Re: [PATCH v2 3/3] tests/acpi: add a new ACPI table in order to test root pci hotplug on/off

["Michael S. Tsirkin" <mst@redhat.com>]

On Wed, Sep 02, 2020 at 08:33:35AM +0200, Igor Mammedov wrote:
> On Wed, 2 Sep 2020 11:48:00 +0530
> Ani Sinha <ani@anisinha.ca> wrote:
> 
> > On Tue, Sep 1, 2020 at 8:39 PM Ani Sinha <ani@anisinha.ca> wrote:
> > >
> > > A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
> > > to unit test hotplug on/off capability on the root pci bus for i440fx.
> > > The diff between the table DSDT.bridge and DSDT.roothp is listed below:
> > >
> > > @@ -1,30 +1,30 @@
> > >  /*
> > >   * Intel ACPI Component Architecture
> > >   * AML/ASL+ Disassembler version 20180105 (64-bit version)
> > >   * Copyright (c) 2000 - 2018 Intel Corporation
> > >   *
> > >   * Disassembling to symbolic ASL+ operators
> > >   *
> > > - * Disassembly of tests/data/acpi/pc/DSDT.bridge, Tue Sep  1 20:02:44 2020
> > > + * Disassembly of /tmp/aml-4FIZP0, Tue Sep  1 20:02:44 2020
> > >   *
> > >   * Original Table Header:
> > >   *     Signature        "DSDT"
> > > - *     Length           0x00001A89 (6793)
> > > + *     Length           0x0000140A (5130)
> > >   *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
> > > - *     Checksum         0x08
> > > + *     Checksum         0xE5
> > >   *     OEM ID           "BOCHS "
> > >   *     OEM Table ID     "BXPCDSDT"
> > >   *     OEM Revision     0x00000001 (1)
> > >   *     Compiler ID      "BXPC"
> > >   *     Compiler Version 0x00000001 (1)
> > >   */
> > >  DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
> > >  {
> > >      Scope (\)
> > >      {
> > >          OperationRegion (DBG, SystemIO, 0x0402, One)
> > >          Field (DBG, ByteAcc, NoLock, Preserve)
> > >          {
> > >              DBGB,   8
> > >          }
> > >
> > > @@ -831,61 +831,60 @@
> > >              Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
> > >              {
> > >                  IO (Decode16,
> > >                      0x0510,             // Range Minimum
> > >                      0x0510,             // Range Maximum
> > >                      0x01,               // Alignment
> > >                      0x0C,               // Length
> > >                      )
> > >              })
> > >          }
> > >      }
> > >
> > >      Scope (\_SB)
> > >      {
> > >          Scope (PCI0)
> > >          {
> > > -            Name (BSEL, Zero)
> > >              Device (S00)
> > >              {
> > >                  Name (_ADR, Zero)  // _ADR: Address
> > >              }
> > >
> > >              Device (S10)
> > >              {
> > >                  Name (_ADR, 0x00020000)  // _ADR: Address
> > >                  Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
> > >                  {
> > >                      Return (Zero)
> > >                  }
> > >
> > >                  Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
> > >                  {
> > >                      Return (Zero)
> > >                  }
> > >
> > >                  Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
> > >                  {
> > >                      Return (Zero)
> > >                  }
> > >              }
> > >
> > >              Device (S18)
> > >              {
> > >                  Name (_ADR, 0x00030000)  // _ADR: Address
> > > -                Name (BSEL, One)
> > > +                Name (BSEL, Zero)  
> > The bsel numbering is now starting from 0 for the bridge. I believe
> > this is because
> > 
> >        *bus_bsel = (*bsel_alloc)++;
> > 
> > The increment never happens for the root bus since the root bus is not
> > hotpluggable.
> 
> considering it needs an optional CLI option, it shouldn't be an issue.

Right. Defaults didn't change.

-- 
MST