Re: [PATCH v4 2/4] mfd: Support ROHM BD9576MUF and BD9573MUF

[Lee Jones <lee.jones@linaro.org>]

On Wed, 04 Nov 2020, Lee Jones wrote:

> On Wed, 28 Oct 2020, Matti Vaittinen wrote:
> 
> > Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
> > mainly used to power the R-Car series processors.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > ---
> >  drivers/mfd/Kconfig              |  11 +++
> >  drivers/mfd/Makefile             |   1 +
> >  drivers/mfd/rohm-bd9576.c        | 130 +++++++++++++++++++++++++++++++
> >  include/linux/mfd/rohm-bd957x.h  |  59 ++++++++++++++
> >  include/linux/mfd/rohm-generic.h |   2 +
> >  5 files changed, 203 insertions(+)
> >  create mode 100644 drivers/mfd/rohm-bd9576.c
> >  create mode 100644 include/linux/mfd/rohm-bd957x.h

[...]

> > +static const struct regmap_range volatile_ranges[] = {
> > +	{
> > +		.range_min = BD957X_REG_SMRB_ASSERT,
> > +		.range_max = BD957X_REG_SMRB_ASSERT,
> > +	},
> > +	{
> 
> The way you space your braces is not consistent.
> 
> > +		.range_min = BD957X_REG_PMIC_INTERNAL_STAT,
> > +		.range_max = BD957X_REG_PMIC_INTERNAL_STAT,
> > +	},
> > +	{
> > +		.range_min = BD957X_REG_INT_THERM_STAT,
> > +		.range_max = BD957X_REG_INT_THERM_STAT,
> > +	},
> > +	{
> > +		.range_min = BD957X_REG_INT_OVP_STAT,
> > +		.range_max = BD957X_REG_INT_SYS_STAT,
> > +	}, {
> > +		.range_min = BD957X_REG_INT_MAIN_STAT,
> > +		.range_max = BD957X_REG_INT_MAIN_STAT,
> > +	},
> > +};

Don't forget about this.

I would prefer to have the braces on the same line (even if it means
you have to change an extra line when editing), but I'm not 100% dead
set on it.  Consistency however, I am.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog