Re: [PATCH net-next + leds v2 1/7] dt-bindings: leds: document binding for HW controlled LEDs

[Rob Herring <robh@kernel.org>]

On Wed, Sep 09, 2020 at 06:25:46PM +0200, Marek Behún wrote:
> Document binding for LEDs connected to and controlled by various chips
> (such as ethernet PHY chips).

If they are h/w controlled, then why are they in DT?

> 
> Signed-off-by: Marek Behún <marek.behun@nic.cz>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> ---
>  .../leds/linux,hw-controlled-leds.yaml        | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml b/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml
> new file mode 100644
> index 0000000000000..eaf6e5d80c5f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/linux,hw-controlled-leds.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/linux,hw-controlled-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LEDs that can be controlled by hardware (eg. by an ethernet PHY chip)
> +
> +maintainers:
> +  - Marek Behún <marek.behun@nic.cz>
> +
> +description:
> +  Many an ethernet PHY (and other chips) supports various HW control modes
> +  for LEDs connected directly to them. With this binding such LEDs can be
> +  described.
> +
> +properties:
> +  compatible:
> +    const: linux,hw-controlled-leds

What makes this linux specific?

Unless you're going to make this h/w specific, then it probably should 
just be dropped. 

The phy schema will need:

leds:
  type: object
  $ref: /schemas/leds/hw-controlled-leds.yaml#

> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +patternProperties:
> +  "^led@[0-9a-f]+$":
> +    type: object
> +    allOf:
> +      - $ref: common.yaml#
> +    description:
> +      This node represents a LED device connected to a chip that can control
> +      the LED in various HW controlled modes.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +        description:
> +          This property identifies the LED to the chip the LED is connected to
> +          (eg. an ethernet PHY chip can have multiple LEDs connected to it).
> +
> +      enable-active-high:
> +        description:
> +          Polarity of LED is active high. If missing, assumed default is active
> +          low.
> +        type: boolean
> +
> +      led-tristate:
> +        description:
> +          LED pin is tristate type. If missing, assumed false.
> +        type: boolean
> +
> +      linux,default-hw-mode:

How is this linux specific? It sounds device specific. Your choice is 
make this a device specific property with device specific values or come 
up with generic modes.

Perhaps 'function' should be expanded.

> +        description:
> +          This parameter, if present, specifies the default HW triggering mode
> +          of the LED when LED trigger is set to `dev-hw-mode`.
> +          Available values are specific per device the LED is connected to and
> +          per LED itself.
> +        $ref: /schemas/types.yaml#definitions/string
> +
> +    required:
> +      - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/leds/common.h>
> +
> +    ethernet-phy@0 {
> +        compatible = "ethernet-phy-ieee802.3-c45";
> +        reg = <0>;
> +
> +        leds {
> +            compatible = "linux,hw-controlled-leds";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            led@0 {
> +                reg = <0>;
> +                color = <LED_COLOR_ID_GREEN>;
> +                function = <LED_FUNCTION_STATUS>;

Reading the description of LED_FUNCTION_STATUS doesn't align with how 
you are using it. Think of it as user alert/notification.

> +                linux,default-trigger = "dev-hw-mode";

This is deprecated in favor of 'function'.

> +                linux,default-hw-mode = "1Gbps";
> +            };
> +
> +            led@1 {
> +                reg = <1>;
> +                color = <LED_COLOR_ID_YELLOW>;
> +                function = <LED_FUNCTION_ACTIVITY>;
> +                linux,default-trigger = "dev-hw-mode";
> +                linux,default-hw-mode = "activity";
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.26.2
>