Re: Use after free in bcm2835_spi_remove()

[Lukas Wunner <lukas@wunner.de>]

On Tue, Oct 13, 2020 at 04:48:42PM -0700, Florian Fainelli wrote:
> With KASAN now working on ARM 32-bit, I was able to get the following
> trace upon reboot which invokes bcm2835_spi_shutdown() calling
> bcm2835_spi_remove(), the same can be triggered by doing a driver unbind:

Thank you for the report.  Apparently the problem is that
spi_unregister_controller() drops the last ref on the controller,
causing it to be freed, and afterwards we access the controller's
private data, which is part of the same allocation as
struct spi_controller:

bcm2835_spi_remove()
  spi_unregister_controller()
    device_unregister()
      put_device()
        spi_controller_release()  #  spi_master_class.dev_release()
	  kfree(ctlr)
  bcm2835_dma_release(ctlr, bs)
  ...

However, when I submitted commit 9dd277ff92d0, I double-checked that
the kfree() happens after bcm2835_spi_remove() has finished and I
even wrote in the commit message:

   "Note that
    the struct spi_controller as well as the driver-private data are not
    freed until after bcm2835_spi_remove() has finished, so accessing them
    is safe."

I'm puzzled now that it doesn't work as intended.  I do not see any
recent commits which changed the behavior, so I must have made a
mistake and missed something.

The below patch should fix the issue.  Could you verify that?
Unfortunately I do not have access to a RasPi currently.

An alternative to this patch would be a devm function which acquires
a ref on the spi controller on ->probe() and automatically releases it
after ->remove() has finished.  This could be used by other SPI drivers
as well.

Thanks,

Lukas

-- >8 --

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 41986ac..5254fda 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1377,6 +1377,7 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
 
 	bcm2835_debugfs_remove(bs);
 
+	spi_controller_get(ctlr);
 	spi_unregister_controller(ctlr);
 
 	bcm2835_dma_release(ctlr, bs);
@@ -1386,6 +1387,7 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 
 	clk_disable_unprepare(bs->clk);
+	spi_controller_put(ctlr);
 
 	return 0;
 }