From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Eddie James <eajames@linux.ibm.com>
Subject: [PATCH linux dev-5.8] fsi: Aspeed: Add mutex to protect HW access
Date: Tue, 29 Sep 2020 13:49:16 -0500 [thread overview]
Message-ID: <20200929184916.33247-1-eajames@linux.ibm.com> (raw)
There is nothing to prevent multiple commands being executed
simultaneously. Add a mutex to prevent this.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-master-aspeed.c | 48 ++++++++++++++++++++-------------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index c006ec008a1a..c71d7e9a32b0 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -8,6 +8,7 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -19,6 +20,7 @@
struct fsi_master_aspeed {
struct fsi_master master;
+ struct mutex lock; /* protect HW access */
struct device *dev;
void __iomem *base;
struct clk *clk;
@@ -254,6 +256,8 @@ static int aspeed_master_read(struct fsi_master *master, int link,
addr |= id << 21;
addr += link * FSI_HUB_LINK_SIZE;
+ mutex_lock(&aspeed->lock);
+
switch (size) {
case 1:
ret = opb_readb(aspeed, fsi_base + addr, val);
@@ -265,14 +269,14 @@ static int aspeed_master_read(struct fsi_master *master, int link,
ret = opb_readl(aspeed, fsi_base + addr, val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
ret = check_errors(aspeed, ret);
- if (ret)
- return ret;
-
- return 0;
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
}
static int aspeed_master_write(struct fsi_master *master, int link,
@@ -287,6 +291,8 @@ static int aspeed_master_write(struct fsi_master *master, int link,
addr |= id << 21;
addr += link * FSI_HUB_LINK_SIZE;
+ mutex_lock(&aspeed->lock);
+
switch (size) {
case 1:
ret = opb_writeb(aspeed, fsi_base + addr, *(u8 *)val);
@@ -298,14 +304,14 @@ static int aspeed_master_write(struct fsi_master *master, int link,
ret = opb_writel(aspeed, fsi_base + addr, *(__be32 *)val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
ret = check_errors(aspeed, ret);
- if (ret)
- return ret;
-
- return 0;
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
}
static int aspeed_master_link_enable(struct fsi_master *master, int link,
@@ -317,20 +323,23 @@ static int aspeed_master_link_enable(struct fsi_master *master, int link,
idx = link / 32;
bit = link % 32;
-
reg = cpu_to_be32(0x80000000 >> bit);
- if (!enable)
- return opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx),
- reg);
+ mutex_lock(&aspeed->lock);
- ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx), reg);
+ if (!enable)
+ ret = opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx),
+ reg);
+ else
+ ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx),
+ reg);
if (ret)
- return ret;
+ goto done;
mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
- return 0;
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
}
static int aspeed_master_term(struct fsi_master *master, int link, uint8_t id)
@@ -431,9 +440,11 @@ static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *att
{
struct fsi_master_aspeed *aspeed = dev_get_drvdata(dev);
+ mutex_lock(&aspeed->lock);
gpiod_set_value(aspeed->cfam_reset_gpio, 1);
usleep_range(900, 1000);
gpiod_set_value(aspeed->cfam_reset_gpio, 0);
+ mutex_unlock(&aspeed->lock);
return count;
}
@@ -597,6 +608,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, aspeed);
+ mutex_init(&aspeed->lock);
aspeed_master_init(aspeed);
rc = fsi_master_register(&aspeed->master);
--
2.26.2
next reply other threads:[~2020-09-29 18:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 18:49 Eddie James [this message]
2020-09-30 22:34 ` [PATCH linux dev-5.8] fsi: Aspeed: Add mutex to protect HW access Milton Miller II
2020-10-07 5:47 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200929184916.33247-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.