From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: "open list:KERNEL SELFTEST FRAMEWORK"
<linux-kselftest@vger.kernel.org>,
netfilter-devel@vger.kernel.org, Netdev <netdev@vger.kernel.org>,
lkft-triage@lists.linaro.org, Florian Westphal <fw@strlen.de>,
fabf@skynet.be, Shuah Khan <shuah@kernel.org>,
Kees Cook <keescook@chromium.org>,
Anders Roxell <anders.roxell@linaro.org>
Subject: Re: selftests: netfilter: nft_nat.sh: /dev/stdin:2:9-15: Error: syntax error, unexpected counter
Date: Wed, 14 Oct 2020 21:30:34 +0200 [thread overview]
Message-ID: <20201014193034.GA14337@salvia> (raw)
In-Reply-To: <CA+G9fYv=zPRGCKyhi9DeUsvyb6ZLVVXdV3hW+15XnQN2R3ircQ@mail.gmail.com>
On Wed, Oct 14, 2020 at 05:19:33PM +0530, Naresh Kamboju wrote:
> While running kselftest netfilter test on x86_64 devices linux next
> tag 20201013 kernel
> these errors are noticed. This not specific to kernel version we have
> noticed these errors
> earlier also.
>
> Am I missing configs ?
What nftables version are you using?
> Please refer to the config file we are using.
> We are using the minimal busybox shell.
> BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
>
> metadata:
> git branch: master
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> git commit: f2fb1afc57304f9dd68c20a08270e287470af2eb
> git describe: next-20201013
> make_kernelversion: 5.9.0
> kernel-config:
> http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/intel-corei7-64/lkft/linux-next/879/config
>
> Test output log:
> --------------------
> selftests: netfilter: nft_nat.sh
> [ 1207.251385] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1207.342479] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # /dev/stdin:2:9-15: Error: syntax error, unexpected counter
> # counter ns0in {}
> # ^^^^^^^
> # /dev/stdin:3:9-15: Error: syntax error, unexpected counter
> # counter ns1in {}
> # ^^^^^^^
> # /dev/stdin:4:9-15: Error: syntax error, unexpected counter
> # counter ns2in {}
> # ^^^^^^^
> # /dev/stdin:6:9-15: Error: syntax error, unexpected counter
> # counter ns0out {}
> # ^^^^^^^
>
> <trim>
>
> # /dev/stdin:12:9-15: Error: syntax error, unexpected counter
> # counter ns2in6 {}
> # ^^^^^^^
> # /dev/stdin:14:9-15: Error: syntax error, unexpected counter
> # counter ns0out6 {}
> # ^^^^^^^
> [ 1208.229989] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in
> # ^^^^^^^
> # ERROR: ns0in counter in ns1-loU9Vlmj has unexpected value (expected
> packets 1 bytes 84) at check_counters 1
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in
> # ^^^^^^^
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0out
> # ^^^^^^^
> # ERROR: ns0out counter in ns1-loU9Vlmj has unexpected value (expected
> packets 1 bytes 84) at check_counters 2
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0out
> # ^^^^^^^
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in6
>
> # ERROR: ns1 counter in ns0-loU9Vlmj has unexpected value (expected
> packets 1 bytes 104) at check_ns0_counters 5
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns1
> # ^^^^^^^
>
> <trim>
>
> # <cmdline>:1:16-19: Error: syntax error, unexpected inet
> # reset counters inet
> # ^^^^
> # <cmdline>:1:16-19: Error: syntax error, unexpected inet
> # reset counters inet
> # ^^^^
> # FAIL: nftables v0.7 (Scrooge McDuck)
> not ok 2 selftests: netfilter: nft_nat.sh # exit=1
> # selftests: netfilter: bridge_brouter.sh
> # SKIP: Could not run test without ebtables
> ok 3 selftests: netfilter: bridge_brouter.sh # SKIP
> # selftests: netfilter: conntrack_icmp_related.sh
> [ 1215.679815] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1215.698932] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1215.711612] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1216.678043] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter unknown
> # ^^^^^^^
> # ERROR: counter unknown in nsclient1 has unexpected value (expected
> packets 0 bytes 0)
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter unknown
> # ^^^^^^^
>
> <trim>
>
> # ERROR: counter related in nsclient1 has unexpected value (expected
> packets 2 bytes 1856)
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter related
> # ^^^^^^^
> # ERROR: icmp error RELATED state test has failed
> not ok 4 selftests: netfilter: conntrack_icmp_related.sh # exit=1
> # selftests: netfilter: nft_flowtable.sh
> # Cannot create namespace file \"/var/run/netns/ns1\": File exists
> [ 1230.570705] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1230.757525] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1230.843221] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # PASS: netns routing/connectivity: ns1 can reach ns2
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # FAIL: file mismatch for ns1 -> ns2
> # -rw------- 1 root root 1079296 Oct 13 09:54 /tmp/tmp.EyNCJDBncG
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.CR5cdEqIHB
> # FAIL: file mismatch for ns1 <- ns2
> # -rw------- 1 root root 4677632 Oct 13 09:54 /tmp/tmp.NkSMo4ZijB
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.irBE9wPUAV
> # FAIL: flow offload for ns1/ns2:
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # FAIL: file mismatch for ns1 -> ns2
> # -rw------- 1 root root 1079296 Oct 13 09:54 /tmp/tmp.EyNCJDBncG
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.CR5cdEqIHB
> # FAIL: file mismatch for ns1 <- ns2
> # -rw------- 1 root root 4677632 Oct 13 09:54 /tmp/tmp.NkSMo4ZijB
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.irBE9wPUAV
> # FAIL: flow offload for ns1/ns2 with NAT
> # <cmdline>:1:1-23: Error: Could not process rule: Table 'filter' does not exist
> # list table inet filter
> # ^^^^^^^^^^^^^^^^^^^^^^^
> # <cmdline>:1:32-32: Error: syntax error, unexpected newline, expecting handle
> # delete rule inet filter forward
> # ^
> # FAIL: Could not delete large-packet accept rule
> not ok 5 selftests: netfilter: nft_flowtable.sh # exit=1
> # selftests: netfilter: ipvs.sh
> # skip: could not run test without ipvs module
> ok 6 selftests: netfilter: ipvs.sh # SKIP
> # selftests: netfilter: nft_concat_range.sh
> # TEST: reported issues
> # Add two elements, flush, re-add [
> 1240.096121] kauditd_printk_skb: 40 callbacks suppressed
> [ 1240.096124] audit: type=1325 audit(1602582894.032:87830):
> table=t:72;?:0 family=2 entries=1 op=nft_register_table pid=9084
> subj=kernel comm=\"nft\"
> [ 1240.114551] audit: type=1325 audit(1602582894.032:87830):
> table=t:72;s:1 family=2 entries=0 op=nft_register_set pid=9084
> subj=kernel comm=\"nft\"
> [ 1240.127450] audit: type=1325 audit(1602582894.032:87830):
> table=?:0;?:0 family=0 entries=2 op=nft_register_gen pid=9084
> subj=kernel comm=\"nft\"
> [FAIL]
> [ 1240.169015] audit: type=1325 audit(1602582894.105:87831):
> table=t:72;s:1 family=2 entries=0 op=nft_unregister_set pid=9087
> subj=kernel comm=\"nft\"
> [ 1240.182153] audit: type=1325 audit(1602582894.105:87831):
> table=t:72;?:0 family=2 entries=0 op=nft_unregister_table pid=9087
> subj=kernel comm=\"nft\"
> [ 1240.195412] audit: type=1325 audit(1602582894.105:87831):
> table=?:0;?:0 family=0 entries=3 op=nft_register_gen pid=9087
> subj=kernel comm=\"nft\"
> not ok 7 selftests: netfilter: nft_concat_range.sh # exit=1
> # selftests: netfilter: nft_conntrack_helper.sh
> # SKIP: Could not run test without conntrack tool
> ok 8 selftests: netfilter: nft_conntrack_helper.sh # SKIP
> # selftests: netfilter: nft_queue.sh
> [ 1242.587245] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1242.605473] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> [ 1243.557996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> # PASS: ns1-4ngWFkmc can reach ns2-4ngWFkmc
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # FAIL: ip expected failure, got 0
> not ok 9 selftests: netfilter: nft_queue.sh # exit=1
> # selftests: netfilter: nft_meta.sh
> # /dev/stdin:2:9-15: Error: syntax error, unexpected counter
> # counter iifcount {}
> # ^^^^^^^
> # /dev/stdin:3:9-15: Error: syntax error, [ 1245.942205] kselftest:
> Running tests in nsfs
> unexpected counter
> # counter iifnamecount {}
> # ^^^^^^^
> # /dev/stdin:4:9-15: Error: syntax error, unexpected counter
> # counter iifgroupcount {}
> # ^^^^^^^
>
> <trim>
>
> # /dev/stdin:11:9-15: Error: syntax error, unexpected counter
> # counter icurrentyearc[ 1246.027275] kselftest: Running tests in pidfd
> ounter {}
> # ^^^^^^^
> # SKIP: Could not add test ruleset
>
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>
> Full test log link,
> https://lkft.validation.linaro.org/scheduler/job/1839013#L12339
>
> --
> Linaro LKFT
> https://lkft.linaro.org
next prev parent reply other threads:[~2020-10-14 19:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 11:49 selftests: netfilter: nft_nat.sh: /dev/stdin:2:9-15: Error: syntax error, unexpected counter Naresh Kamboju
2020-10-14 19:30 ` Pablo Neira Ayuso [this message]
2020-10-15 3:01 ` Naresh Kamboju
2020-10-15 9:26 ` Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014193034.GA14337@salvia \
--to=pablo@netfilter.org \
--cc=anders.roxell@linaro.org \
--cc=fabf@skynet.be \
--cc=fw@strlen.de \
--cc=keescook@chromium.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=naresh.kamboju@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.