All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Laxman Dewangan" <ldewangan@nvidia.com>,
	"Wolfram Sang" <wsa@the-dreams.de>,
	"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>
Cc: linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 27/31] i2c: tegra: Clean up printk messages
Date: Sat,  5 Sep 2020 23:41:47 +0300	[thread overview]
Message-ID: <20200905204151.25343-28-digetx@gmail.com> (raw)
In-Reply-To: <20200905204151.25343-1-digetx@gmail.com>

This patch unifies style of all messages in the driver by starting them
with a lowercase letter and using consistent capitalization and wording
for all messages.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 33 ++++++++++++---------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3dd688e9462a..2dd97540f14f 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -377,7 +377,8 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
 					       len, dir, DMA_PREP_INTERRUPT |
 					       DMA_CTRL_ACK);
 	if (!dma_desc) {
-		dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
+		dev_err(i2c_dev->dev, "failed to get %s DMA descriptor\n",
+			i2c_dev->msg_read ? "RX" : "TX");
 		return -EINVAL;
 	}
 
@@ -418,7 +419,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 		return 0;
 
 	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
-		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
+		dev_dbg(i2c_dev->dev, "DMA support not enabled\n");
 		return 0;
 	}
 
@@ -444,7 +445,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
 				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
 	if (!dma_buf) {
-		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+		dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n");
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -541,7 +542,7 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 	err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
 				      1000, I2C_CONFIG_LOAD_TIMEOUT);
 	if (err) {
-		dev_warn(i2c_dev->dev, "timeout waiting for config load\n");
+		dev_err(i2c_dev->dev, "failed to load config\n");
 		return err;
 	}
 
@@ -825,7 +826,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
 	if (status == 0) {
-		dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+		dev_warn(i2c_dev->dev, "IRQ status 0 %08x %08x %08x\n",
 			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
 			 i2c_readl(i2c_dev, I2C_STATUS),
 			 i2c_readl(i2c_dev, I2C_CNFG));
@@ -970,8 +971,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		slv_config.device_fc = true;
 		ret = dmaengine_slave_config(chan, &slv_config);
 		if (ret) {
-			dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
-				ret);
+			dev_err(i2c_dev->dev, "DMA config failed: %d\n", ret);
 			dev_err(i2c_dev->dev, "falling back to PIO\n");
 			tegra_i2c_release_dma(i2c_dev);
 			i2c_dev->is_curr_dma_xfer = false;
@@ -1077,8 +1077,7 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 
 	val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
 	if (!(val & I2C_BC_STATUS)) {
-		dev_err(i2c_dev->dev,
-			"un-recovered arbitration lost\n");
+		dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
 		return -EIO;
 	}
 
@@ -1208,12 +1207,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_FROM_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err) {
-				dev_err(i2c_dev->dev,
-					"starting RX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
 
 		} else {
 			dma_sync_single_for_cpu(i2c_dev->dev,
@@ -1233,12 +1228,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						   xfer_size,
 						   DMA_TO_DEVICE);
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err) {
-				dev_err(i2c_dev->dev,
-					"starting TX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
 		} else {
 			tegra_i2c_fill_tx_fifo(i2c_dev);
 		}
@@ -1254,7 +1245,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	}
 
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
-	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
+	dev_dbg(i2c_dev->dev, "unmasked IRQ: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
 	if (i2c_dev->is_curr_dma_xfer) {
@@ -1297,7 +1288,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
 	if (time_left == 0) {
-		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
+		dev_err(i2c_dev->dev, "I2C transfer timed out\n");
 		err = -ETIMEDOUT;
 		goto reset_hardware;
 	}
-- 
2.27.0


  parent reply	other threads:[~2020-09-05 20:44 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-05 20:41 [PATCH v4 00/31] Improvements for Tegra I2C driver Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 01/31] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 02/31] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 03/31] i2c: tegra: Initialization div-clk rate unconditionally Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 04/31] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 05/31] i2c: tegra: Runtime PM always available on Tegra Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 06/31] i2c: tegra: Remove error message used for devm_request_irq() failure Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 07/31] i2c: tegra: Use reset_control_reset() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 08/31] i2c: tegra: Use devm_platform_get_and_ioremap_resource() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 09/31] i2c: tegra: Use platform_get_irq() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers Dmitry Osipenko
2020-09-05 21:56   ` Michał Mirosław
2020-09-05 22:08     ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization Dmitry Osipenko
2020-09-05 22:10   ` Michał Mirosław
2020-09-05 22:24     ` Dmitry Osipenko
2020-09-05 22:51       ` Michał Mirosław
2020-09-05 23:10         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 12/31] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 13/31] i2c: tegra: Clean up probe function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 14/31] i2c: tegra: Remove likely/unlikely from the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 15/31] i2c: tegra: Remove bogus barrier() Dmitry Osipenko
2020-09-05 23:35   ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 22:23   ` Michał Mirosław
2020-09-05 22:36     ` Dmitry Osipenko
2020-09-05 22:49       ` Michał Mirosław
2020-09-05 22:54         ` Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 17/31] i2c: tegra: Improve formatting of function variables Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 18/31] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 19/31] i2c: tegra: Rename wait/poll functions Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 20/31] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 21/31] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 22/31] i2c: tegra: Factor out packet header setup " Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 23/31] i2c: tegra: Factor out register polling into separate function Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 24/31] i2c: tegra: Reorder location of functions in the code Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 25/31] i2c: tegra: Check errors for both positive and negative values Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 26/31] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg() Dmitry Osipenko
2020-09-05 20:41 ` Dmitry Osipenko [this message]
2020-09-05 20:41 ` [PATCH v4 28/31] i2c: tegra: Clean up whitespaces, newlines and indentation Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 29/31] i2c: tegra: Improve driver module description Dmitry Osipenko
2020-09-05 20:41 ` [PATCH v4 30/31] i2c: tegra: Clean up and improve comments Dmitry Osipenko
2020-09-05 22:47   ` Michał Mirosław
2020-09-05 22:53     ` Dmitry Osipenko
2020-09-05 22:58       ` Michał Mirosław
2020-09-05 20:41 ` [PATCH v4 31/31] i2c: tegra: Rename couple "ret" variables to "err" Dmitry Osipenko
2020-09-05 23:16 ` [PATCH v4 00/31] Improvements for Tegra I2C driver Michał Mirosław
2020-09-05 23:35   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200905204151.25343-28-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=thierry.reding@gmail.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.