From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
linux-arm-msm@vger.kernel.org,
Jeevan Shriram <jshriram@codeaurora.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver
Date: Tue, 3 Nov 2020 10:26:16 -0600 [thread overview]
Message-ID: <20201103162616.GN3151@builder.lan> (raw)
In-Reply-To: <20201103055801.472736-2-vkoul@kernel.org>
On Mon 02 Nov 23:58 CST 2020, Vinod Koul wrote:
> From: Jeevan Shriram <jshriram@codeaurora.org>
>
> Add initial Qualcomm SDX55 pinctrl driver to support pin configuration
> with pinctrl framewor for SDX55 SoC.
>
> Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
> [ported from downstream and tidy up]
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
No changes since v1? ;)
> drivers/pinctrl/qcom/Kconfig | 9 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-sdx55.c | 1018 ++++++++++++++++++++++++++
> 3 files changed, 1028 insertions(+)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sdx55.c
[..]
> diff --git a/drivers/pinctrl/qcom/pinctrl-sdx55.c b/drivers/pinctrl/qcom/pinctrl-sdx55.c
[..]
> +static const struct msm_pingroup sdx55_groups[] = {
> + [0] = PINGROUP(0, uim2_data, blsp_uart1, qdss_stm, ebi0_wrcdc, _, _, _, _, _),
> + [1] = PINGROUP(1, uim2_present, blsp_uart1, qdss_stm, _, _, _, _, _, _),
> + [2] = PINGROUP(2, uim2_reset, blsp_uart1, blsp_i2c1, qdss_stm, ebi0_wrcdc, _, _, _, _),
> + [3] = PINGROUP(3, uim2_clk, blsp_uart1, blsp_i2c1, qdss_stm, _, _, _, _, _),
> + [4] = PINGROUP(4, blsp_spi2, blsp_uart2, _, qdss_stm, qdss_gpio, _, _, _, _),
> + [5] = PINGROUP(5, blsp_spi2, blsp_uart2, _, qdss_stm, qdss_gpio, _, _, _, _),
> + [6] = PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, char_exec, _, qdss_stm, qdss_gpio, _, _),
> + [7] = PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, char_exec, _, qdss_stm, qdss_gpio, _, _),
> + [8] = PINGROUP(8, pri_mi2s, blsp_spi3, blsp_uart3, ext_dbg, ldo_en, _, _, _, _),
> + [9] = PINGROUP(9, pri_mi2s, blsp_spi3, blsp_uart3, ext_dbg, _, _, _, _, _),
> + [10] = PINGROUP(10, pri_mi2s, blsp_spi3, blsp_uart3, blsp_i2c3, ext_dbg, _, _, _, _),
> + [11] = PINGROUP(11, pri_mi2s, blsp_spi3, blsp_uart3, blsp_i2c3, ext_dbg, gcc_gp3, _, _, _),
> + [12] = PINGROUP(12, pri_mi2s, _, qdss_stm, qdss_gpio, _, _, _, _, _),
> + [13] = PINGROUP(13, pri_mi2s, _, qdss_stm, qdss_gpio, _, _, _, _, _),
> + [14] = PINGROUP(14, pri_mi2s, emac_gcc1, _, _, qdss_stm, qdss_gpio, bimc_dte0, native_tsens, vsense_trigger),
> + [15] = PINGROUP(15, pri_mi2s, emac_gcc0, _, _, qdss_stm, qdss_gpio, bimc_dte1, _, _),
> + [16] = PINGROUP(16, sec_mi2s, blsp_spi4, blsp_uart4, qdss_cti, qdss_cti, _, _, qdss_stm, qdss_gpio),
> + [17] = PINGROUP(17, sec_mi2s, blsp_spi4, blsp_uart4, qdss_cti, qdss_cti, _, qdss_stm, qdss_gpio, _),
> + [18] = PINGROUP(18, sec_mi2s, blsp_spi4, blsp_uart4, blsp_i2c4, gcc_gp1, qdss_stm, qdss_gpio, _, _),
> + [19] = PINGROUP(19, sec_mi2s, blsp_spi4, blsp_uart4, blsp_i2c4, jitter_bist, gcc_gp2, _, qdss_stm, qdss_gpio),
> + [20] = PINGROUP(20, sec_mi2s, ebi2_a, blsp_uart1, blsp_uart4, qdss_stm, _, _, _, _),
> + [21] = PINGROUP(21, sec_mi2s, ebi2_lcd, blsp_uart1, blsp_uart4, _, qdss_stm, _, _, _),
> + [22] = PINGROUP(22, sec_mi2s, ebi2_lcd, blsp_uart1, qdss_cti, qdss_cti, blsp_uart4, pll_bist, _, qdss_stm),
> + [23] = PINGROUP(23, sec_mi2s, ebi2_lcd, qdss_cti, qdss_cti, blsp_uart1, blsp_uart4, qdss_stm, _, _),
> + [24] = PINGROUP(24, adsp_ext, _, _, _, _, _, _, _, _),
> + [25] = PINGROUP(25, adsp_ext, _, _, _, _, _, _, _, _),
> + [26] = PINGROUP(26, _, _, _, native_char, _, _, _, _, _),
> + [27] = PINGROUP(27, _, _, _, _, _, _, _, _, _),
> + [28] = PINGROUP(28, qlink0_wmss, _, native_char3, _, _, _, _, _, _),
> + [29] = PINGROUP(29, _, _, _, native_char2, native_tsense, _, _, _, _),
> + [30] = PINGROUP(30, _, _, _, _, _, _, _, _, _),
> + [31] = PINGROUP(31, nav_gpio, _, _, _, _, _, _, _, _),
> + [32] = PINGROUP(32, nav_gpio, pll_ref, _, _, _, _, _, _, _),
> + [33] = PINGROUP(33, _, pa_indicator, native_char0, _, _, _, _, _, _),
> + [34] = PINGROUP(34, qlink0_en, _, _, _, _, _, _, _, _),
> + [35] = PINGROUP(35, qlink0_req, pll_test, _, _, _, _, _, _, _),
> + [36] = PINGROUP(36, _, _, cri_trng, dbg_out, _, _, _, _, _),
> + [37] = PINGROUP(37, _, _, _, _, _, _, _, _, _),
> + [38] = PINGROUP(38, _, _, prng_rosc, _, _, _, _, _, _),
> + [39] = PINGROUP(39, _, _, _, _, _, _, _, _, _),
> + [40] = PINGROUP(40, _, _, cri_trng0, _, _, _, _, _, _),
> + [41] = PINGROUP(41, _, _, cri_trng1, _, _, _, _, _, _),
> + [42] = PINGROUP(42, _, qdss_gpio, native_char1, _, _, _, _, _, _),
> + [43] = PINGROUP(43, _, _, _, _, _, _, _, _, _),
> + [44] = PINGROUP(44, coex_uart, spmi_coex, _, qdss_stm, _, _, _, _, _),
> + [45] = PINGROUP(45, coex_uart, spmi_coex, qdss_stm, ddr_pxi0, _, _, _, _, _),
> + [46] = PINGROUP(46, m_voc, ddr_bist, ddr_pxi0, _, _, _, _, _, _),
> + [47] = PINGROUP(47, ddr_bist, _, _, _, _, _, _, _, _),
> + [48] = PINGROUP(48, m_voc, ddr_bist, _, _, _, _, _, _, _),
> + [49] = PINGROUP(49, m_voc, ddr_bist, _, _, _, _, _, _, _),
> + [50] = PINGROUP(50, _, _, _, _, _, _, _, _, _),
> + [51] = PINGROUP(51, _, _, _, _, _, _, _, _, _),
> + [52] = PINGROUP(52, blsp_spi2, blsp_spi1, blsp_spi3, blsp_spi4, _, _, qdss_stm, _, _),
> + [53] = PINGROUP(53, pci_e, _, _, qdss_stm, _, _, _, _, _),
> + [54] = PINGROUP(54, qdss_cti, qdss_cti, _, _, _, _, _, _, _),
> + [55] = PINGROUP(55, qdss_cti, qdss_cti, tgu_ch0, _, _, _, _, _, _),
> + [56] = PINGROUP(56, pcie_clkreq, _, qdss_stm, _, _, _, _, _, _),
> + [57] = PINGROUP(57, _, qdss_stm, _, _, _, _, _, _, _),
> + [58] = PINGROUP(58, _, _, _, _, _, _, _, _, _),
> + [59] = PINGROUP(59, qdss_cti, m_voc, bimc_dte0, _, _, _, _, _, _),
> + [60] = PINGROUP(60, qdss_cti, _, m_voc, _, _, _, _, _, _),
> + [61] = PINGROUP(61, mgpi_clk, qdss_stm, qdss_gpio, bimc_dte1, _, _, _, _, _),
> + [62] = PINGROUP(62, i2s_mclk, audio_ref, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, ldo_update, qdss_stm, _),
> + [63] = PINGROUP(63, blsp_uart2, _, qdss_stm, qdss_gpio, atest, _, _, _, _),
> + [64] = PINGROUP(64, blsp_uart2, qdss_stm, qdss_gpio, atest, _, _, _, _, _),
> + [65] = PINGROUP(65, blsp_uart2, blsp_i2c2, _, qdss_stm, qdss_gpio, atest, _, _, _),
> + [66] = PINGROUP(66, blsp_uart2, blsp_i2c2, qdss_stm, qdss_gpio, atest, _, _, _, _),
> + [67] = PINGROUP(67, uim1_data, atest, _, _, _, _, _, _, _),
> + [68] = PINGROUP(68, uim1_present, _, _, _, _, _, _, _, _),
> + [69] = PINGROUP(69, uim1_reset, _, _, _, _, _, _, _, _),
> + [70] = PINGROUP(70, uim1_clk, _, _, _, _, _, _, _, _),
> + [71] = PINGROUP(71, mgpi_clk, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, _, _, _, _),
> + [72] = PINGROUP(72, qlink1_en, _, _, _, _, _, _, _, _),
> + [73] = PINGROUP(73, qlink1_req, _, _, _, _, _, _, _, _),
> + [74] = PINGROUP(74, qlink1_wmss, _, _, _, _, _, _, _, _),
> + [75] = PINGROUP(75, coex_uart2, _, _, _, _, _, _, _, _),
> + [76] = PINGROUP(76, coex_uart2, nav_gpio, _, _, _, _, _, _, _),
> + [77] = PINGROUP(77, _, _, _, _, _, _, _, _, _),
> + [78] = PINGROUP(78, spmi_vgi, blsp_i2c4, _, _, _, _, _, _, _),
> + [79] = PINGROUP(79, spmi_vgi, blsp_i2c4, _, _, _, _, _, _, _),
> + [80] = PINGROUP(80, _, blsp_spi1, _, _, _, _, _, _, _),
> + [81] = PINGROUP(81, _, blsp_spi1, _, gcc_plltest, _, _, _, _, _),
> + [82] = PINGROUP(82, _, blsp_spi1, _, blsp_i2c1, gcc_plltest, _, _, _, _),
> + [83] = PINGROUP(83, _, blsp_spi1, _, blsp_i2c1, _, _, _, _, _),
> + [84] = PINGROUP(84, _, _, _, _, _, _, _, _, _),
> + [85] = PINGROUP(85, _, _, _, _, _, _, _, _, _),
> + [86] = PINGROUP(86, _, _, _, _, _, _, _, _, _),
> + [87] = PINGROUP(87, _, _, _, _, _, _, _, _, _),
> + [88] = PINGROUP(88, _, _, _, _, _, _, _, _, _),
> + [89] = PINGROUP(89, _, _, _, _, _, _, _, _, _),
> + [90] = PINGROUP(90, _, _, _, _, _, _, _, _, _),
> + [91] = PINGROUP(91, _, _, _, _, _, _, _, _, _),
> + [92] = PINGROUP(92, _, _, _, _, _, _, _, _, _),
> + [93] = PINGROUP(93, _, _, usb2phy_ac, _, _, _, _, _, _),
> + [94] = PINGROUP(94, qdss_cti, qdss_cti, _, _, _, _, _, _, _),
> + [95] = PINGROUP(95, qdss_cti, qdss_cti, emac_pps1, _, _, _, _, _, _),
> + [96] = PINGROUP(96, _, _, _, _, _, _, _, _, _),
> + [97] = PINGROUP(97, _, _, _, _, _, _, _, _, _),
> + [98] = PINGROUP(98, _, _, _, _, _, _, _, _, _),
> + [99] = PINGROUP(99, _, _, _, _, _, _, _, _, _),
> + [100] = PINGROUP(100, _, _, _, _, _, _, _, _, _),
> + [101] = PINGROUP(101, _, _, _, _, _, _, _, _, _),
> + [102] = PINGROUP(102, _, _, _, _, _, _, _, _, _),
> + [103] = PINGROUP(103, _, _, _, _, _, _, _, _, _),
> + [104] = PINGROUP(104, _, _, _, _, _, _, _, _, _),
> + [105] = PINGROUP(105, _, _, _, _, _, _, _, _, _),
> + [106] = PINGROUP(106, emac_pps0, _, _, _, _, _, _, _, _),
> + [107] = PINGROUP(107, _, _, _, _, _, _, _, _, _),
> + [109] = SDC_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
> + [110] = SDC_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
> + [111] = SDC_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
> + [112] = SDC_PINGROUP(sdc1_data, 0x9a000, 9, 0),
> +};
Looks better, and ngpios is good.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Thanks,
Bjorn
next prev parent reply other threads:[~2020-11-03 16:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 5:58 [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings Vinod Koul
2020-11-03 5:58 ` [PATCH v2 2/2] pinctrl: qcom: Add SDX55 pincontrol driver Vinod Koul
2020-11-03 16:26 ` Bjorn Andersson [this message]
2020-11-05 14:14 ` Linus Walleij
2020-11-06 9:41 ` Vinod Koul
2020-11-03 16:43 ` [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings Bjorn Andersson
2020-11-04 18:54 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201103162616.GN3151@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jshriram@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.