacob Keller <jacob.e.keller@intel.com>,
netdev@vger.kernel.org
Subject: Re: Broken link partner advertised reporting in ethtool
Date: Mon, 27 Jul 2020 23:01:41 +0200 [thread overview]
Message-ID: <20200727210141.GA1705504@lunn.ch> (raw)
In-Reply-To: <20200727204227.s2gv3hqszmpk7l7r@lion.mk-sys.cz>
> - the exact command you ran (including arguments)
> - expected output (or at least the relevant part)
> - actual output (or at least the relevant part)
> - output with dump of netlink messages, you can get it by enabling
> debugging flags, e.g. "ethtool --debug 0x12 eth0"
Hi Michal
See if this helps.
This is a Marvel Ethernet switch port using an Marvell PHY.
$ dpkg -l ethtool
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==============-============-============-==========================================
ii ethtool 1:5.4-1 amd64 display or change Ethernet device settings
root@rap:~# ethtool green
Settings for green:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 4
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Link detected: yes
And now ethtool from git 4e02c55227c9958184d5941de73d9cf1cd49bf2e.
root@rap:/home/andrew/ethtool# /home/andrew/ethtool/ethtool green
Settings for green:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: No
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: MII
PHYAD: 4
Transceiver: external
Supports Wake-on: d
Wake-on: d
Link detected: yes
So they are definitely missing.
Here are the netlink messages.
sending genetlink packet (32 bytes):
msg length 32 genl-ctrl
CTRL_CMD_GETFAMILY
CTRL_ATTR_FAMILY_NAME = "ethtool"
...
...
sending genetlink packet (36 bytes):
msg length 36 ethool ETHTOOL_MSG_LINKMODES_GET
ETHTOOL_MSG_LINKMODES_GET
ETHTOOL_A_LINKMODES_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
received genetlink packet (572 bytes):
msg length 572 ethool ETHTOOL_MSG_LINKMODES_GET_REPLY
ETHTOOL_MSG_LINKMODES_GET_REPLY
ETHTOOL_A_LINKMODES_HEADER
ETHTOOL_A_HEADER_DEV_INDEX = 8
ETHTOOL_A_HEADER_DEV_NAME = "green"
ETHTOOL_A_LINKMODES_AUTONEG = on
ETHTOOL_A_LINKMODES_OURS
ETHTOOL_A_BITSET_SIZE = 90
ETHTOOL_A_BITSET_BITS
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 0
ETHTOOL_A_BITSET_BIT_NAME = "10baseT/Half"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 1
ETHTOOL_A_BITSET_BIT_NAME = "10baseT/Full"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 2
ETHTOOL_A_BITSET_BIT_NAME = "100baseT/Half"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 3
ETHTOOL_A_BITSET_BIT_NAME = "100baseT/Full"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 5
ETHTOOL_A_BITSET_BIT_NAME = "1000baseT/Full"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 6
ETHTOOL_A_BITSET_BIT_NAME = "Autoneg"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 7
ETHTOOL_A_BITSET_BIT_NAME = "TP"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 9
ETHTOOL_A_BITSET_BIT_NAME = "MII"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 13
ETHTOOL_A_BITSET_BIT_NAME = "Pause"
ETHTOOL_A_BITSET_BIT_VALUE = true
ETHTOOL_A_LINKMODES_PEER
ETHTOOL_A_BITSET_NOMASK = true
ETHTOOL_A_BITSET_SIZE = 90
ETHTOOL_A_BITSET_BITS
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 0
ETHTOOL_A_BITSET_BIT_NAME = "10baseT/Half"
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 1
ETHTOOL_A_BITSET_BIT_NAME = "10baseT/Full"
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 2
ETHTOOL_A_BITSET_BIT_NAME = "100baseT/Half"
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 3
ETHTOOL_A_BITSET_BIT_NAME = "100baseT/Full"
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 5
ETHTOOL_A_BITSET_BIT_NAME = "1000baseT/Full"
ETHTOOL_A_BITSET_BITS_BIT
ETHTOOL_A_BITSET_BIT_INDEX = 6
ETHTOOL_A_BITSET_BIT_NAME = "Autoneg"
ETHTOOL_A_LINKMODES_SPEED = 1000
ETHTOOL_A_LINKMODES_DUPLEX = 1
Settings for green:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: No
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
received genetlink packet (36 bytes):
msg length 36 error errno=0
sending genetlink packet (36 bytes):
msg length 36 ethool ETHTOOL_MSG_LINKINFO_GET
ETHTOOL_MSG_LINKINFO_GET
ETHTOOL_A_LINKINFO_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
received genetlink packet (84 bytes):
msg length 84 ethool ETHTOOL_MSG_LINKINFO_GET_REPLY
ETHTOOL_MSG_LINKINFO_GET_REPLY
ETHTOOL_A_LINKINFO_HEADER
ETHTOOL_A_HEADER_DEV_INDEX = 8
ETHTOOL_A_HEADER_DEV_NAME = "green"
ETHTOOL_A_LINKINFO_PORT = 2
ETHTOOL_A_LINKINFO_PHYADDR = 4
ETHTOOL_A_LINKINFO_TP_MDIX = 0
ETHTOOL_A_LINKINFO_TP_MDIX_CTRL = 0
ETHTOOL_A_LINKINFO_TRANSCEIVER = 1
Port: MII
PHYAD: 4
Transceiver: external
received genetlink packet (36 bytes):
msg length 36 error errno=0
sending genetlink packet (36 bytes):
msg length 36 ethool ETHTOOL_MSG_WOL_GET
ETHTOOL_MSG_WOL_GET
ETHTOOL_A_WOL_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
received genetlink packet (60 bytes):
msg length 60 ethool ETHTOOL_MSG_WOL_GET_REPLY
ETHTOOL_MSG_WOL_GET_REPLY
ETHTOOL_A_WOL_HEADER
ETHTOOL_A_HEADER_DEV_INDEX = 8
ETHTOOL_A_HEADER_DEV_NAME = "green"
ETHTOOL_A_WOL_MODES
ETHTOOL_A_BITSET_SIZE = 8
ETHTOOL_A_BITSET_BITS
Supports Wake-on: d
Wake-on: d
received genetlink packet (36 bytes):
msg length 36 error errno=0
sending genetlink packet (36 bytes):
msg length 36 ethool ETHTOOL_MSG_DEBUG_GET
ETHTOOL_MSG_DEBUG_GET
ETHTOOL_A_DEBUG_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
received genetlink packet (56 bytes):
msg length 56 error errno=-95
offending message:
ETHTOOL_MSG_DEBUG_GET
ETHTOOL_A_DEBUG_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
sending genetlink packet (36 bytes):
msg length 36 ethool ETHTOOL_MSG_LINKSTATE_GET
ETHTOOL_MSG_LINKSTATE_GET
ETHTOOL_A_LINKSTATE_HEADER
ETHTOOL_A_HEADER_DEV_NAME = "green"
received genetlink packet (52 bytes):
msg length 52 ethool ETHTOOL_MSG_LINKSTATE_GET_REPLY
ETHTOOL_MSG_LINKSTATE_GET_REPLY
ETHTOOL_A_LINKSTATE_HEADER
ETHTOOL_A_HEADER_DEV_INDEX = 8
ETHTOOL_A_HEADER_DEV_NAME = "green"
ETHTOOL_A_LINKSTATE_LINK = on
Link detected: yes
received genetlink packet (36 bytes):
msg length 36 error errno=0
I also get similar results from a USB-Ethernet Dongle:
# ethtool enx0050b61b0207
Settings for enx0050b61b0207:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 16
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: p
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
# /home/andrew/ethtool/ethtool enx0050b61b0207
Settings for enx0050b61b0207:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: No
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
Port: MII
PHYAD: 16
Transceiver: internal
Supports Wake-on: pg
Wake-on: p
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
next prev parent reply other threads:[~2020-07-27 21:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 15:47 Broken link partner advertised reporting in ethtool Jamie Gloudon
2020-07-27 19:19 ` Jacob Keller
2020-07-27 20:09 ` Jamie Gloudon
2020-07-27 20:42 ` Michal Kubecek
2020-07-27 21:01 ` Andrew Lunn [this message]
2020-07-27 21:08 ` Michal Kubecek
2020-07-27 21:25 ` Andrew Lunn
2020-07-27 21:30 ` Jacob Keller
2020-07-27 21:42 ` Jacob Keller
2020-07-27 21:27 ` Jacob Keller
2020-07-27 22:00 ` Michal Kubecek
2020-07-27 22:15 ` Jacob Keller
2020-07-27 21:18 ` Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200727210141.GA1705504@lunn.ch \
--to=andrew@lunn.ch \
--cc=jacob.e.keller@intel.com \
--cc=jamie.gloudon@gmx.fr \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.