From: Johan Hovold <johan@kernel.org>
To: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org,
Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>,
Johan Hovold <johan@kernel.org>
Subject: [RFC 4/4] USB: cdc-acm: clean up handling of quirky devices
Date: Mon, 21 Sep 2020 13:35:25 +0200 [thread overview]
Message-ID: <20200921113525.32187-5-johan@kernel.org> (raw)
In-Reply-To: <20200921113525.32187-1-johan@kernel.org>
Instead of falling back to "combined-interface" probing when detecting
broken union and call-management descriptors, assume all interfaces with
three endpoints are of "combined-interface" type.
This allows for the removal of the NO_DATA_INTERFACE quirk and makes the
probe algorithm somewhat easier to follow.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/class/cdc-acm.c | 44 ++++++++++---------------------------
drivers/usb/class/cdc-acm.h | 11 +++++-----
2 files changed, 16 insertions(+), 39 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2758e295871e..eda883ce6d9d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1217,44 +1217,27 @@ static int acm_probe(struct usb_interface *intf,
if (cmgmd)
call_intf_num = cmgmd->bDataInterface;
+ if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
+ dev_dbg(&intf->dev, "assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
+
if (!union_header) {
if (call_intf_num > 0) {
dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
- /* quirks for Droids MuIn LCD */
- if (quirks & NO_DATA_INTERFACE) {
- data_interface = usb_ifnum_to_if(usb_dev, 0);
- } else {
- data_intf_num = call_intf_num;
- data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
- }
+ data_intf_num = call_intf_num;
+ data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
control_interface = intf;
} else {
- if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
- return -ENODEV;
- } else {
- dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
- combined_interfaces = 1;
- control_interface = data_interface = intf;
- goto look_for_collapsed_interface;
- }
+ dev_dbg(&intf->dev, "No union descriptor, giving up\n");
+ return -ENODEV;
}
} else {
- int class = -1;
-
data_intf_num = union_header->bSlaveInterface0;
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
-
- if (control_interface)
- class = control_interface->cur_altsetting->desc.bInterfaceClass;
-
- if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
- dev_warn(&intf->dev, "Broken union descriptor, assuming single interface\n");
- combined_interfaces = 1;
- control_interface = data_interface = intf;
- goto look_for_collapsed_interface;
- }
}
if (!control_interface || !data_interface) {
@@ -1881,11 +1864,6 @@ static const struct usb_device_id acm_ids[] = {
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
- /* Support for Droids MuIn LCD */
- { USB_DEVICE(0x04d8, 0x000b),
- .driver_info = NO_DATA_INTERFACE,
- },
-
#if IS_ENABLED(CONFIG_INPUT_IMS_PCU)
{ USB_DEVICE(0x04d8, 0x0082), /* Application mode */
.driver_info = IGNORE_DEVICE,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index b7174a0098a5..b2135095898f 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -135,9 +135,8 @@ struct acm {
#define NO_UNION_NORMAL BIT(0)
#define SINGLE_RX_URB BIT(1)
#define NO_CAP_LINE BIT(2)
-#define NO_DATA_INTERFACE BIT(4)
-#define IGNORE_DEVICE BIT(5)
-#define QUIRK_CONTROL_LINE_STATE BIT(6)
-#define CLEAR_HALT_CONDITIONS BIT(7)
-#define SEND_ZERO_PACKET BIT(8)
-#define DISABLE_ECHO BIT(9)
+#define IGNORE_DEVICE BIT(3)
+#define QUIRK_CONTROL_LINE_STATE BIT(4)
+#define CLEAR_HALT_CONDITIONS BIT(5)
+#define SEND_ZERO_PACKET BIT(6)
+#define DISABLE_ECHO BIT(7)
--
2.26.2
next prev parent reply other threads:[~2020-09-21 11:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-21 11:35 [PATCH 0/4] USB: cdc-acm: handle broken union descriptors Johan Hovold
2020-09-21 11:35 ` [PATCH 1/4] Revert "cdc-acm: hardening against malicious devices" Johan Hovold
2020-09-21 11:35 ` [PATCH 2/4] USB: cdc-acm: handle broken union descriptors Johan Hovold
2020-09-21 11:35 ` [PATCH 3/4] USB: cdc-acm: use common data-class define Johan Hovold
2020-09-21 11:35 ` Johan Hovold [this message]
2020-09-21 11:53 ` [RFC 4/4] USB: cdc-acm: clean up handling of quirky devices Oliver Neukum
2020-09-21 12:15 ` Johan Hovold
2020-09-21 12:45 ` Oliver Neukum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200921113525.32187-5-johan@kernel.org \
--to=johan@kernel.org \
--cc=f1rmb.daniel@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.