Re: [PATCH v2 1/5] dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver

[Rob Herring <robh@kernel.org>]

On Mon, Oct 19, 2020 at 11:10:04PM +0900, Daniel Palmer wrote:
> Header adds defines for the gpio number of each pin
> from the driver view. The gpio block seems to support 128 lines
> but what line is mapped to a physical pin depends on the chip.
> The driver itself uses the index of a pin's offset in an array
> of the possible offsets for a chip as the gpio number.
> 
> The defines remove the need to work out that index to consume
> a pin in the device tree.

I'd expect the DT to have 0-127 numbering... If you need to map that to 
another number, then an array property in DT could handle that.

> 
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
>  MAINTAINERS                            |  1 +
>  include/dt-bindings/gpio/msc313-gpio.h | 95 ++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 include/dt-bindings/gpio/msc313-gpio.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3f345f36c22c..a188fae8c04e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2132,6 +2132,7 @@ W:	http://linux-chenxing.org/
>  F:	Documentation/devicetree/bindings/arm/mstar/*
>  F:	arch/arm/boot/dts/mstar-*
>  F:	arch/arm/mach-mstar/
> +F:	include/dt-bindings/gpio/msc313-gpio.h
>  
>  ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
>  M:	Michael Petchkovsky <mkpetch@internode.on.net>
> diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h
> new file mode 100644
> index 000000000000..9b8cd6ffb7c4
> --- /dev/null
> +++ b/include/dt-bindings/gpio/msc313-gpio.h
> @@ -0,0 +1,95 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * GPIO definitions for MStar/SigmaStar MSC313 and later SoCs
> + *
> + * Copyright (C) 2020 Daniel Palmer <daniel@thingy.jp>
> + */
> +
> +#ifndef _DT_BINDINGS_MSC313_GPIO_H
> +#define _DT_BINDINGS_MSC313_GPIO_H
> +
> +/* pin names for fuart, same for all SoCs so far */
> +#define MSC313_PINNAME_FUART_RX		"fuart_rx"
> +#define MSC313_PINNAME_FUART_TX		"fuart_tx"
> +#define MSC313_PINNAME_FUART_CTS	"fuart_cts"
> +#define MSC313_PINNAME_FUART_RTS	"fuart_rts"

Defines for strings serves no purpose.

> +
> +/* pin names for sr, mercury5 is different */
> +#define MSC313_PINNAME_SR_IO2		"sr_io2"
> +#define MSC313_PINNAME_SR_IO3		"sr_io3"
> +#define MSC313_PINNAME_SR_IO4		"sr_io4"
> +#define MSC313_PINNAME_SR_IO5		"sr_io5"
> +#define MSC313_PINNAME_SR_IO6		"sr_io6"
> +#define MSC313_PINNAME_SR_IO7		"sr_io7"
> +#define MSC313_PINNAME_SR_IO8		"sr_io8"
> +#define MSC313_PINNAME_SR_IO9		"sr_io9"
> +#define MSC313_PINNAME_SR_IO10		"sr_io10"
> +#define MSC313_PINNAME_SR_IO11		"sr_io11"
> +#define MSC313_PINNAME_SR_IO12		"sr_io12"
> +#define MSC313_PINNAME_SR_IO13		"sr_io13"
> +#define MSC313_PINNAME_SR_IO14		"sr_io14"
> +#define MSC313_PINNAME_SR_IO15		"sr_io15"
> +#define MSC313_PINNAME_SR_IO16		"sr_io16"
> +#define MSC313_PINNAME_SR_IO17		"sr_io17"
> +
> +/* pin names for sd, same for all SoCs so far */
> +#define MSC313_PINNAME_SD_CLK		"sd_clk"
> +#define MSC313_PINNAME_SD_CMD		"sd_cmd"
> +#define MSC313_PINNAME_SD_D0		"sd_d0"
> +#define MSC313_PINNAME_SD_D1		"sd_d1"
> +#define MSC313_PINNAME_SD_D2		"sd_d2"
> +#define MSC313_PINNAME_SD_D3		"sd_d3"
> +
> +/* pin names for i2c1, same for all SoCs so for */
> +#define MSC313_PINNAME_I2C1_SCL		"i2c1_scl"
> +#define MSC313_PINNAME_I2C1_SCA		"i2c1_sda"
> +
> +/* pin names for spi0, same for all SoCs so far */
> +#define MSC313_PINNAME_SPI0_CZ		"spi0_cz"
> +#define MSC313_PINNAME_SPI0_CK		"spi0_ck"
> +#define MSC313_PINNAME_SPI0_DI		"spi0_di"
> +#define MSC313_PINNAME_SPI0_DO		"spi0_do"
> +
> +#define MSC313_GPIO_FUART	0
> +#define MSC313_GPIO_FUART_RX	(MSC313_GPIO_FUART + 0)
> +#define MSC313_GPIO_FUART_TX	(MSC313_GPIO_FUART + 1)
> +#define MSC313_GPIO_FUART_CTS	(MSC313_GPIO_FUART + 2)
> +#define MSC313_GPIO_FUART_RTS	(MSC313_GPIO_FUART + 3)

We don't normally have defines for GPIO numbers either. 

> +
> +#define MSC313_GPIO_SR		(MSC313_GPIO_FUART_RTS + 1)
> +#define MSC313_GPIO_SR_IO2	(MSC313_GPIO_SR + 0)
> +#define MSC313_GPIO_SR_IO3	(MSC313_GPIO_SR + 1)
> +#define MSC313_GPIO_SR_IO4	(MSC313_GPIO_SR + 2)
> +#define MSC313_GPIO_SR_IO5	(MSC313_GPIO_SR + 3)
> +#define MSC313_GPIO_SR_IO6	(MSC313_GPIO_SR + 4)
> +#define MSC313_GPIO_SR_IO7	(MSC313_GPIO_SR + 5)
> +#define MSC313_GPIO_SR_IO8	(MSC313_GPIO_SR + 6)
> +#define MSC313_GPIO_SR_IO9	(MSC313_GPIO_SR + 7)
> +#define MSC313_GPIO_SR_IO10	(MSC313_GPIO_SR + 8)
> +#define MSC313_GPIO_SR_IO11	(MSC313_GPIO_SR + 9)
> +#define MSC313_GPIO_SR_IO12	(MSC313_GPIO_SR + 10)
> +#define MSC313_GPIO_SR_IO13	(MSC313_GPIO_SR + 11)
> +#define MSC313_GPIO_SR_IO14	(MSC313_GPIO_SR + 12)
> +#define MSC313_GPIO_SR_IO15	(MSC313_GPIO_SR + 13)
> +#define MSC313_GPIO_SR_IO16	(MSC313_GPIO_SR + 14)
> +#define MSC313_GPIO_SR_IO17	(MSC313_GPIO_SR + 15)
> +
> +#define MSC313_GPIO_SD		(MSC313_GPIO_SR_IO17 + 1)
> +#define MSC313_GPIO_SD_CLK	(MSC313_GPIO_SD + 0)
> +#define MSC313_GPIO_SD_CMD	(MSC313_GPIO_SD + 1)
> +#define MSC313_GPIO_SD_D0	(MSC313_GPIO_SD + 2)
> +#define MSC313_GPIO_SD_D1	(MSC313_GPIO_SD + 3)
> +#define MSC313_GPIO_SD_D2	(MSC313_GPIO_SD + 4)
> +#define MSC313_GPIO_SD_D3	(MSC313_GPIO_SD + 5)
> +
> +#define MSC313_GPIO_I2C1	(MSC313_GPIO_SD_D3 + 1)
> +#define MSC313_GPIO_I2C1_SCL	(MSC313_GPIO_I2C1 + 0)
> +#define MSC313_GPIO_I2C1_SDA	(MSC313_GPIO_I2C1 + 1)
> +
> +#define MSC313_GPIO_SPI0	(MSC313_GPIO_I2C1_SDA + 1)
> +#define MSC313_GPIO_SPI0_CZ	(MSC313_GPIO_SPI0 + 0)
> +#define MSC313_GPIO_SPI0_CK	(MSC313_GPIO_SPI0 + 1)
> +#define MSC313_GPIO_SPI0_DI	(MSC313_GPIO_SPI0 + 2)
> +#define MSC313_GPIO_SPI0_DO	(MSC313_GPIO_SPI0 + 3)
> +
> +#endif /* _DT_BINDINGS_MSC313_GPIO_H */
> -- 
> 2.28.0
>