From: Vladimir Lypak <junak.pub@gmail.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Kathiravan T <kathirav@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Vladimir Lypak <junak.pub@gmail.com>
Subject: [PATCH 1/2] regulator: qcom_smd: add pm8953 regulators
Date: Sun, 4 Oct 2020 11:34:12 +0300 [thread overview]
Message-ID: <20201004083413.324351-1-junak.pub@gmail.com> (raw)
The PM8953 is commonly used on board with MSM8953 SoCs or its variants:
APQ8053, SDM(SDA)450 and SDM(SDA)632.
It provides 7 SMPS and 23 LDO regulators.
Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
---
drivers/regulator/qcom_smd-regulator.c | 54 ++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index faa99690b7b3..bb944ee5fe3b 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -403,6 +403,24 @@ static const struct regulator_desc pm8950_pldo = {
.ops = &rpm_smps_ldo_ops,
};
+static const struct regulator_desc pm8953_lnldo = {
+ .linear_ranges = (struct linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1380000, 8, 15, 120000),
+ REGULATOR_LINEAR_RANGE(690000, 0, 7, 60000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 16,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8953_ult_nldo = {
+ .linear_ranges = (struct linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 94,
+ .ops = &rpm_smps_ldo_ops,
+};
static const struct regulator_desc pm8994_hfsmps = {
.linear_ranges = (struct linear_range[]) {
@@ -854,6 +872,41 @@ static const struct rpm_regulator_data rpm_pm8950_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pm8953_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_hfsmps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_hfsmps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8998_hfsmps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8998_hfsmps, "vdd_s4" },
+ { "s5", QCOM_SMD_RPM_SMPA, 5, &pm8950_ftsmps2p5, "vdd_s5" },
+ { "s6", QCOM_SMD_RPM_SMPA, 6, &pm8950_ftsmps2p5, "vdd_s6" },
+ { "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_hfsmps, "vdd_s7" },
+
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8953_ult_nldo, "vdd_l1" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8953_ult_nldo, "vdd_l2_l3" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8953_ult_nldo, "vdd_l2_l3" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8950_ult_pldo, "vdd_l9_l10_l17_l18_l22" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8950_ult_pldo, "vdd_l9_l10_l17_l18_l22" },
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8950_ult_pldo, "vdd_l8_l11_l12_l13_l14_l15" },
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8950_ult_pldo, "vdd_l9_l10_l17_l18_l22" },
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8950_ult_pldo, "vdd_l9_l10_l17_l18_l22" },
+ { "l19", QCOM_SMD_RPM_LDOA, 19, &pm8953_ult_nldo, "vdd_l4_l5_l6_l7_l16_l19" },
+ { "l20", QCOM_SMD_RPM_LDOA, 20, &pm8953_lnldo, "vdd_l20" },
+ { "l21", QCOM_SMD_RPM_LDOA, 21, &pm8953_lnldo, "vdd_l21" },
+ { "l22", QCOM_SMD_RPM_LDOA, 22, &pm8950_ult_pldo, "vdd_l9_l10_l17_l18_l22" },
+ { "l23", QCOM_SMD_RPM_LDOA, 23, &pm8953_ult_nldo, "vdd_l23" },
+ {}
+};
+
static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8994_ftsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8994_ftsmps, "vdd_s2" },
@@ -1041,6 +1094,7 @@ static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
{ .compatible = "qcom,rpm-pm8950-regulators", .data = &rpm_pm8950_regulators },
+ { .compatible = "qcom,rpm-pm8953-regulators", .data = &rpm_pm8953_regulators },
{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
--
2.24.1
next reply other threads:[~2020-10-04 8:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-04 8:34 Vladimir Lypak [this message]
2020-10-04 8:34 ` [PATCH 2/2] dt-bindings: regulator: document pm8950 and pm8953 smd regulators Vladimir Lypak
2020-10-05 17:54 ` [PATCH 1/2] regulator: qcom_smd: add pm8953 regulators Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201004083413.324351-1-junak.pub@gmail.com \
--to=junak.pub@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kathirav@codeaurora.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.