Re: [PATCH v1] arm64: dts: sc7180: Add camera clock controller node

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Fri 06 Nov 12:38 CST 2020, Taniya Das wrote:

> Add the camera clock controller node supported on SC7180.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index f5ef2cb..e795dba 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -5,6 +5,7 @@
>   * Copyright (c) 2019, The Linux Foundation. All rights reserved.
>   */
> 
> +#include <dt-bindings/clock/qcom,camcc-sc7180.h>

Applied the patch without this include, as it was not available in the
tag I branched off my 5.11 branch off.

Regards,
Bjorn

>  #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
>  #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>  #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
> @@ -2896,6 +2897,18 @@
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
> 
> +		camcc: clock-controller@ad00000 {
> +			compatible = "qcom,sc7180-camcc";
> +			reg = <0 0x0ad00000 0 0x10000>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +			       <&gcc GCC_CAMERA_AHB_CLK>,
> +			       <&gcc GCC_CAMERA_XO_CLK>;
> +			clock-names = "bi_tcxo", "iface", "xo";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		mdss: mdss@ae00000 {
>  			compatible = "qcom,sc7180-mdss";
>  			reg = <0 0x0ae00000 0 0x1000>;
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the  Linux Foundation.
>