From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Claire Chang <tientzu@chromium.org>
Subject: [PATCH 4.14 37/48] serial: 8250_mtk: Fix uart_get_baud_rate warning
Date: Mon, 9 Nov 2020 13:55:46 +0100 [thread overview]
Message-ID: <20201109125018.583456285@linuxfoundation.org> (raw)
In-Reply-To: <20201109125016.734107741@linuxfoundation.org>
From: Claire Chang <tientzu@chromium.org>
commit 912ab37c798770f21b182d656937072b58553378 upstream.
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().
Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_mtk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -56,7 +56,7 @@ mtk8250_set_termios(struct uart_port *po
*/
baud = tty_termios_baud_rate(termios);
- serial8250_do_set_termios(port, termios, old);
+ serial8250_do_set_termios(port, termios, NULL);
tty_termios_encode_baud_rate(termios, baud, baud);
next prev parent reply other threads:[~2020-11-09 13:07 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 12:55 [PATCH 4.14 00/48] 4.14.205-rc1 review Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 01/48] drm/i915: Break up error capture compression loops with cond_resched() Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 02/48] xen/events: dont use chip_data for legacy IRQs Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 03/48] tipc: fix use-after-free in tipc_bcast_get_mode Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 04/48] gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 05/48] gianfar: Account for Tx PTP timestamp in the skb headroom Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 06/48] net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 07/48] sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 08/48] sfp: Fix error handing in sfp_probe() Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 09/48] Blktrace: bail out early if block debugfs is not configured Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 10/48] blktrace: fix debugfs use after free Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 11/48] i40e: Fix a potential NULL pointer dereference Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 12/48] i40e: add num_vectors checker in iwarp handler Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 13/48] i40e: Wrong truncation from u16 to u8 Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 14/48] i40e: Fix of memory leak and integer truncation in i40e_virtchnl.c Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 15/48] i40e: Memory leak in i40e_config_iwarp_qvlist Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 16/48] Fonts: Replace discarded const qualifier Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 17/48] ALSA: usb-audio: Add implicit feedback quirk for Qu-16 Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 18/48] lib/crc32test: remove extra local_irq_disable/enable Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 19/48] kthread_worker: prevent queuing delayed work from timer_fn when it is being canceled Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 20/48] mm: always have io_remap_pfn_range() set pgprot_decrypted() Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 21/48] gfs2: Wake up when sd_glock_disposal becomes zero Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 22/48] ftrace: Fix recursion check for NMI test Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 23/48] ftrace: Handle tracing when switching between context Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 24/48] tracing: Fix out of bounds write in get_trace_buf Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 25/48] futex: Handle transient "ownerless" rtmutex state correctly Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 26/48] ARM: dts: sun4i-a10: fix cpu_alert temperature Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 27/48] x86/kexec: Use up-to-dated screen_info copy to fill boot params Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 28/48] of: Fix reserved-memory overlap detection Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 29/48] blk-cgroup: Fix memleak on error path Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 30/48] blk-cgroup: Pre-allocate tree node on blkg_conf_prep Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 31/48] scsi: core: Dont start concurrent async scan on same host Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 32/48] vsock: use ns_capable_noaudit() on socket create Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 33/48] drm/vc4: drv: Add error handding for bind Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 34/48] ACPI: NFIT: Fix comparison to -ENXIO Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 35/48] vt: Disable KD_FONT_OP_COPY Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 36/48] fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parent Greg Kroah-Hartman
2020-11-09 12:55 ` Greg Kroah-Hartman [this message]
2020-11-09 12:55 ` [PATCH 4.14 38/48] serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 39/48] USB: serial: cyberjack: fix write-URB completion race Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 40/48] USB: serial: option: add Quectel EC200T module support Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 41/48] USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 42/48] USB: serial: option: add Telit FN980 composition 0x1055 Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 43/48] USB: Add NO_LPM quirk for Kingston flash drive Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 44/48] usb: mtu3: fix panic in mtu3_gadget_stop() Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 45/48] ARC: stack unwinding: avoid indefinite looping Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 46/48] Revert "ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE" Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 47/48] PM: runtime: Resume the device earlier in __device_release_driver() Greg Kroah-Hartman
2020-11-09 12:55 ` [PATCH 4.14 48/48] arm64: dts: marvell: espressobin: add ethernet alias Greg Kroah-Hartman
2020-11-09 15:41 ` [PATCH 4.14 00/48] 4.14.205-rc1 review Jon Hunter
2020-11-09 23:04 ` Guenter Roeck
2020-11-09 23:24 ` Shuah Khan
2020-11-09 23:26 ` Shuah Khan
2020-11-10 10:04 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201109125018.583456285@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tientzu@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.