From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Sebastian Reichel" <sre@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Andrew F. Davis" <afd@ti.com>, "Pali Rohár" <pali@kernel.org>,
"Dan Murphy" <dmurphy@ti.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] power: supply: bq27xxx: add support for TI bq34z100
Date: Tue, 8 Sep 2020 22:13:19 +0200 [thread overview]
Message-ID: <20200908201319.3567-7-krzk@kernel.org> (raw)
In-Reply-To: <20200908201319.3567-1-krzk@kernel.org>
Add support for new device: the TI bq34z100-G1, a Wide Range Fuel Gauge
for Li-Ion, PbA, NiMH, and NiCd batteries. The device shares a lot with
other models, although it has its own differences requiring new quirks.
This patch was tested on a system equipped with NiMH batteries.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/power/supply/bq27xxx_battery.c | 50 +++++++++++++++++++++-
drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
include/linux/power/bq27xxx_battery.h | 1 +
3 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index cda03e1f9586..315e0909e6a4 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -38,6 +38,7 @@
* https://www.ti.com/product/bq27621-g1
* https://www.ti.com/product/bq27z561
* https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
*/
#include <linux/device.h>
@@ -476,6 +477,26 @@ static u8
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = 0x22,
BQ27XXX_DM_REG_ROWS,
+ },
+ bq34z100_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x0c,
+ [BQ27XXX_REG_INT_TEMP] = 0x2a,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x0a,
+ [BQ27XXX_REG_FLAGS] = 0x0e,
+ [BQ27XXX_REG_TTE] = 0x18,
+ [BQ27XXX_REG_TTF] = 0x1a,
+ [BQ27XXX_REG_TTES] = 0x1e,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_FCC] = 0x06,
+ [BQ27XXX_REG_CYCT] = 0x2c,
+ [BQ27XXX_REG_AE] = 0x24,
+ [BQ27XXX_REG_SOC] = 0x02,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x22,
+ BQ27XXX_DM_REG_ROWS,
};
static enum power_supply_property bq27000_props[] = {
@@ -750,6 +771,27 @@ static enum power_supply_property bq28z610_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
+static enum power_supply_property bq34z100_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
struct bq27xxx_dm_reg {
u8 subclass_id;
u8 offset;
@@ -857,6 +899,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
#define BQ27Z561_O_BITS BIT(5)
#define BQ27XXX_O_SOC_SI BIT(6) /* SoC is single register */
#define BQ27XXX_O_HAS_CI BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM BIT(8) /* multiple chemistries supported */
#define BQ27XXX_DATA(ref, key, opt) { \
.opts = (opt), \
@@ -903,6 +946,8 @@ static struct {
[BQ27621] = BQ27XXX_DATA(bq27621, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
[BQ27Z561] = BQ27XXX_DATA(bq27z561, 0 , BQ27Z561_O_BITS),
[BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS),
+ [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+ BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
};
static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -1914,7 +1959,10 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
ret = bq27xxx_simple_value(di->cache.time_to_full, val);
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ if (di->opts & BQ27XXX_O_MUL_CHEM)
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ else
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 765873dfc495..eb4f4284982f 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -247,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27621", BQ27621 },
{ "bq27z561", BQ27Z561 },
{ "bq28z610", BQ28Z610 },
+ { "bq34z100", BQ34Z100 },
{},
};
MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -282,6 +283,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
{ .compatible = "ti,bq27621" },
{ .compatible = "ti,bq27z561" },
{ .compatible = "ti,bq28z610" },
+ { .compatible = "ti,bq34z100" },
{},
};
MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 987d9652aa4e..111a40d0d3d5 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -32,6 +32,7 @@ enum bq27xxx_chip {
BQ27621,
BQ27Z561,
BQ28Z610,
+ BQ34Z100,
};
struct bq27xxx_device_info;
--
2.17.1
next prev parent reply other threads:[~2020-09-08 20:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 20:13 [PATCH 1/7] dt-bindings: power: bq27xxx: add bq34z100 Krzysztof Kozlowski
2020-09-08 20:13 ` [PATCH 2/7] power: supply: bq27xxx: report "not charging" on all types Krzysztof Kozlowski
2020-09-08 20:54 ` Dan Murphy
2020-09-09 6:35 ` Krzysztof Kozlowski
2020-09-08 20:13 ` [PATCH 3/7] power: supply: bq27xxx: adjust whitespace Krzysztof Kozlowski
2020-09-08 20:13 ` [PATCH 4/7] power: supply: bq27xxx: use BIT() for bit flags Krzysztof Kozlowski
2020-09-08 20:53 ` Dan Murphy
2020-09-09 6:38 ` Krzysztof Kozlowski
2020-09-08 20:13 ` [PATCH 5/7] power: supply: bq27xxx: add separate flag for single SoC register Krzysztof Kozlowski
2020-09-08 20:13 ` [PATCH 6/7] power: supply: bq27xxx: add separate flag for capacity inaccurate Krzysztof Kozlowski
2020-09-08 20:13 ` Krzysztof Kozlowski [this message]
2020-09-15 17:12 ` [PATCH 1/7] dt-bindings: power: bq27xxx: add bq34z100 Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200908201319.3567-7-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.