From: Oded Gabbay <oded.gabbay@gmail.com>
To: linux-kernel@vger.kernel.org, SW_Drivers@habana.ai
Cc: Ofir Bitton <obitton@habana.ai>
Subject: [PATCH 3/4] habanalabs: proper handling of alloc size in coresight
Date: Sun, 9 Aug 2020 14:53:36 +0300 [thread overview]
Message-ID: <20200809115337.23402-3-oded.gabbay@gmail.com> (raw)
In-Reply-To: <20200809115337.23402-1-oded.gabbay@gmail.com>
From: Ofir Bitton <obitton@habana.ai>
Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
drivers/misc/habanalabs/common/habanalabs.h | 2 +-
drivers/misc/habanalabs/gaudi/gaudi_coresight.c | 8 +++++++-
drivers/misc/habanalabs/goya/goya_coresight.c | 8 +++++++-
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 018d9d67e8e6..13c18f3d9a9b 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -1651,7 +1651,7 @@ struct hl_ioctl_desc {
*
* Return: true if the area is inside the valid range, false otherwise.
*/
-static inline bool hl_mem_area_inside_range(u64 address, u32 size,
+static inline bool hl_mem_area_inside_range(u64 address, u64 size,
u64 range_start_address, u64 range_end_address)
{
u64 end_address = address + size;
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
index 5673ee49819e..881531d4d9da 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
@@ -527,7 +527,7 @@ static int gaudi_config_etf(struct hl_device *hdev,
}
static bool gaudi_etr_validate_address(struct hl_device *hdev, u64 addr,
- u32 size, bool *is_host)
+ u64 size, bool *is_host)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
struct gaudi_device *gaudi = hdev->asic_specific;
@@ -539,6 +539,12 @@ static bool gaudi_etr_validate_address(struct hl_device *hdev, u64 addr,
return false;
}
+ if (addr > (addr + size)) {
+ dev_err(hdev->dev,
+ "ETR buffer size %llu overflow\n", size);
+ return false;
+ }
+
/* PMMU and HPMMU addresses are equal, check only one of them */
if ((gaudi->hw_cap_initialized & HW_CAP_MMU) &&
hl_mem_area_inside_range(addr, size,
diff --git a/drivers/misc/habanalabs/goya/goya_coresight.c b/drivers/misc/habanalabs/goya/goya_coresight.c
index b03912483de0..4027a6a334d7 100644
--- a/drivers/misc/habanalabs/goya/goya_coresight.c
+++ b/drivers/misc/habanalabs/goya/goya_coresight.c
@@ -362,11 +362,17 @@ static int goya_config_etf(struct hl_device *hdev,
}
static int goya_etr_validate_address(struct hl_device *hdev, u64 addr,
- u32 size)
+ u64 size)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
u64 range_start, range_end;
+ if (addr > (addr + size)) {
+ dev_err(hdev->dev,
+ "ETR buffer size %llu overflow\n", size);
+ return false;
+ }
+
if (hdev->mmu_enable) {
range_start = prop->dmmu.start_addr;
range_end = prop->dmmu.end_addr;
--
2.17.1
next prev parent reply other threads:[~2020-08-09 11:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-09 11:53 [PATCH 1/4] habanalabs: verify user input in cs_ioctl_signal_wait Oded Gabbay
2020-08-09 11:53 ` [PATCH 2/4] habanalabs: set clock gating according to mask Oded Gabbay
2020-08-09 11:53 ` Oded Gabbay [this message]
2020-08-09 11:53 ` [PATCH 4/4] habanalabs: set max power according to card type Oded Gabbay
2020-08-09 14:52 ` kernel test robot
2020-08-09 14:52 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200809115337.23402-3-oded.gabbay@gmail.com \
--to=oded.gabbay@gmail.com \
--cc=SW_Drivers@habana.ai \
--cc=linux-kernel@vger.kernel.org \
--cc=obitton@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.