From: Michael Walle <michael@walle.cc>
To: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Vladimir Oltean <olteanv@gmail.com>,
Mark Brown <broonie@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Michael Walle <michael@walle.cc>
Subject: [PATCH] spi: fsl-dspi: fix NULL pointer dereference
Date: Mon, 28 Sep 2020 00:43:36 +0200 [thread overview]
Message-ID: <20200927224336.705-1-michael@walle.cc> (raw)
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove
path") this driver causes a kernel oops:
[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080
[ 1.899889] Mem abort info:
[ 1.902692] ESR = 0x96000004
[ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.911089] SET = 0, FnV = 0
[ 1.914156] EA = 0, S1PTW = 0
[ 1.917303] Data abort info:
[ 1.920193] ISV = 0, ISS = 0x00000004
[ 1.924044] CM = 0, WnR = 0
[ 1.927022] [0000000000000080] user address but active_mm is swapper
[ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 1.938995] Modules linked in:
[ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94
[ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 1.966168] pc : dspi_setup+0xc8/0x2e0
[ 1.969926] lr : dspi_setup+0xbc/0x2e0
[ 1.973684] sp : ffff80001139b930
[ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000
[ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410
[ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400
[ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948
[ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800
[ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010
[ 2.008994] x17: 0000000000000001 x16: 0000000000000019
[ 2.014326] x15: ffffffffffffffff x14: 0720072007200720
[ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0
[ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0
[ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780
[ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f
[ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918
[ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100
[ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000
[ 2.056973] Call trace:
[ 2.059425] dspi_setup+0xc8/0x2e0
[ 2.062837] spi_setup+0xcc/0x248
[ 2.066160] spi_add_device+0xb4/0x198
[ 2.069918] of_register_spi_device+0x250/0x370
[ 2.074462] spi_register_controller+0x4f4/0x770
[ 2.079094] dspi_probe+0x5bc/0x7b0
[ 2.082594] platform_drv_probe+0x5c/0xb0
[ 2.086615] really_probe+0xec/0x3c0
[ 2.090200] driver_probe_device+0x60/0xc0
[ 2.094308] device_driver_attach+0x7c/0x88
[ 2.098503] __driver_attach+0x60/0xe8
[ 2.102263] bus_for_each_dev+0x7c/0xd0
[ 2.106109] driver_attach+0x2c/0x38
[ 2.109692] bus_add_driver+0x194/0x1f8
[ 2.113538] driver_register+0x6c/0x128
[ 2.117385] __platform_driver_register+0x50/0x60
[ 2.122105] fsl_dspi_driver_init+0x24/0x30
[ 2.126302] do_one_initcall+0x54/0x2d0
[ 2.130149] kernel_init_freeable+0x1ec/0x258
[ 2.134520] kernel_init+0x1c/0x120
[ 2.138018] ret_from_fork+0x10/0x34
[ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000)
[ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]---
[ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2.160061] SMP: stopping secondary CPUs
[ 2.163999] Kernel Offset: disabled
[ 2.167496] CPU features: 0x0040022,20006008
[ 2.171777] Memory Limit: none
[ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
This is because since this commit, the allocation of the drivers private
data is done explicitly and in this case spi_alloc_master() won't set the
correct pointer.
Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/spi/spi-fsl-dspi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index a939618f5e47..dd80be987bf9 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)
if (!ctlr)
return -ENOMEM;
+ spi_controller_set_devdata(ctlr, dspi);
+
dspi->pdev = pdev;
dspi->ctlr = ctlr;
--
2.20.1
next reply other threads:[~2020-09-27 22:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-27 22:43 Michael Walle [this message]
2020-09-27 23:27 ` [PATCH] spi: fsl-dspi: fix NULL pointer dereference Vladimir Oltean
2020-09-28 7:29 ` Krzysztof Kozlowski
2020-09-28 7:36 ` Krzysztof Kozlowski
2020-09-28 7:46 ` Michael Walle
2020-09-28 8:12 ` Krzysztof Kozlowski
2020-09-28 8:04 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2020-10-29 8:40 Qiang Zhao
2020-10-29 11:03 ` Vladimir Oltean
2020-10-30 2:04 ` Qiang Zhao
2020-10-30 13:14 ` Vladimir Oltean
2020-10-30 13:02 ` Mark Brown
2020-11-02 2:01 ` Qiang Zhao
2020-10-30 13:18 ` Vladimir Oltean
2020-11-02 2:19 ` Qiang Zhao
2020-11-02 11:17 ` Vladimir Oltean
2020-11-04 20:43 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200927224336.705-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.