From: Frank Wunderlich <linux@fw-web.de>
To: u-boot@lists.denx.de
Subject: [PATCH 2/3] arm: dts: mt7622: add USB nodes
Date: Fri, 14 Aug 2020 09:15:09 +0200 [thread overview]
Message-ID: <20200814071510.6869-3-linux@fw-web.de> (raw)
In-Reply-To: <20200814071510.6869-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
Add DTS nodes for MT7622/BPI-R64
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
this is based on xHCI driver Update (0.96 support) [1] and BPI-R64 DTS [2]
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=195331
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=194922
---
arch/arm/dts/mt7622-bpi-r64.dts | 8 +++++
arch/arm/dts/mt7622.dtsi | 64 +++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/arm/dts/mt7622-bpi-r64.dts b/arch/arm/dts/mt7622-bpi-r64.dts
index aaa4d9a246..7f780db1a5 100644
--- a/arch/arm/dts/mt7622-bpi-r64.dts
+++ b/arch/arm/dts/mt7622-bpi-r64.dts
@@ -244,3 +244,11 @@
output-low;
};
};
+
+&ssusb {
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/mt7622.dtsi b/arch/arm/dts/mt7622.dtsi
index 2802909671..e94884ad66 100644
--- a/arch/arm/dts/mt7622.dtsi
+++ b/arch/arm/dts/mt7622.dtsi
@@ -81,6 +81,12 @@
#clock-cells = <0>;
};
+ clk25m: dummy25m {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
infracfg: infracfg at 10000000 {
compatible = "mediatek,mt7622-infracfg",
"syscon";
@@ -192,6 +198,14 @@
status = "disabled";
};
+ ssusbsys: ssusbsys at 1a000000 {
+ compatible = "mediatek,mt7622-ssusbsys",
+ "syscon";
+ reg = <0x1a000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
pciesys: pciesys at 1a100800 {
compatible = "mediatek,mt7622-pciesys", "syscon";
reg = <0x1a100800 0x1000>;
@@ -314,6 +328,56 @@
};
};
+ ssusb: usb at 1a0c0000 {
+ compatible = "mediatek,mt7622-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0x1a0c0000 0x01000>,
+ <0x1a0c4700 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+ <&ssusbsys CLK_SSUSB_REF_EN>,
+ <&ssusbsys CLK_SSUSB_MCU_EN>,
+ <&ssusbsys CLK_SSUSB_DMA_EN>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+ u3phy: usb-phy at 1a0c4000 {
+ compatible = "mediatek,mt7622-u3phy",
+ "mediatek,generic-tphy-v1";
+ reg = <0x1a0c4000 0x700>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy at 1a0c4800 {
+ reg = <0x1a0c4800 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy at 1a0c4900 {
+ reg = <0x1a0c4900 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
+
+ u2port1: usb-phy at 1a0c5000 {
+ reg = <0x1a0c5000 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+ clock-names = "ref";
+ };
+ };
+
ethsys: syscon at 1b000000 {
compatible = "mediatek,mt7622-ethsys", "syscon";
reg = <0x1b000000 0x1000>;
--
2.25.1
next prev parent reply other threads:[~2020-08-14 7:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-14 7:15 [PATCH 0/3] Add USB for MT7622/MT7623 Frank Wunderlich
2020-08-14 7:15 ` [PATCH 1/3] clk: mt7622: add needed clocks for ssusb-node Frank Wunderlich
2020-08-14 7:15 ` Frank Wunderlich [this message]
2020-08-14 7:15 ` [PATCH 3/3] arm: dts: mt7623: add USB nodes Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200814071510.6869-3-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.