[PATCH 3/7] interconnect: qcom: Lay the groundwork for adding EPSS support

[Sibi Sankar <sibis@codeaurora.org>]

Lay the groundwork for adding Epoch Subsystem (EPSS) L3 support on
SM8250.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/interconnect/qcom/osm-l3.c | 37 +++++++++++++++++++++---------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 00831c33e0fe5..27c9ece52efda 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -21,13 +21,13 @@
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
 #define LUT_L_VAL			GENMASK(7, 0)
-#define LUT_ROW_SIZE			32
 #define CLK_HW_DIV			2
 
-/* Register offsets */
+/* OSM Register offsets */
 #define REG_ENABLE			0x0
-#define REG_FREQ_LUT			0x110
-#define REG_PERF_STATE			0x920
+#define OSM_LUT_ROW_SIZE		32
+#define OSM_REG_FREQ_LUT		0x110
+#define OSM_REG_PERF_STATE		0x920
 
 #define OSM_L3_MAX_LINKS		1
 
@@ -37,6 +37,7 @@
 struct qcom_osm_l3_icc_provider {
 	void __iomem *base;
 	unsigned int max_state;
+	unsigned int reg_perf_state;
 	unsigned long lut_tables[LUT_MAX_ENTRIES];
 	struct icc_provider provider;
 };
@@ -60,6 +61,9 @@ struct qcom_icc_node {
 struct qcom_icc_desc {
 	struct qcom_icc_node **nodes;
 	size_t num_nodes;
+	unsigned int lut_row_size;
+	unsigned int reg_freq_lut;
+	unsigned int reg_perf_state;
 };
 
 #define DEFINE_QNODE(_name, _id, _buswidth, ...)			\
@@ -82,6 +86,9 @@ static struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
 static const struct qcom_icc_desc sdm845_icc_osm_l3 = {
 	.nodes = sdm845_osm_l3_nodes,
 	.num_nodes = ARRAY_SIZE(sdm845_osm_l3_nodes),
+	.lut_row_size = OSM_LUT_ROW_SIZE,
+	.reg_freq_lut = OSM_REG_FREQ_LUT,
+	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
 DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, SC7180_SLAVE_OSM_L3);
@@ -95,6 +102,9 @@ static struct qcom_icc_node *sc7180_osm_l3_nodes[] = {
 static const struct qcom_icc_desc sc7180_icc_osm_l3 = {
 	.nodes = sc7180_osm_l3_nodes,
 	.num_nodes = ARRAY_SIZE(sc7180_osm_l3_nodes),
+	.lut_row_size = OSM_LUT_ROW_SIZE,
+	.reg_freq_lut = OSM_REG_FREQ_LUT,
+	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
 DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, SM8150_SLAVE_OSM_L3);
@@ -108,6 +118,9 @@ static struct qcom_icc_node *sm8150_osm_l3_nodes[] = {
 static const struct qcom_icc_desc sm8150_icc_osm_l3 = {
 	.nodes = sm8150_osm_l3_nodes,
 	.num_nodes = ARRAY_SIZE(sm8150_osm_l3_nodes),
+	.lut_row_size = OSM_LUT_ROW_SIZE,
+	.reg_freq_lut = OSM_REG_FREQ_LUT,
+	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
 static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
@@ -138,7 +151,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 			break;
 	}
 
-	writel_relaxed(index, qp->base + REG_PERF_STATE);
+	writel_relaxed(index, qp->base + qp->reg_perf_state);
 
 	return 0;
 }
@@ -193,9 +206,15 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	desc = device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	qp->reg_perf_state = desc->reg_perf_state;
+
 	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
-		info = readl_relaxed(qp->base + REG_FREQ_LUT +
-				     i * LUT_ROW_SIZE);
+		info = readl_relaxed(qp->base + desc->reg_freq_lut +
+				     i * desc->lut_row_size);
 		src = FIELD_GET(LUT_SRC, info);
 		lval = FIELD_GET(LUT_L_VAL, info);
 		if (src)
@@ -214,10 +233,6 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 	}
 	qp->max_state = i;
 
-	desc = device_get_match_data(&pdev->dev);
-	if (!desc)
-		return -EINVAL;
-
 	qnodes = desc->nodes;
 	num_nodes = desc->num_nodes;
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project