From: Johan Hovold <johan@kernel.org>
To: linux-usb@vger.kernel.org
Cc: Johan Hovold <johan@kernel.org>, stable@vger.kernel.org
Subject: [PATCH] USB: serial: digi_acceleport: fix write-wakeup deadlocks
Date: Mon, 26 Oct 2020 11:43:06 +0100 [thread overview]
Message-ID: <20201026104306.29576-1-johan@kernel.org> (raw)
The driver must not call tty_wakeup() while holding its private lock as
line disciplines are allowed to call back into write() from
write_wakeup(), leading to a deadlock.
Also remove the unneeded work struct that was used to defer wakeup in
order to work around a possible race in ancient times (see comment about
n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove
changelogs and old todo entries")).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/digi_acceleport.c | 45 ++++++++--------------------
1 file changed, 13 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 91055a191995..0d606fa9fdca 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -19,7 +19,6 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/wait.h>
@@ -198,14 +197,12 @@ struct digi_port {
int dp_throttle_restart;
wait_queue_head_t dp_flush_wait;
wait_queue_head_t dp_close_wait; /* wait queue for close */
- struct work_struct dp_wakeup_work;
struct usb_serial_port *dp_port;
};
/* Local Function Declarations */
-static void digi_wakeup_write_lock(struct work_struct *work);
static int digi_write_oob_command(struct usb_serial_port *port,
unsigned char *buf, int count, int interruptible);
static int digi_write_inb_command(struct usb_serial_port *port,
@@ -356,26 +353,6 @@ __releases(lock)
return timeout;
}
-
-/*
- * Digi Wakeup Write
- *
- * Wake up port, line discipline, and tty processes sleeping
- * on writes.
- */
-
-static void digi_wakeup_write_lock(struct work_struct *work)
-{
- struct digi_port *priv =
- container_of(work, struct digi_port, dp_wakeup_work);
- struct usb_serial_port *port = priv->dp_port;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->dp_port_lock, flags);
- tty_port_tty_wakeup(&port->port);
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-}
-
/*
* Digi Write OOB Command
*
@@ -986,6 +963,7 @@ static void digi_write_bulk_callback(struct urb *urb)
unsigned long flags;
int ret = 0;
int status = urb->status;
+ bool wakeup;
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
@@ -1012,6 +990,7 @@ static void digi_write_bulk_callback(struct urb *urb)
}
/* try to send any buffered data on this port */
+ wakeup = true;
spin_lock_irqsave(&priv->dp_port_lock, flags);
priv->dp_write_urb_in_use = 0;
if (priv->dp_out_buf_len > 0) {
@@ -1027,19 +1006,18 @@ static void digi_write_bulk_callback(struct urb *urb)
if (ret == 0) {
priv->dp_write_urb_in_use = 1;
priv->dp_out_buf_len = 0;
+ wakeup = false;
}
}
- /* wake up processes sleeping on writes immediately */
- tty_port_tty_wakeup(&port->port);
- /* also queue up a wakeup at scheduler time, in case we */
- /* lost the race in write_chan(). */
- schedule_work(&priv->dp_wakeup_work);
-
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
if (ret && ret != -EPERM)
dev_err_console(port,
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
}
static int digi_write_room(struct tty_struct *tty)
@@ -1239,7 +1217,6 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
init_waitqueue_head(&priv->dp_transmit_idle_wait);
init_waitqueue_head(&priv->dp_flush_wait);
init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
priv->dp_port = port;
init_waitqueue_head(&port->write_wait);
@@ -1508,13 +1485,14 @@ static int digi_read_oob_callback(struct urb *urb)
rts = C_CRTSCTS(tty);
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ bool wakeup = false;
+
spin_lock_irqsave(&priv->dp_port_lock, flags);
/* convert from digi flags to termiox flags */
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
priv->dp_modem_signals |= TIOCM_CTS;
- /* port must be open to use tty struct */
if (rts)
- tty_port_tty_wakeup(&port->port);
+ wakeup = true;
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
@@ -1533,6 +1511,9 @@ static int digi_read_oob_callback(struct urb *urb)
priv->dp_modem_signals &= ~TIOCM_CD;
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
spin_lock_irqsave(&priv->dp_port_lock, flags);
priv->dp_transmit_idle = 1;
--
2.26.2
next reply other threads:[~2020-10-26 10:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 10:43 Johan Hovold [this message]
2020-10-28 9:38 ` [PATCH] USB: serial: digi_acceleport: fix write-wakeup deadlocks Greg KH
2020-11-04 10:14 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026104306.29576-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.