From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, zhengchuan@huawei.com,
dovmurik@linux.vnet.ibm.com, hgcoin@gmail.com,
zhangjiachen.jaycee@bytedance.com, lvivier@redhat.com,
peterx@redhat.com, stefanha@redhat.com, vgoyal@redhat.com,
jinyan12@huawei.com, ann.zhuangyanying@huawei.com
Cc: quintela@redhat.com
Subject: [PULL 02/26] migration: Rework migrate_send_rp_req_pages() function
Date: Fri, 25 Sep 2020 13:06:31 +0100 [thread overview]
Message-ID: <20200925120655.295142-3-dgilbert@redhat.com> (raw)
In-Reply-To: <20200925120655.295142-1-dgilbert@redhat.com>
From: Peter Xu <peterx@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
migration/migration.c | 26 ++++++++++++++++++--------
migration/migration.h | 4 ++--
migration/postcopy-ram.c | 24 ++----------------------
3 files changed, 22 insertions(+), 32 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 3495c9e542..827f8be07d 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -314,25 +314,35 @@ error:
return ret;
}
-/* Request a range of pages from the source VM at the given
- * start address.
- * rbname: Name of the RAMBlock to request the page in, if NULL it's the same
- * as the last request (a name must have been given previously)
+/* Request one page from the source VM at the given start address.
+ * rb: the RAMBlock to request the page in
* Start: Address offset within the RB
* Len: Length in bytes required - must be a multiple of pagesize
*/
-int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char *rbname,
- ram_addr_t start, size_t len)
+int migrate_send_rp_req_pages(MigrationIncomingState *mis, RAMBlock *rb,
+ ram_addr_t start)
{
uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
size_t msglen = 12; /* start + len */
+ size_t len = qemu_ram_pagesize(rb);
enum mig_rp_message_type msg_type;
+ const char *rbname;
+ int rbname_len;
*(uint64_t *)bufc = cpu_to_be64((uint64_t)start);
*(uint32_t *)(bufc + 8) = cpu_to_be32((uint32_t)len);
- if (rbname) {
- int rbname_len = strlen(rbname);
+ /*
+ * We maintain the last ramblock that we requested for page. Note that we
+ * don't need locking because this function will only be called within the
+ * postcopy ram fault thread.
+ */
+ if (rb != mis->last_rb) {
+ mis->last_rb = rb;
+
+ rbname = qemu_ram_get_idstr(rb);
+ rbname_len = strlen(rbname);
+
assert(rbname_len < 256);
bufc[msglen++] = rbname_len;
diff --git a/migration/migration.h b/migration/migration.h
index bdc7450da3..e74042362d 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -326,8 +326,8 @@ void migrate_send_rp_shut(MigrationIncomingState *mis,
uint32_t value);
void migrate_send_rp_pong(MigrationIncomingState *mis,
uint32_t value);
-int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
- ram_addr_t start, size_t len);
+int migrate_send_rp_req_pages(MigrationIncomingState *mis, RAMBlock *rb,
+ ram_addr_t start);
void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
char *block_name);
void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 1654ff11a5..0a2f88a87d 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -684,14 +684,7 @@ int postcopy_request_shared_page(struct PostCopyFD *pcfd, RAMBlock *rb,
qemu_ram_get_idstr(rb), rb_offset);
return postcopy_wake_shared(pcfd, client_addr, rb);
}
- if (rb != mis->last_rb) {
- mis->last_rb = rb;
- migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
- aligned_rbo, pagesize);
- } else {
- /* Save some space */
- migrate_send_rp_req_pages(mis, NULL, aligned_rbo, pagesize);
- }
+ migrate_send_rp_req_pages(mis, rb, aligned_rbo);
return 0;
}
@@ -986,20 +979,7 @@ retry:
* Send the request to the source - we want to request one
* of our host page sizes (which is >= TPS)
*/
- if (rb != mis->last_rb) {
- mis->last_rb = rb;
- ret = migrate_send_rp_req_pages(mis,
- qemu_ram_get_idstr(rb),
- rb_offset,
- qemu_ram_pagesize(rb));
- } else {
- /* Save some space */
- ret = migrate_send_rp_req_pages(mis,
- NULL,
- rb_offset,
- qemu_ram_pagesize(rb));
- }
-
+ ret = migrate_send_rp_req_pages(mis, rb, rb_offset);
if (ret) {
/* May be network failure, try to wait for recovery */
if (ret == -EIO && postcopy_pause_fault_thread(mis)) {
--
2.26.2
next prev parent reply other threads:[~2020-09-25 12:10 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-25 12:06 [PULL 00/26] migration and friends queue Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 01/26] migration: Properly destroy variables on incoming side Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` Dr. David Alan Gilbert (git) [this message]
2020-09-25 12:06 ` [PULL 03/26] migration/dirtyrate: setup up query-dirtyrate framwork Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 04/26] migration/dirtyrate: add DirtyRateStatus to denote calculation status Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 05/26] migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 06/26] migration/dirtyrate: Add dirtyrate statistics series functions Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 07/26] migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 08/26] migration/dirtyrate: Record hash results for each sampled page Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 09/26] migration/dirtyrate: Compare page hash results for recorded " Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 10/26] migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 11/26] migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid() Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 12/26] migration/dirtyrate: Implement calculate_dirtyrate() function Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 13/26] migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 14/26] migration/dirtyrate: Add trace_calls to make it easier to debug Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 15/26] migration: Truncate state file in xen-save-devices-state Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 16/26] migration: increase max-bandwidth to 128 MiB/s (1 Gib/s) Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 17/26] migration/tls: save hostname into MigrationState Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 18/26] migration/tls: extract migration_tls_client_create for common-use Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 19/26] migration/tls: add tls_hostname into MultiFDSendParams Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 20/26] migration/tls: extract cleanup function for common-use Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 21/26] migration/tls: add support for multifd tls-handshake Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 22/26] migration/tls: add trace points for multifd-tls Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 23/26] monitor: Use LOCK_GUARD macros Dr. David Alan Gilbert (git)
2023-02-07 13:26 ` Marc-André Lureau
2023-02-07 13:41 ` Dr. David Alan Gilbert
2023-02-07 14:06 ` Marc-André Lureau
2020-09-25 12:06 ` [PULL 24/26] virtiofsd: document cache=auto default Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 25/26] virtiofsd: Used glib "shared" thread pool Dr. David Alan Gilbert (git)
2020-09-25 12:06 ` [PULL 26/26] virtiofsd: Add -o allow_direct_io|no_allow_direct_io options Dr. David Alan Gilbert (git)
2020-09-29 21:53 ` Vivek Goyal
2020-09-30 2:14 ` [External] " Jiachen Zhang
2020-09-25 12:35 ` [PULL 00/26] migration and friends queue no-reply
2020-09-25 14:31 ` Dr. David Alan Gilbert
2020-09-25 16:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200925120655.295142-3-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=ann.zhuangyanying@huawei.com \
--cc=dovmurik@linux.vnet.ibm.com \
--cc=hgcoin@gmail.com \
--cc=jinyan12@huawei.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
--cc=vgoyal@redhat.com \
--cc=zhangjiachen.jaycee@bytedance.com \
--cc=zhengchuan@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.