Re: linux-next: manual merge of the pci tree with the imx-mxs tree

[Shawn Guo <shawnguo@kernel.org>]

On Thu, Sep 24, 2020 at 11:57:31AM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the pci tree got a conflict in:
> 
>   arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> 
> between commit:
> 
>   f7d48ffcfc6e ("arm64: dts: layerscape: Add label to pcie nodes")
> 
> from the imx-mxs tree and commit:
> 
>   c9443b6500ff ("arm64: dts: layerscape: Add PCIe EP node for ls1088a")
> 
> from the pci tree.

It should go through imx-mxs -> arm-soc, not pci tree.

Shawn

> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index ff5805206a28,f21dd143ab6d..000000000000
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@@ -517,7 -499,18 +517,18 @@@
>   			status = "disabled";
>   		};
>   
> + 		pcie-ep@3400000 {
> + 			compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> + 			reg = <0x00 0x03400000 0x0 0x00100000
> + 			       0x20 0x00000000 0x8 0x00000000>;
> + 			reg-names = "regs", "addr_space";
> + 			num-ib-windows = <24>;
> + 			num-ob-windows = <128>;
> + 			max-functions = /bits/ 8 <2>;
> + 			status = "disabled";
> + 		};
> + 
>  -		pcie@3500000 {
>  +		pcie2: pcie@3500000 {
>   			compatible = "fsl,ls1088a-pcie";
>   			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
>   			       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
> @@@ -543,7 -536,17 +554,17 @@@
>   			status = "disabled";
>   		};
>   
> + 		pcie-ep@3500000 {
> + 			compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> + 			reg = <0x00 0x03500000 0x0 0x00100000
> + 			       0x28 0x00000000 0x8 0x00000000>;
> + 			reg-names = "regs", "addr_space";
> + 			num-ib-windows = <6>;
> + 			num-ob-windows = <8>;
> + 			status = "disabled";
> + 		};
> + 
>  -		pcie@3600000 {
>  +		pcie3: pcie@3600000 {
>   			compatible = "fsl,ls1088a-pcie";
>   			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
>   			       0x30 0x00000000 0x0 0x00002000>; /* configuration space */