From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Mike Leach <mike.leach@linaro.org>
Cc: coresight@lists.linaro.org, suzuki.poulose@arm.com,
linux-arm-kernel@lists.infradead.org, leo.yan@linaro.org
Subject: Re: [PATCH v2 1/1] coresight: etm4x: Ensure default perf settings filter user/kernel
Date: Thu, 27 Aug 2020 14:10:10 -0600 [thread overview]
Message-ID: <20200827201010.GC22307@xps15> (raw)
In-Reply-To: <20200819211015.28448-2-mike.leach@linaro.org>
On Wed, Aug 19, 2020 at 10:10:15PM +0100, Mike Leach wrote:
> Moving from using an address filter to trace the default "all addresses"
> range to no filtering to acheive the same result, has caused the perf
> filtering of kernel/user address spaces from not working unless an
> explicit address filter was used.
>
> This is due to the original code using a side-effect of the address
> filtering rather than setting the global TRCVICTLR exception level
> filtering.
>
> The use of the mode sysfs file is also similarly affected.
>
> A helper function is added to fix both instances.
>
> Fixes: ae2041510d5d5 ("coresight: etmv4: Update default filter and initialisation")
> Reported-by: Leo Yan <leo.yan@linaro.org>
> Signed-off-by: Mike Leach <mike.leach@linaro.org>
> Reviewed-by: Leo Yan <leo.yan@linaro.org>
> Tested-by: Leo Yan <leo.yan@linaro.org>
> ---
Applied
Thanks,
Mathieu
> drivers/hwtracing/coresight/coresight-etm4x.c | 32 +++++++++++++------
> drivers/hwtracing/coresight/coresight-etm4x.h | 3 ++
> 2 files changed, 25 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
> index 8b0634ebef77..522ff5418a35 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
> @@ -52,6 +52,7 @@ static struct etmv4_drvdata *etmdrvdata[NR_CPUS];
> static void etm4_set_default_config(struct etmv4_config *config);
> static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
> struct perf_event *event);
> +static u64 etm4_get_access_type(struct etmv4_config *config);
>
> static enum cpuhp_state hp_online;
>
> @@ -783,6 +784,22 @@ static void etm4_init_arch_data(void *info)
> CS_LOCK(drvdata->base);
> }
>
> +/* Set ELx trace filter access in the TRCVICTLR register */
> +static void etm4_set_victlr_access(struct etmv4_config *config)
> +{
> + u64 access_type;
> +
> + config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK | ETM_EXLEVEL_NS_VICTLR_MASK);
> +
> + /*
> + * TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering
> + * bits in vinst_ctrl, same bit pattern as TRCACATRn values returned by
> + * etm4_get_access_type() but with a relative shift in this register.
> + */
> + access_type = etm4_get_access_type(config) << ETM_EXLEVEL_LSHIFT_TRCVICTLR;
> + config->vinst_ctrl |= (u32)access_type;
> +}
> +
> static void etm4_set_default_config(struct etmv4_config *config)
> {
> /* disable all events tracing */
> @@ -800,6 +817,9 @@ static void etm4_set_default_config(struct etmv4_config *config)
>
> /* TRCVICTLR::EVENT = 0x01, select the always on logic */
> config->vinst_ctrl = BIT(0);
> +
> + /* TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering */
> + etm4_set_victlr_access(config);
> }
>
> static u64 etm4_get_ns_access_type(struct etmv4_config *config)
> @@ -1064,7 +1084,7 @@ static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
>
> void etm4_config_trace_mode(struct etmv4_config *config)
> {
> - u32 addr_acc, mode;
> + u32 mode;
>
> mode = config->mode;
> mode &= (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER);
> @@ -1076,15 +1096,7 @@ void etm4_config_trace_mode(struct etmv4_config *config)
> if (!(mode & ETM_MODE_EXCL_KERN) && !(mode & ETM_MODE_EXCL_USER))
> return;
>
> - addr_acc = config->addr_acc[ETM_DEFAULT_ADDR_COMP];
> - /* clear default config */
> - addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS |
> - ETM_EXLEVEL_NS_HYP);
> -
> - addr_acc |= etm4_get_ns_access_type(config);
> -
> - config->addr_acc[ETM_DEFAULT_ADDR_COMP] = addr_acc;
> - config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = addr_acc;
> + etm4_set_victlr_access(config);
> }
>
> static int etm4_online_cpu(unsigned int cpu)
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
> index b8283e1d6d88..5259f96fd28a 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.h
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
> @@ -192,6 +192,9 @@
> #define ETM_EXLEVEL_NS_HYP BIT(14)
> #define ETM_EXLEVEL_NS_NA BIT(15)
>
> +/* access level control in TRCVICTLR - same bits as TRCACATRn but shifted */
> +#define ETM_EXLEVEL_LSHIFT_TRCVICTLR 8
> +
> /* secure / non secure masks - TRCVICTLR, IDR3 */
> #define ETM_EXLEVEL_S_VICTLR_MASK GENMASK(19, 16)
> /* NS MON (EL3) mode never implemented */
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-08-27 20:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 21:10 [PATCH v2 0/1] coresight: etm4x: Fix kernel / user space filtering in perf Mike Leach
2020-08-19 21:10 ` [PATCH v2 1/1] coresight: etm4x: Ensure default perf settings filter user/kernel Mike Leach
2020-08-27 20:10 ` Mathieu Poirier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200827201010.GC22307@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=coresight@lists.linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.