From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 4/5] drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock
Date: Thu, 1 Oct 2020 19:45:58 +0300 [thread overview]
Message-ID: <20201001164558.GW6112@intel.com> (raw)
In-Reply-To: <20200929002929.783620-5-imre.deak@intel.com>
On Tue, Sep 29, 2020 at 03:29:28AM +0300, Imre Deak wrote:
> Apply Display WA #22010492432 for combo PHY PLLs too. This should fix a
> problem where the PLL output frequency is slightly off with the current
> PLL fractional divider value.
>
> I haven't seen an actual case where this causes a problem, but let's
> follow the spec. It's also needed on some EHL platforms, but for that we
> also need a way to distinguish the affected EHL SKUs, so I leave that
> for a follow-up.
>
> v2:
> - Apply the WA at one place when calculating the PLL dividers from the
> frequency and the frequency from the dividers for all the combo PLL
> use cases (DP, HDMI, TBT). (Ville)
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 34 +++++++++++--------
> 1 file changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index ded2b2dfe319..e7b058340a1a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -2694,6 +2694,16 @@ static void cnl_wrpll_decode_divs(const struct skl_wrpll_params *wrpll_params,
> }
> }
>
> +/*
> + * Display WA #22010492432: tgl
> + * Program half of the nominal DCO divider fraction value.
> + */
> +static bool
> +tgl_combo_pll_div_frac_wa_needed(struct drm_i915_private *i915)
> +{
> + return IS_TIGERLAKE(i915) && i915->dpll.ref_clks.nssc == 38400;
> +}
> +
> static int __cnl_ddi_wrpll_get_freq(struct drm_i915_private *dev_priv,
> const struct intel_shared_dpll *pll,
> int ref_clock)
> @@ -2719,6 +2729,9 @@ static int __cnl_ddi_wrpll_get_freq(struct drm_i915_private *dev_priv,
> dco_fraction = (pll_state->cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >>
> DPLL_CFGCR0_DCO_FRACTION_SHIFT;
>
> + if (tgl_combo_pll_div_frac_wa_needed(dev_priv))
> + dco_fraction *= 2;
> +
> return skl_wrpll_calc_freq(ref_clock, dco_integer, dco_fraction, pdiv, qdiv, kdiv);
> }
>
> @@ -2992,16 +3005,6 @@ static const struct skl_wrpll_params tgl_tbt_pll_24MHz_values = {
> /* the following params are unused */
> };
>
> -/*
> - * Display WA #22010492432: tgl
> - * Divide the nominal .dco_fraction value by 2.
> - */
> -static const struct skl_wrpll_params tgl_tbt_pll_38_4MHz_values = {
> - .dco_integer = 0x54, .dco_fraction = 0x1800,
> - /* the following params are unused */
> - .pdiv = 0, .kdiv = 0, .qdiv_mode = 0, .qdiv_ratio = 0,
> -};
> -
> static int icl_wrpll_ref_clock(struct drm_i915_private *i915);
>
> static bool icl_dp_combo_pll_clock_match(struct drm_i915_private *i915, int clock,
> @@ -3059,14 +3062,12 @@ static bool icl_calc_tbt_pll(struct intel_crtc_state *crtc_state,
> MISSING_CASE(dev_priv->dpll.ref_clks.nssc);
> fallthrough;
> case 19200:
> + case 38400:
> *pll_params = tgl_tbt_pll_19_2MHz_values;
> break;
> case 24000:
> *pll_params = tgl_tbt_pll_24MHz_values;
> break;
> - case 38400:
> - *pll_params = tgl_tbt_pll_38_4MHz_values;
> - break;
> }
> } else {
> switch (dev_priv->dpll.ref_clks.nssc) {
> @@ -3133,9 +3134,14 @@ static void icl_calc_dpll_state(struct drm_i915_private *i915,
> const struct skl_wrpll_params *pll_params,
> struct intel_dpll_hw_state *pll_state)
> {
> + u32 dco_fraction = pll_params->dco_fraction;
> +
> memset(pll_state, 0, sizeof(*pll_state));
>
> - pll_state->cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(pll_params->dco_fraction) |
> + if (tgl_combo_pll_div_frac_wa_needed(i915))
> + dco_fraction = DIV_ROUND_CLOSEST(dco_fraction, 2);
> +
> + pll_state->cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(dco_fraction) |
> pll_params->dco_integer;
>
> pll_state->cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(pll_params->qdiv_ratio) |
> --
> 2.25.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-01 16:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 0:29 [Intel-gfx] [PATCH 0/5] drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock Imre Deak
2020-09-29 0:29 ` [Intel-gfx] [PATCH 1/5] drm/i915/skl: Work around incorrect BIOS WRPLL PDIV programming Imre Deak
2020-10-01 16:41 ` Ville Syrjälä
2020-10-01 16:53 ` Imre Deak
2020-09-29 0:29 ` [Intel-gfx] [PATCH 2/5] drm/i915: Factor out skl_wrpll_calc_freq() Imre Deak
2020-09-29 0:29 ` [Intel-gfx] [PATCH 3/5] drm/i915/icl: Cross check the combo PLL WRPLL parameters wrt. hard-coded PLL freqs Imre Deak
2020-10-01 16:44 ` Ville Syrjälä
2020-10-01 17:00 ` Ville Syrjälä
2020-10-01 17:31 ` Imre Deak
2020-09-29 0:29 ` [Intel-gfx] [PATCH 4/5] drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock Imre Deak
2020-10-01 16:45 ` Ville Syrjälä [this message]
2020-09-29 0:29 ` [Intel-gfx] [PATCH 5/5] drm/i915/tgl: Add workaround for incorrect BIOS combo PHY DPLL programming Imre Deak
2020-09-29 1:51 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock Patchwork
2020-09-29 2:11 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001164558.GW6112@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.