All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ed Czeck <ed.czeck@atomicrules.com>
To: dev@dpdk.org, ferruh.yigit@intel.com, bruce.richardson@intel.com
Cc: shepard.siegel@atomicrules.com, john.miller@atomicrules.com,
	Ed Czeck <ed.czeck@atomicrules.com>
Subject: [dpdk-dev] [PATCH 2/2] net/ark: remove RTE_LIBRTE_ARK_PAD_TX configuration macro
Date: Wed, 26 Aug 2020 11:24:12 -0400	[thread overview]
Message-ID: <20200826152412.9553-2-ed.czeck@atomicrules.com> (raw)
In-Reply-To: <20200826152412.9553-1-ed.czeck@atomicrules.com>

Replace behavior with RTE_LIBRTE_ARK_MIN_TX_PKTLEN
with a default value of 0.
Update documentation as needed.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
---
 doc/guides/nics/ark.rst         | 16 ++++++++----
 drivers/net/ark/ark_ethdev_tx.c | 44 +++++++++++++++++++--------------
 drivers/net/ark/ark_logs.h      |  8 ------
 3 files changed, 36 insertions(+), 32 deletions(-)

diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
index c3ffcbbc2..c7ed4095f 100644
--- a/doc/guides/nics/ark.rst
+++ b/doc/guides/nics/ark.rst
@@ -126,11 +126,10 @@ Configuration Information
 
   The following configuration options are available for the ARK PMD:
 
-   * **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion
-     of the ARK PMD driver in the DPDK compilation.
-
-   * **CONFIG_RTE_LIBRTE_ARK_PAD_TX** (default y):  When enabled TX
-     packets are padded to 60 bytes to support downstream MACS.
+   * **RTE_LIBRTE_ARK_MIN_TX_PKTLEN** (default 0): Sets the minimum
+     packet length for tx packets to the FPGA.  Packets less than this
+     length are padded to meet the requirement. This allows padding to
+     be offloaded or remain in host software.
 
 
 Building DPDK
@@ -144,6 +143,13 @@ By default the ARK PMD library will be built into the DPDK library.
 For configuring and using UIO and VFIO frameworks, please also refer :ref:`the
 documentation that comes with DPDK suite <linux_gsg>`.
 
+To build with a non-zero minimum tx packet length, set the above macro in your
+CFLAGS environment prior to the meson build step. I.e.,
+
+    export CFLAGS="-DRTE_LIBRTE_ARK_MIN_TX_PKTLEN=60"
+    meson build
+
+
 Supported ARK RTL PCIe Instances
 --------------------------------
 
diff --git a/drivers/net/ark/ark_ethdev_tx.c b/drivers/net/ark/ark_ethdev_tx.c
index 72624deb3..d24d7ac21 100644
--- a/drivers/net/ark/ark_ethdev_tx.c
+++ b/drivers/net/ark/ark_ethdev_tx.c
@@ -15,6 +15,13 @@
 #define ARK_TX_MAX_NOCHAIN (RTE_MBUF_DEFAULT_DATAROOM)
 
 
+#ifndef RTE_LIBRTE_ARK_MIN_TX_PKTLEN
+#define ARK_MIN_TX_PKTLEN 0
+#else
+#define ARK_MIN_TX_PKTLEN RTE_LIBRTE_ARK_MIN_TX_PKTLEN
+#endif
+
+
 /* ************************************************************************* */
 struct ark_tx_queue {
 	struct ark_tx_meta *meta_q;
@@ -91,6 +98,7 @@ eth_ark_xmit_pkts(void *vtxq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 	uint32_t prod_index_limit;
 	int stat;
 	uint16_t nb;
+	const uint32_t min_pkt_len = ARK_MIN_TX_PKTLEN;
 
 	queue = (struct ark_tx_queue *)vtxq;
 
@@ -104,27 +112,25 @@ eth_ark_xmit_pkts(void *vtxq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 	     ++nb) {
 		mbuf = tx_pkts[nb];
 
-		if (ARK_TX_PAD_TO_60) {
-			if (unlikely(rte_pktmbuf_pkt_len(mbuf) < 60)) {
-				/* this packet even if it is small can be split,
-				 * be sure to add to the end mbuf
+		if (unlikely(rte_pktmbuf_pkt_len(mbuf) < min_pkt_len)) {
+			/* this packet even if it is small can be split,
+			 * be sure to add to the end mbuf
+			 */
+			uint16_t to_add = min_pkt_len -
+				rte_pktmbuf_pkt_len(mbuf);
+			char *appended =
+				rte_pktmbuf_append(mbuf, to_add);
+
+			if (appended == 0) {
+				/* This packet is in error,
+				 * we cannot send it so just
+				 * count it and delete it.
 				 */
-				uint16_t to_add =
-					60 - rte_pktmbuf_pkt_len(mbuf);
-				char *appended =
-					rte_pktmbuf_append(mbuf, to_add);
-
-				if (appended == 0) {
-					/* This packet is in error,
-					 * we cannot send it so just
-					 * count it and delete it.
-					 */
-					queue->tx_errors += 1;
-					rte_pktmbuf_free(mbuf);
-					continue;
-				}
-				memset(appended, 0, to_add);
+				queue->tx_errors += 1;
+				rte_pktmbuf_free(mbuf);
+				continue;
 			}
+			memset(appended, 0, to_add);
 		}
 
 		if (unlikely(mbuf->nb_segs != 1)) {
diff --git a/drivers/net/ark/ark_logs.h b/drivers/net/ark/ark_logs.h
index c3d7e7d39..ca46d86c9 100644
--- a/drivers/net/ark/ark_logs.h
+++ b/drivers/net/ark/ark_logs.h
@@ -8,14 +8,6 @@
 #include <inttypes.h>
 #include <rte_log.h>
 
-
-/* Configuration option to pad TX packets to 60 bytes */
-#ifdef RTE_LIBRTE_ARK_PAD_TX
-#define ARK_TX_PAD_TO_60   1
-#else
-#define ARK_TX_PAD_TO_60   0
-#endif
-
 /* system camel case definition changed to upper case */
 #define PRIU32 PRIu32
 #define PRIU64 PRIu64
-- 
2.17.1


  reply	other threads:[~2020-08-26 15:25 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 15:35 [dpdk-dev] [PATCH] net/ark: fix meson build Ed Czeck
2020-08-19 16:29 ` Ferruh Yigit
2020-08-19 20:45 ` Ed Czeck
2020-08-20 11:16   ` Ferruh Yigit
2020-08-20 15:41     ` Ed Czeck
2020-08-21  9:44       ` Ferruh Yigit
2020-08-20 21:55 ` [dpdk-dev] [PATCH 1/2] net/ark: remove compile time log macros in favor of run time log control Ed Czeck
2020-08-20 21:55   ` [dpdk-dev] [PATCH 2/2] net/ark remove ARK_TX_PAD_TO_60 configuration macro Ed Czeck
2020-08-21  9:50     ` Ferruh Yigit
2020-08-24 13:36 ` [dpdk-dev] [PATCH 1/2] net/ark: remove compile time log macros in favor of run time log control Ed Czeck
2020-08-24 13:36   ` [dpdk-dev] [PATCH 2/2] net/ark: remove RTE_LIBRTE_ARK_PAD_TX configuration macro Ed Czeck
2020-08-24 14:55     ` Ferruh Yigit
2020-08-24 21:51       ` Ed Czeck
2020-08-25  7:43         ` Ferruh Yigit
2020-08-24 14:37   ` [dpdk-dev] [PATCH 1/2] net/ark: remove compile time log macros in favor of run time log control Ferruh Yigit
2020-08-24 14:40     ` Bruce Richardson
2020-08-24 15:09       ` Ferruh Yigit
2020-08-24 21:40         ` Ed Czeck
2020-08-25  7:44           ` Ferruh Yigit
2020-08-26 15:24 ` Ed Czeck
2020-08-26 15:24   ` Ed Czeck [this message]
2020-08-27 16:11 ` Ed Czeck
2020-08-27 16:11   ` [dpdk-dev] [PATCH 2/2] net/ark: remove RTE_LIBRTE_ARK_PAD_TX configuration macro Ed Czeck
2020-09-01 11:17     ` Ferruh Yigit
2020-09-08 19:20 ` [dpdk-dev] [PATCH v7 1/2] net/ark: remove compile time log macros in favor of run time log control Ed Czeck
2020-09-08 19:20   ` [dpdk-dev] [PATCH v7 2/2] net/ark: remove RTE_LIBRTE_ARK_PAD_TX configuration macro Ed Czeck
2020-09-09 13:33   ` [dpdk-dev] [PATCH v7 1/2] net/ark: remove compile time log macros in favor of run time log control Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200826152412.9553-2-ed.czeck@atomicrules.com \
    --to=ed.czeck@atomicrules.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=john.miller@atomicrules.com \
    --cc=shepard.siegel@atomicrules.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.