Re: [PATCH net-next v2 0/5] Support for RollBall 10G copper SFP modules

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

A general point: please have me in the To: line rather than the Cc:
line so that I can find emails better; I've just spent quite a while
trying to find this series you posted last night amongst all the
other emails that I'm Cc'd on.

(The difference between To: and Cc: is that you expect those in the To:
header to be the primary recipients who you expect action from, and
those in the Cc: to be secondary recipients for information.)

https://blog.thedigitalgroup.com/to-vs-cc-vs-bcc-how-to-use-them-correctly
https://www.writebetteremails.com/to-cc.htm
https://thinkproductive.co.uk/email-using-cc-bcc-to/
... etc ...

Thanks.

On Thu, Oct 29, 2020 at 11:25:04PM +0100, Marek Behún wrote:
> Hello,
> 
> this is v2 of series adding support for RollBall/Hilink SFP modules.
> 
> Checked with:
>   checkpatch.pl --max-line-length=80
> 
> Changes from v1:
> - wrapped to 80 columns as per Russell's request
> - initialization of RollBall MDIO I2C protocol moved from sfp.c to
>   mdio-i2c.c as per Russell's request
> - second patch removes the 802.3z check also from phylink_sfp_config
>   as suggested by Russell
> - creation/destruction of mdiobus for SFP now occurs before probing
>   for PHY/after releasing PHY (as suggested by Russell)
> - the last patch became a little simpler after the above was done
> 
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Russell King <rmk+kernel@armlinux.org.uk>
> 
> Marek Behún (5):
>   net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules
>   net: phylink: allow attaching phy for SFP modules on 802.3z mode
>   net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY
>     release
>   net: phy: marvell10g: change MACTYPE if underlying MAC does not
>     support it
>   net: sfp: add support for multigig RollBall transceivers
> 
>  drivers/net/mdio/mdio-i2c.c   | 232 +++++++++++++++++++++++++++++++++-
>  drivers/net/phy/marvell10g.c  |  31 +++++
>  drivers/net/phy/phylink.c     |   5 +-
>  drivers/net/phy/sfp.c         |  67 ++++++++--
>  include/linux/mdio/mdio-i2c.h |   8 +-
>  5 files changed, 322 insertions(+), 21 deletions(-)
> 
> 
> base-commit: cd29296fdfca919590e4004a7e4905544f4c4a32
> -- 
> 2.26.2
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!