From: Vinod Koul <vkoul@kernel.org>
To: alsa-devel@alsa-project.org
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Sanyog Kale <sanyog.r.kale@intel.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v2 2/2] soundwire: intel: use {u32|u16}p_replace_bits
Date: Thu, 17 Sep 2020 17:31:46 +0530 [thread overview]
Message-ID: <20200917120146.1780323-3-vkoul@kernel.org> (raw)
In-Reply-To: <20200917120146.1780323-1-vkoul@kernel.org>
FIELD_PREP() does not replace the bits so it is not apt in case where we
modify a register.
Use u32_replace_bits() or u16_replace_bits() instead.
Fixes: 3b4979cabd4b ("soundwire: intel: use FIELD_{GET|PREP}")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/soundwire/intel.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index e047910d73f5..5a5a645bdb3f 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -329,7 +329,7 @@ static int intel_link_power_up(struct sdw_intel *sdw)
/* set SyncPRD period */
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
- sync_reg |= FIELD_PREP(SDW_SHIM_SYNC_SYNCPRD, syncprd);
+ u32p_replace_bits(&sync_reg, syncprd, SDW_SHIM_SYNC_SYNCPRD);
/* Set SyncCPU bit */
sync_reg |= SDW_SHIM_SYNC_SYNCCPU;
@@ -448,7 +448,7 @@ static int intel_shim_init(struct sdw_intel *sdw, bool clock_stop)
intel_shim_glue_to_master_ip(sdw);
- act |= FIELD_PREP(SDW_SHIM_CTMCTL_DOAIS, 0x1);
+ u16p_replace_bits(&act, 0x1, SDW_SHIM_CTMCTL_DOAIS);
act |= SDW_SHIM_CTMCTL_DACTQE;
act |= SDW_SHIM_CTMCTL_DODS;
intel_writew(shim, SDW_SHIM_CTMCTL(link_id), act);
@@ -712,9 +712,9 @@ intel_pdi_shim_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
else
pdi_conf &= ~(SDW_SHIM_PCMSYCM_DIR);
- pdi_conf |= FIELD_PREP(SDW_SHIM_PCMSYCM_STREAM, pdi->intel_alh_id);
- pdi_conf |= FIELD_PREP(SDW_SHIM_PCMSYCM_LCHN, pdi->l_ch_num);
- pdi_conf |= FIELD_PREP(SDW_SHIM_PCMSYCM_HCHN, pdi->h_ch_num);
+ u32p_replace_bits(&pdi_conf, pdi->intel_alh_id, SDW_SHIM_PCMSYCM_STREAM);
+ u32p_replace_bits(&pdi_conf, pdi->l_ch_num, SDW_SHIM_PCMSYCM_LCHN);
+ u32p_replace_bits(&pdi_conf, pdi->h_ch_num, SDW_SHIM_PCMSYCM_HCHN);
intel_writew(shim, SDW_SHIM_PCMSYCHM(link_id, pdi->num), pdi_conf);
}
@@ -734,8 +734,8 @@ intel_pdi_alh_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
/* Program Stream config ALH register */
conf = intel_readl(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id));
- conf |= FIELD_PREP(SDW_ALH_STRMZCFG_DMAT, SDW_ALH_STRMZCFG_DMAT_VAL);
- conf |= FIELD_PREP(SDW_ALH_STRMZCFG_CHN, pdi->ch_count - 1);
+ u32p_replace_bits(&conf, SDW_ALH_STRMZCFG_DMAT_VAL, SDW_ALH_STRMZCFG_DMAT);
+ u32p_replace_bits(&conf, pdi->ch_count - 1, SDW_ALH_STRMZCFG_CHN);
intel_writel(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id), conf);
}
--
2.26.2
prev parent reply other threads:[~2020-09-17 12:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 12:01 [PATCH v2 0/2] soundwire: use {u32|u16}p_replace_bits Vinod Koul
2020-09-17 12:01 ` [PATCH v2 1/2] soundwire: cadence: use u32p_replace_bits Vinod Koul
2020-09-17 12:01 ` Vinod Koul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200917120146.1780323-3-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.