From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 20 Aug 2020 08:40:53 -0400 Subject: [PATCH v3 5/5] dts: r64: add sata- and asm_sel nodes In-Reply-To: <20200813082048.19225-6-linux@fw-web.de> References: <20200813082048.19225-1-linux@fw-web.de> <20200813082048.19225-6-linux@fw-web.de> Message-ID: <20200820124053.GR20605@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Aug 13, 2020 at 10:20:48AM +0200, Frank Wunderlich wrote: > From: Frank Wunderlich > > asm_sel is for switching between sata and pcie mode > on r64 there is GPIO90 connected to ASM1480 which > switches RX/TX pairs to PCIe/SATA connector > output-low means sata-controller is active > > with 2020-10 now reg is also needed for the phy itself > > Signed-off-by: Frank Wunderlich Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: