Re: [PATCH v10 7/7] Versal: Connect DWC3 controller with virt-versal

["Edgar E. Iglesias" <edgar.iglesias@xilinx.com>]

On Thu, Sep 24, 2020 at 07:50:56PM +0530, Sai Pavan Boddu wrote:
> From: Vikram Garhwal <fnu.vikram@xilinx.com>
> 
> Connect dwc3 controller and usb2-reg module to xlnx-versal SOC, its placed
> in iou of lpd domain and configure it as dual port host controller. Add the
> respective guest dts nodes for "xlnx-versal-virt" machine.

Hi Sai,

One minor comment inline.

And a question, could you please post an example command-line for this?


> 
> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> ---
>  hw/arm/xlnx-versal-virt.c    | 58 ++++++++++++++++++++++++++++++++++++++++++++
>  hw/arm/xlnx-versal.c         | 34 ++++++++++++++++++++++++++
>  include/hw/arm/xlnx-versal.h | 14 +++++++++++
>  3 files changed, 106 insertions(+)
> 
> diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
> index 03e2320..f0ac5ba 100644
> --- a/hw/arm/xlnx-versal-virt.c
> +++ b/hw/arm/xlnx-versal-virt.c
> @@ -39,6 +39,8 @@ struct VersalVirt {
>          uint32_t ethernet_phy[2];
>          uint32_t clk_125Mhz;
>          uint32_t clk_25Mhz;
> +        uint32_t usb;
> +        uint32_t dwc;
>      } phandle;
>      struct arm_boot_info binfo;
>  
> @@ -66,6 +68,8 @@ static void fdt_create(VersalVirt *s)
>      s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt);
>      s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt);
>  
> +    s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt);
> +    s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt);
>      /* Create /chosen node for load_dtb.  */
>      qemu_fdt_add_subnode(s->fdt, "/chosen");
>  
> @@ -148,6 +152,59 @@ static void fdt_add_timer_nodes(VersalVirt *s)
>                       compat, sizeof(compat));
>  }
>  
> +static void fdt_add_usb_xhci_nodes(VersalVirt *s)
> +{
> +    const char clocknames[] = "bus_clk\0ref_clk";
> +    char *name = g_strdup_printf("/usb@%" PRIx32, MM_USB2_CTRL_REGS);
> +    const char compat[] = "xlnx,versal-dwc3";
> +
> +    qemu_fdt_add_subnode(s->fdt, name);
> +    qemu_fdt_setprop(s->fdt, name, "compatible",
> +                         compat, sizeof(compat));
> +    qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> +                                 2, MM_USB2_CTRL_REGS,
> +                                 2, MM_USB2_CTRL_REGS_SIZE);
> +    qemu_fdt_setprop(s->fdt, name, "clock-names",
> +                         clocknames, sizeof(clocknames));
> +    qemu_fdt_setprop_cells(s->fdt, name, "clocks",
> +                               s->phandle.clk_25Mhz, s->phandle.clk_125Mhz);
> +    qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0);
> +    qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2);
> +    qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2);
> +    qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb);
> +    g_free(name);
> +
> +    {
> +        const char irq_name[] = "dwc_usb3";
> +        const char compat[] = "snps,dwc3";
> +
> +        name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32,
> +                               MM_USB2_CTRL_REGS, MM_USB_XHCI_0);
> +        qemu_fdt_add_subnode(s->fdt, name);
> +        qemu_fdt_setprop(s->fdt, name, "compatible",
> +                         compat, sizeof(compat));
> +        qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> +                                     2, MM_USB_XHCI_0, 2, MM_USB_XHCI_0_SIZE);
> +        qemu_fdt_setprop(s->fdt, name, "interrupt-names",
> +                         irq_name, sizeof(irq_name));
> +        qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
> +                                   GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0,
> +                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> +        qemu_fdt_setprop_cell(s->fdt, name,
> +                              "snps,quirk-frame-length-adjustment", 0x20);
> +        qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1);
> +        qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host");
> +        qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy");
> +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0);
> +        qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc);
> +        qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-speed");
> +        g_free(name);
> +    }
> +}
> +
>  static void fdt_add_uart_nodes(VersalVirt *s)
>  {
>      uint64_t addrs[] = { MM_UART1, MM_UART0 };
> @@ -515,6 +572,7 @@ static void versal_virt_init(MachineState *machine)
>      fdt_add_gic_nodes(s);
>      fdt_add_timer_nodes(s);
>      fdt_add_zdma_nodes(s);
> +    fdt_add_usb_xhci_nodes(s);
>      fdt_add_sd_nodes(s);
>      fdt_add_rtc_node(s);
>      fdt_add_cpu_nodes(s, psci_conduit);
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index 12ba6c4..64b0d0a 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -145,6 +145,39 @@ static void versal_create_uarts(Versal *s, qemu_irq *pic)
>      }
>  }
>  
> +static void versal_create_usbs(Versal *s, qemu_irq *pic)
> +{
> +    DeviceState *dev, *xhci_dev;
> +    MemoryRegion *mr;
> +
> +    object_initialize_child(OBJECT(s), "dwc3-0", &s->lpd.iou.usb.dwc3,
> +                            TYPE_USB_DWC3);
> +    dev = DEVICE(&s->lpd.iou.usb.dwc3);
> +    xhci_dev = DEVICE(&s->lpd.iou.usb.dwc3.sysbus_xhci);
> +
> +    object_property_set_link(OBJECT(xhci_dev), "dma", OBJECT(&s->mr_ps),
> +                             &error_abort);
> +    qdev_prop_set_uint32(xhci_dev, "intrs", 1);
> +    qdev_prop_set_uint32(xhci_dev, "slots", 2);
> +
> +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0_DWC3_GLOBAL, mr);
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(xhci_dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0, mr);
> +
> +    sysbus_connect_irq(SYS_BUS_DEVICE(xhci_dev), 0, pic[VERSAL_USB0_IRQ_0]);
> +
> +    object_initialize_child(OBJECT(s), "usb2reg-0", &s->lpd.iou.usb.Usb2Regs,
> +                           TYPE_XILINX_VERSAL_USB2_CTRL_REGS);
> +    dev = DEVICE(&s->lpd.iou.usb.Usb2Regs);
> +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS, mr);
> +}
> +
>  static void versal_create_gems(Versal *s, qemu_irq *pic)
>  {
>      int i;
> @@ -333,6 +366,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
>      versal_create_apu_cpus(s);
>      versal_create_apu_gic(s, pic);
>      versal_create_uarts(s, pic);
> +    versal_create_usbs(s, pic);
>      versal_create_gems(s, pic);
>      versal_create_admas(s, pic);
>      versal_create_sds(s, pic);
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index 8ce8e63..743e4f7 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -21,6 +21,8 @@
>  #include "hw/net/cadence_gem.h"
>  #include "hw/rtc/xlnx-zynqmp-rtc.h"
>  #include "qom/object.h"
> +#include "hw/usb/hcd-dwc3.h"
> +#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
>  
>  #define TYPE_XLNX_VERSAL "xlnx-versal"
>  OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
> @@ -59,6 +61,10 @@ struct Versal {
>              PL011State uart[XLNX_VERSAL_NR_UARTS];
>              CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
>              XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
> +            struct {
> +                USBDWC3 dwc3;
> +                VersalUsb2CtrlRegs Usb2Regs;

I'd prefer this to be any of the following:

                   VersalUsb2CtrlRegs ctrl;
                   VersalUsb2CtrlRegs regs;
                   VersalUsb2CtrlRegs ctrl_regs;