From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from m42-4.mailgun.net ([69.72.42.4]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kcYOf-0002ig-V3 for ath11k@lists.infradead.org; Tue, 10 Nov 2020 18:29:39 +0000 MIME-Version: 1.0 Subject: Re: [PATCH] ath11k: fix rmmod failure if qmi sequence fails From: Kalle Valo In-Reply-To: <1602929817-25920-1-git-send-email-akolli@codeaurora.org> References: <1602929817-25920-1-git-send-email-akolli@codeaurora.org> Message-Id: <20201110182932.361D6C433FE@smtp.codeaurora.org> Date: Tue, 10 Nov 2020 18:29:32 +0000 (UTC) List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath11k" Errors-To: ath11k-bounces+kvalo=adurom.com@lists.infradead.org To: Anilkumar Kolli Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org Anilkumar Kolli wrote: > QMI sequence fails if caldata file is not available. > It is observed that 'rmmod ath11k' fails if qmi message fails. > With this patch rmmod/insmod is working. > > Logs: > Direct firmware load for IPQ8074/caldata.bin failed with error -2 > Falling back to user helper > qmi failed to load CAL: IPQ8074/caldata.bin > qmi failed to load board data file:-11 > > Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Anilkumar Kolli Does not apply, please rebase. error: patch failed: drivers/net/wireless/ath/ath11k/qmi.c:2621 error: drivers/net/wireless/ath/ath11k/qmi.c: patch does not apply stg import: Diff does not apply cleanly Patch set to Changes Requested. -- https://patchwork.kernel.org/project/linux-wireless/patch/1602929817-25920-1-git-send-email-akolli@codeaurora.org/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k