[PATCH mvebu-dt v2 0/6] Turris Omnia device-tree changes

["Marek Behún" <kabel@kernel.org>]

Hi Gregory,

v2 of series with changes for Turris Omnia device tree.
It applies on mvebu-dt branch.

Changes from v1:
- added patch which adds description for switch interrupt
- removed patch adding ethernet-phy interrupt: the PHY interrupt is
  asserted by level low, but the GPIO expander driver supports only
  edge rising/falling, and even then it may not be correct when an
  interrupt storm occurs. So keep polling the PHY
- added Andrew's Reviewed-by tags

Marek

Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org

Marek Behún (6):
  ARM: dts: turris-omnia: enable HW buffer management
  ARM: dts: turris-omnia: add comphy handle to eth2
  ARM: dts: turris-omnia: describe switch interrupt
  ARM: dts: turris-omnia: add SFP node
  ARM: dts: turris-omnia: add LED controller node
  ARM: dts: turris-omnia: update ethernet-phy node and handle name

 arch/arm/boot/dts/armada-385-turris-omnia.dts | 162 +++++++++++++++++-
 1 file changed, 157 insertions(+), 5 deletions(-)

-- 
2.26.2