All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Nicolas Pitre <nico@fluxnic.net>
Cc: devicetree@vger.kernel.org,
	Laura Nixon <laura.nixon@team.mipi.org>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Rob Herring <robh+dt@kernel.org>,
	Robert Gough <robert.gough@intel.com>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Nicolas Pitre <npitre@baylibre.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Matthew Schnoor <matthew.schnoor@intel.com>,
	linux-i3c@lists.infradead.org
Subject: Re: [PATCH v3 1/2] dt-bindings: i3c: MIPI I3C Host Controller Interface
Date: Wed, 4 Nov 2020 12:33:46 -0600	[thread overview]
Message-ID: <20201104183346.GC3913864@bogus> (raw)
In-Reply-To: <20201102222220.1785859-2-nico@fluxnic.net>

On Mon, 02 Nov 2020 17:22:19 -0500, Nicolas Pitre wrote:
> From: Nicolas Pitre <npitre@baylibre.com>
> 
> The MIPI I3C HCI (Host Controller Interface) specification defines
> a common software driver interface to support compliant MIPI I3C
> host controller hardware implementations from multiple vendors.
> 
> All that is needed is an I/O area and an interrupt signal;. The hardware
> is self-advertising wrt its implementor and implemented capabilities so
> there is currently no details that the driver can't figure out on its own.
> 
> Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
> ---
>  .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml


See https://patchwork.ozlabs.org/patch/1392544

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Nicolas Pitre <nico@fluxnic.net>
Cc: linux-i3c@lists.infradead.org, Sakari Ailus <sakari.ailus@iki.fi>,
	devicetree@vger.kernel.org,
	Laura Nixon <laura.nixon@team.mipi.org>,
	Matthew Schnoor <matthew.schnoor@intel.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Robert Gough <robert.gough@intel.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Pitre <npitre@baylibre.com>
Subject: Re: [PATCH v3 1/2] dt-bindings: i3c: MIPI I3C Host Controller Interface
Date: Wed, 4 Nov 2020 12:33:46 -0600	[thread overview]
Message-ID: <20201104183346.GC3913864@bogus> (raw)
In-Reply-To: <20201102222220.1785859-2-nico@fluxnic.net>

On Mon, 02 Nov 2020 17:22:19 -0500, Nicolas Pitre wrote:
> From: Nicolas Pitre <npitre@baylibre.com>
> 
> The MIPI I3C HCI (Host Controller Interface) specification defines
> a common software driver interface to support compliant MIPI I3C
> host controller hardware implementations from multiple vendors.
> 
> All that is needed is an I/O area and an interrupt signal;. The hardware
> is self-advertising wrt its implementor and implemented capabilities so
> there is currently no details that the driver can't figure out on its own.
> 
> Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
> ---
>  .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml


See https://patchwork.ozlabs.org/patch/1392544

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


  reply	other threads:[~2020-11-04 18:33 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-02 22:22 [PATCH v3 0/2] MIPI I3c HCI (Host Controller Interface) driver Nicolas Pitre
2020-11-02 22:22 ` Nicolas Pitre
2020-11-02 22:22 ` [PATCH v3 1/2] dt-bindings: i3c: MIPI I3C Host Controller Interface Nicolas Pitre
2020-11-02 22:22   ` Nicolas Pitre
2020-11-04 18:33   ` Rob Herring [this message]
2020-11-04 18:33     ` Rob Herring
2020-11-04 18:34   ` Rob Herring
2020-11-04 18:34     ` Rob Herring
2020-11-04 19:28     ` Nicolas Pitre
2020-11-04 19:28       ` Nicolas Pitre
2020-11-02 22:22 ` [PATCH v3 2/2] i3c/master: introduce the mipi-i3c-hci driver Nicolas Pitre
2020-11-02 22:22   ` Nicolas Pitre
2020-11-10 11:09   ` kernel test robot
2020-11-10 11:09     ` kernel test robot
2020-11-10 11:09     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201104183346.GC3913864@bogus \
    --to=robh@kernel.org \
    --cc=boris.brezillon@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=laura.nixon@team.mipi.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=matthew.schnoor@intel.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=nico@fluxnic.net \
    --cc=npitre@baylibre.com \
    --cc=robert.gough@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.