From: Frank Wunderlich <linux@fw-web.de>
To: u-boot@lists.denx.de
Subject: [PATCH 0/5] add SATA/AHCI support for BananaPi R64
Date: Mon, 10 Aug 2020 16:58:46 +0200 [thread overview]
Message-ID: <20200810145851.43381-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
BananaPi R64 has an SATA socket where an HDD can be connected.
I have ported Linux Driver to Uboot and can access my harddrive
BPI-R64> scsi scan
scanning bus for devices...
Target spinup took 0 ms.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq stag pm clo only pmp pio slum part ccc apst
Device 0: (0:0) Vendor: ATA Prod.: ST750LM022 HN-M7 Rev: 2AR1
Type: Hard Disk
Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512)
BPI-R64> ls scsi 0:1
EFI/
512 BOOTSECT.BAK
1 file(s), 1 dir(s)
BPI-R64>
this Series is based on 2020.10-rc1 + mt7622 PCIe series [1]
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=194888
Frank Wunderlich (5):
arm: dts: mt7622: add SATA reset constants
phy: mtk-tphy: add PHY_TYPE_SATA
reset: add basic reset controller for pciesys
ahci: mediatek: add ahci driver
dts: r64: add sata- and asm_sel nodes
arch/arm/dts/mt7622-bpi-r64.dts | 9 ++
arch/arm/dts/mt7622.dtsi | 44 +++++
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
drivers/ata/mtk_ahci.c | 194 +++++++++++++++++++++++
drivers/clk/mediatek/clk-mt7622.c | 15 ++
drivers/phy/phy-mtk-tphy.c | 105 ++++++++++++
include/dt-bindings/reset/mt7629-reset.h | 5 +-
8 files changed, 380 insertions(+), 1 deletion(-)
create mode 100644 drivers/ata/mtk_ahci.c
--
2.25.1
next reply other threads:[~2020-08-10 14:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-10 14:58 Frank Wunderlich [this message]
2020-08-10 14:58 ` [PATCH 1/5] arm: dts: mt7622: add SATA reset constants Frank Wunderlich
2020-08-10 14:58 ` [PATCH 2/5] phy: mtk-tphy: add PHY_TYPE_SATA Frank Wunderlich
2020-08-10 14:58 ` [PATCH 3/5] reset: add basic reset controller for pciesys Frank Wunderlich
2020-08-10 14:58 ` [PATCH 4/5] ahci: mediatek: add ahci driver Frank Wunderlich
2020-08-10 14:58 ` [PATCH 5/5] dts: r64: add sata- and asm_sel nodes Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200810145851.43381-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.