Re: [PATCH v2] iio: documentation: light: Add as73211 sysfs documentation

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 10 Aug 2020 07:24:47 +0200
Christian Eggers <ceggers@arri.de> wrote:

> The driver for the as73211 light sensor provides the following not yet
> documented sysfs entries:
> - in_intensity_(x|y|z)_raw
> - in_intensity_(x|y|z)_scale
> - in_intensity_sampling_frequency(_available)
> - in_intensity_hardwaregain(_available)
> - in_intensity_integration_time
> 
> Signed-off-by: Christian Eggers <ceggers@arri.de>
Applied.

Thanks,

Jonathan

> ---
> Jonathan Cameron:
> > If it is shared across 'ALL' channels then it will be just integration_time
> > If it is shared across all channels of a given type, it will be <type>_integration_time.  
> changed.
> 
> Best regards
> Christian Eggers
> 
>  Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index d3e53a6d8331..388560149875 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -40,6 +40,7 @@ Description:
>  		buffered samples and events for device X.
>  
>  What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
>  What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
>  What:		/sys/bus/iio/devices/triggerX/sampling_frequency
>  KernelVersion:	2.6.35
> @@ -55,6 +56,7 @@ Description:
>  		then it is to be found in the base device directory.
>  
>  What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
>  What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
>  What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
>  What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
> @@ -374,6 +376,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
>  KernelVersion:	2.6.35
>  Contact:	linux-iio@vger.kernel.org
>  Description:
> @@ -484,6 +489,7 @@ Description:
>  		are listed in this attribute.
>  
>  What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
>  What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
>  What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
>  What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
> @@ -494,6 +500,13 @@ Description:
>  		Hardware applied gain factor. If shared across all channels,
>  		<type>_hardwaregain is used.
>  
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
> +KernelVersion:	5.10
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Lists all available hardware applied gain factors. Shared across all
> +		channels.
> +
>  What:		/sys/.../in_accel_filter_low_pass_3db_frequency
>  What:		/sys/.../in_magn_filter_low_pass_3db_frequency
>  What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
> @@ -1333,6 +1346,7 @@ Description:
>  		standardised CIE Erythemal Action Spectrum. UV index values range
>  		from 0 (low) to >=11 (extreme).
>  
> +What:		/sys/.../iio:deviceX/in_intensity_integration_time
>  What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
>  What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
>  What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
> @@ -1342,7 +1356,8 @@ KernelVersion:	3.12
>  Contact:	linux-iio@vger.kernel.org
>  Description:
>  		This attribute is used to get/set the integration time in
> -		seconds.
> +		seconds. If shared across all channels of a given type,
> +		<type>_integration_time is used.
>  
>  What:		/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
>  KernelVersion:	4.0
> @@ -1739,3 +1754,12 @@ KernelVersion:	5.5
>  Contact:	linux-iio@vger.kernel.org
>  Description:
>  		One of the following thermocouple types: B, E, J, K, N, R, S, T.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
> +KernelVersion:	5.10
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Unscaled light intensity according to CIE 1931/DIN 5033 color space.
> +		Units after application of scale are nano nanowatts per square meter.