All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 06/17] i2c: tegra: Improve formatting of function variables
Date: Wed,  2 Sep 2020 00:10:51 +0300	[thread overview]
Message-ID: <20200901211102.11072-7-digetx@gmail.com> (raw)
In-Reply-To: <20200901211102.11072-1-digetx@gmail.com>

Reorder the definition of variables in the code in order to make code
easier to read.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 51 ++++++++++++++--------------------
 1 file changed, 21 insertions(+), 30 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index aa815e48f77e..16f105283145 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -419,8 +419,8 @@ static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev)
 static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 {
 	struct dma_chan *chan;
-	u32 *dma_buf;
 	dma_addr_t dma_phys;
+	u32 *dma_buf;
 	int err;
 
 	if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
@@ -513,11 +513,11 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
 
 static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 val;
-	int rx_fifo_avail;
-	u8 *buf = i2c_dev->msg_buf;
 	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	u8 *buf = i2c_dev->msg_buf;
 	int words_to_transfer;
+	int rx_fifo_avail;
+	u32 val;
 
 	/*
 	 * Catch overflow due to message fully sent
@@ -574,11 +574,11 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
 
 static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 val;
-	int tx_fifo_avail;
-	u8 *buf = i2c_dev->msg_buf;
 	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	u8 *buf = i2c_dev->msg_buf;
 	int words_to_transfer;
+	int tx_fifo_avail;
+	u32 val;
 
 	if (i2c_dev->hw->has_mst_fifo) {
 		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
@@ -784,11 +784,8 @@ static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
 
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 {
-	u32 val;
+	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh;
 	int err;
-	u32 clk_divisor, clk_multiplier;
-	u32 tsu_thd;
-	u8 tlow, thigh;
 
 	err = reset_control_reset(i2c_dev->rst);
 	if (WARN_ON_ONCE(err))
@@ -896,9 +893,9 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
 
 static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 {
-	u32 status;
 	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	struct tegra_i2c_dev *i2c_dev = dev_id;
+	u32 status;
 
 	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
@@ -1002,12 +999,11 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 				       size_t len)
 {
-	u32 val, reg;
-	u8 dma_burst;
 	struct dma_slave_config slv_config = {0};
+	unsigned long reg_offset;
+	u32 val, reg, dma_burst;
 	struct dma_chan *chan;
 	int ret;
-	unsigned long reg_offset;
 
 	if (i2c_dev->hw->has_mst_fifo)
 		reg = I2C_MST_FIFO_CONTROL;
@@ -1132,9 +1128,9 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
-	int err;
 	unsigned long time_left;
 	u32 reg;
+	int err;
 
 	reinit_completion(&i2c_dev->msg_complete);
 	reg = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
@@ -1170,14 +1166,12 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			      struct i2c_msg *msg,
 			      enum msg_end_type end_state)
 {
-	u32 packet_header;
-	u32 int_mask;
-	unsigned long time_left;
-	size_t xfer_size;
+	unsigned long time_left, xfer_time = 100;
+	u32 packet_header, int_mask;
 	u32 *buffer = NULL;
-	int err = 0;
+	size_t xfer_size;
 	bool dma;
-	u16 xfer_time = 100;
+	int err;
 
 	err = tegra_i2c_flush_fifos(i2c_dev);
 	if (err)
@@ -1371,8 +1365,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 			  int num)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
-	int i;
-	int ret;
+	int i, ret;
 
 	ret = pm_runtime_get_sync(i2c_dev->dev);
 	if (ret < 0) {
@@ -1427,8 +1420,8 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap)
 static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
 {
 	struct device_node *np = i2c_dev->dev->of_node;
-	int ret;
 	bool multi_mode;
+	int ret;
 
 	ret = of_property_read_u32(np, "clock-frequency",
 				   &i2c_dev->bus_clk_rate);
@@ -1654,14 +1647,12 @@ MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
 static int tegra_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct clk *div_clk, *fast_clk;
 	struct tegra_i2c_dev *i2c_dev;
+	phys_addr_t base_phys;
 	struct resource *res;
-	struct clk *div_clk;
-	struct clk *fast_clk;
 	void __iomem *base;
-	phys_addr_t base_phys;
-	int irq;
-	int ret;
+	int irq, ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base_phys = res->start;
-- 
2.27.0


  parent reply	other threads:[~2020-09-01 21:12 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 21:10 [PATCH v2 00/17] Improvements for Tegra I2C driver Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 01/17] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 02/17] i2c: tegra: Add missing newline before returns Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 03/17] i2c: tegra: Clean up messages in the code Dmitry Osipenko
     [not found]   ` <CAHp75Vf9ETJMibQGe4Nx7n4703GtgO1XBsE1yGwsk3TaSPTDHw@mail.gmail.com>
2020-09-01 21:37     ` Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 04/17] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 05/17] i2c: tegra: Use reset_control_reset() Dmitry Osipenko
2020-09-01 21:10 ` Dmitry Osipenko [this message]
2020-09-01 21:10 ` [PATCH v2 07/17] i2c: tegra: Use dev_err_probe() Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 08/17] i2c: tegra: Runtime PM always available on Tegra Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 09/17] i2c: tegra: Clean up probe function Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 10/17] i2c: tegra: Drop '_timeout' from wait/poll function names Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 11/17] i2c: tegra: Remove likely/unlikely from the code Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 12/17] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 13/17] i2c: tegra: Check errors for both positive and negative values Dmitry Osipenko
2020-09-01 21:10 ` [PATCH v2 14/17] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load() Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 15/17] i2c: tegra: Remove unnecessary whitespaces and newlines Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 16/17] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear() Dmitry Osipenko
2020-09-01 21:11 ` [PATCH v2 17/17] i2c: tegra: Improve driver module description Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200901211102.11072-7-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.