From: Joerg Vehlow <lkml@jv-coder.de>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH 2/3] network/stress/multicast/query-flood: Convert to tst_net.sh
Date: Mon, 16 Nov 2020 13:46:10 +0100 [thread overview]
Message-ID: <20201116124611.16919-3-lkml@jv-coder.de> (raw)
In-Reply-To: <20201116124611.16919-1-lkml@jv-coder.de>
From: Joerg Vehlow <joerg.vehlow@aox-tech.de>
Signed-off-by: Joerg Vehlow <joerg.vehlow@aox-tech.de>
---
.../multicast/query-flood/mcast4-queryfld01 | 153 ++++-----------
.../multicast/query-flood/mcast4-queryfld02 | 145 ++++----------
.../multicast/query-flood/mcast4-queryfld03 | 142 ++++----------
.../multicast/query-flood/mcast4-queryfld04 | 148 ++++----------
.../multicast/query-flood/mcast4-queryfld05 | 181 ++++++------------
.../multicast/query-flood/mcast4-queryfld06 | 166 +++++-----------
.../multicast/query-flood/mcast6-queryfld01 | 144 ++++----------
.../multicast/query-flood/mcast6-queryfld02 | 140 ++++----------
.../multicast/query-flood/mcast6-queryfld03 | 144 ++++----------
.../multicast/query-flood/mcast6-queryfld04 | 147 ++++----------
.../multicast/query-flood/mcast6-queryfld05 | 180 ++++++-----------
.../multicast/query-flood/mcast6-queryfld06 | 177 ++++++-----------
12 files changed, 503 insertions(+), 1364 deletions(-)
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld01 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld01
index 992cf423e..a659db387 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld01
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld01
@@ -42,40 +42,18 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld01
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
+. tst_net.sh
#-----------------------------------------------------------------------
#
@@ -87,13 +65,9 @@ MCAST_ADDR_PREFIX=224.10
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -107,59 +81,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -169,31 +101,24 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of General Query in $NS_DURATION [sec]"
-
-do_setup
-
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
-
-# Send IGMP General Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -t $NS_DURATION -r 0' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start IGMP querier"
- exit 1
-fi
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of General Query in $NS_DURATION [sec]"
+
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
+
+ # Send IGMP General Query from the remote host
+ tst_rhost_run -s -c "ns-igmp_querier -I $rhost_ifname -t $NS_DURATION -r 0"
+
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld02 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld02
index b731e0218..d71650acf 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld02
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld02
@@ -43,43 +43,22 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld02
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
# Multicast Address
MCAST_ADDR=224.10.0.1 # If you modify this, please refer ns-mcast_join.c
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -90,13 +69,9 @@ MCAST_ADDR=224.10.0.1 # If you modify this, please refer ns-mcast_join.c
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -110,59 +85,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -172,31 +105,25 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
-do_setup
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-# Send IGMP Multicast Address Specific Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -m $MCAST_ADDR -t $NS_DURATION -r 0' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start IGMP querier"
- exit 1
-fi
+ # Send IGMP Multicast Address Specific Query from the remote host
+ tst_rhost_run -s -c "ns-igmp_querier -I $rhost_ifname -m $MCAST_ADDR -t $NS_DURATION -r 0"
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld03 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld03
index 568178b32..a3e05a61e 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld03
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld03
@@ -43,37 +43,14 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld03
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
@@ -86,6 +63,8 @@ SRC_ADDR=10.10.10.1
# Filter Mode
FILTER_MODE="include"
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -96,13 +75,9 @@ FILTER_MODE="include"
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -116,59 +91,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -178,31 +111,24 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
-
-do_setup
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv4 multicast group on a single socket, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
-# Send IGMP Multicast Address and Source Specific Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -m $MCAST_ADDR -s $SRC_ADDR -t $NS_DURATION -r 0' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start IGMP querier"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
+ # Send IGMP Multicast Address and Source Specific Query from the remote host
+ tst_rhost_run -s -c "ns-igmp_querier -I $rhost_ifname -m $MCAST_ADDR -s $SRC_ADDR -t $NS_DURATION -r 0"
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld04 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld04
index f89393ffc..74e8bf489 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld04
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld04
@@ -42,43 +42,18 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld04
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# Number of the multicast to join
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
+. tst_net.sh
#-----------------------------------------------------------------------
#
@@ -90,13 +65,9 @@ MCAST_ADDR_PREFIX=224.10
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -110,59 +81,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -172,31 +101,24 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of General Query in $NS_DURATION [sec]"
-
-do_setup
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of General Query in $NS_DURATION [sec]"
-# Send IGMP General Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -t $NS_DURATION -r 0' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start IGMP querier"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
+ # Send IGMP General Query from the remote host
+ tst_rhost_run -s -c "ns-igmp_querier -I $rhost_ifname -t $NS_DURATION -r 0"
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld05 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld05
index 6d73027a6..0ef1f9add 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld05
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld05
@@ -43,23 +43,10 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld05
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# Number of the multicast to join
MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
@@ -67,19 +54,11 @@ MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -90,13 +69,9 @@ MCAST_ADDR_PREFIX=224.10
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -110,59 +85,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -172,42 +105,40 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
-
-do_setup
-
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX > /dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
-
-# Send IGMP Multicast Address Specific Query from the remote host
-querier_num=0
-while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
- # Define the multicast address
- x=`expr $querier_num \/ 254`
- y=`expr $querier_num % 254 + 1`
- if [ $x -gt 254 ]; then
- tst_resm TINFO "The number of the connection is less than $querier_num"
- break
- fi
- mcast_addr=${MCAST_ADDR_PREFIX}.${x}.${y}
-
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -m $mcast_addr -t $NS_DURATION -r 0 -b
-
- querier_num=`expr $querier_num + 1`
-done
-sleep $NS_DURATION
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-do_cleanup
-tst_resm TPASS "Test is finished successfully."
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
+
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX > /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
+
+ # Send IGMP Multicast Address Specific Query from the remote host
+ querier_num=0
+ while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
+ # Define the multicast address
+ x=`expr $querier_num \/ 254`
+ y=`expr $querier_num % 254 + 1`
+ if [ $x -gt 254 ]; then
+ tst_res TINFO "The number of the connection is less than $querier_num"
+ break
+ fi
+ mcast_addr=${MCAST_ADDR_PREFIX}.${x}.${y}
+
+ tst_rhost_run -c "ns-igmp_querier -I $rhost_ifname -m $mcast_addr -t $NS_DURATION -r 0 -b"
+
+ querier_num=`expr $querier_num + 1`
+ done
+
+ sleep $NS_DURATION
+
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast4-queryfld06 b/testcases/network/stress/multicast/query-flood/mcast4-queryfld06
index b45162045..b2b8ef3d4 100644
--- a/testcases/network/stress/multicast/query-flood/mcast4-queryfld06
+++ b/testcases/network/stress/multicast/query-flood/mcast4-queryfld06
@@ -43,23 +43,10 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-queryfld06
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# Number of the multicast to join
MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
@@ -67,16 +54,6 @@ MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=224.10
@@ -86,6 +63,8 @@ SRC_ADDR=10.10.10.1
# Filter Mode
FILTER_MODE="include"
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -96,13 +75,9 @@ FILTER_MODE="include"
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-igmp_querier >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "killall -SIGHUP ns-igmp_querier >/dev/null 2>&1"
}
@@ -116,59 +91,17 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
+ # Make sure the sysctl values
+ sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
+ sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
+ sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
}
@@ -178,42 +111,39 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
-
-do_setup
-
-# Run a multicast join tool
-ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE > /dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
-
-# Send IGMP Multicast Address Specific Query from the remote host
-querier_num=0
-while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
- # Define the multicast address
- x=`expr $querier_num \/ 254`
- y=`expr $querier_num % 254 + 1`
- if [ $x -gt 254 ]; then
- tst_resm TINFO "The number of the connection is less than $querier_num"
- break
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
+
+ # Run a multicast join tool
+ ns-mcast_join -f 4 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE > /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
fi
- mcast_addr=${MCAST_ADDR_PREFIX}.${x}.${y}
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-igmp_querier -I $rhost_ifname -m $mcast_addr -s $SRC_ADDR -t $NS_DURATION -r 0 -b
+ # Send IGMP Multicast Address Specific Query from the remote host
+ querier_num=0
+ while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
+ # Define the multicast address
+ x=`expr $querier_num \/ 254`
+ y=`expr $querier_num % 254 + 1`
+ if [ $x -gt 254 ]; then
+ tst_res TINFO "The number of the connection is less than $querier_num"
+ fi
+ mcast_addr=${MCAST_ADDR_PREFIX}.${x}.${y}
- querier_num=`expr $querier_num + 1`
-done
-sleep $NS_DURATION
+ tst_rhost_run -c "ns-igmp_querier -I $rhost_ifname -m $mcast_addr -s $SRC_ADDR -t $NS_DURATION -r 0 -b"
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
+ querier_num=`expr $querier_num + 1`
+ done
-do_cleanup
-tst_resm TPASS "Test is finished successfully."
+ sleep $NS_DURATION
+
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld01 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld01
index 8c09d4897..4c3f31938 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld01
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld01
@@ -42,37 +42,19 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld01
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
+. tst_net.sh
#-----------------------------------------------------------------------
#
@@ -84,13 +66,9 @@ MCAST_ADDR_PREFIX=ff0e:
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
@@ -104,59 +82,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -166,32 +101,25 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of General Query in $NS_DURATION [sec]"
-
-do_setup
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of General Query in $NS_DURATION [sec]"
-# Send MLD General Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -r 0 -t $NS_DURATION' ; echo $?'`
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start MLD querier"
- exit 1
-fi
+ # Send MLD General Query from the remote host
+ tst_rhost_run -s -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -r 0 -t $NS_DURATION"
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld02 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld02
index 17cdae75d..e6b9cec06 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld02
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld02
@@ -43,40 +43,23 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld02
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
# Multicast Address
MCAST_ADDR=ff0e::1 # If you modify this, please refer ns-mcast_join.c
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -87,13 +70,9 @@ MCAST_ADDR=ff0e::1 # If you modify this, please refer ns-mcast_join.c
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
@@ -107,59 +86,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -169,31 +105,25 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
-
-do_setup
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
-# Send MLD Multicast Address Specific Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $MCAST_ADDR -r 0 -t $NS_DURATION' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start MLD querier"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
+ # Send MLD Multicast Address Specific Query from the remote host
+ tst_rhost_run -s -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $MCAST_ADDR -r 0 -t $NS_DURATION"
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld03 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld03
index bac7726a9..5b39b0875 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld03
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld03
@@ -43,34 +43,15 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld03
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
@@ -83,6 +64,8 @@ SRC_ADDR=fec0:100:100:100::1
# Filter Mode
FILTER_MODE="include"
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -93,13 +76,9 @@ FILTER_MODE="include"
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
@@ -113,59 +92,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -175,31 +111,25 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
-do_setup
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining an IPv6 multicast group on a single socket, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n 1 -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-# Send MLD Multicast Address and Source Specific Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $MCAST_ADDR -a $SRC_ADDR -r 0 -t $NS_DURATION' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start MLD querier"
- exit 1
-fi
+ # Send MLD Multicast Address and Source Specific Query from the remote host
+ tst_rhost_run -s -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $MCAST_ADDR -a $SRC_ADDR -r 0 -t $NS_DURATION"
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld04 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld04
index cd56d4b40..75b10b801 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld04
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld04
@@ -42,40 +42,19 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld04
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# Number of the multicast to join
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
+. tst_net.sh
#-----------------------------------------------------------------------
#
@@ -87,16 +66,13 @@ MCAST_ADDR_PREFIX=ff0e:
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
+
#-----------------------------------------------------------------------
#
# Function: do_setup
@@ -107,59 +83,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -169,31 +102,25 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of General Query in $NS_DURATION [sec]"
-
-do_setup
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX >/dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of General Query in $NS_DURATION [sec]"
-# Send MLD General Query from the remote host
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -r 0 -t $NS_DURATION' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start MLD querier"
- exit 1
-fi
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
+ # Send MLD General Query from the remote host
+ tst_rhost_run -s -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -r 0 -t $NS_DURATION"
-killall -SIGHUP ns-mcast_join >/dev/null 2>&1
-tst_resm TPASS "Test is finished successfully."
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld05 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld05
index 84c2ee109..5cae71ed3 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld05
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld05
@@ -43,40 +43,20 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld05
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# Number of the multicast to join
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -87,13 +67,9 @@ MCAST_ADDR_PREFIX=ff0e:
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
@@ -107,59 +83,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -169,41 +102,40 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
-
-do_setup
-
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX > /dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
-
-# Send MLD Multicast Address Specific Query from the remote host
-querier_num=0
-while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
- # Define the multicast address
- if [ $querier_num -gt 65535 ]; then
- tst_resm TINFO "The number of the querier is less than 65535"
- break
- fi
- querier_num_hex=`printf "%x" $querier_num`
- mcast_addr=${MCAST_ADDR_PREFIX}:${querier_num_hex}
-
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $mcast_addr -r 0 -t $NS_DURATION -b
-
- querier_num=`expr $querier_num + 1`
-done
-sleep $NS_DURATION
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-do_cleanup
-tst_resm TPASS "Test is finished successfully."
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
+
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of Multicast Address Specific Query in $NS_DURATION [sec]"
+
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX > /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
+
+ # Send MLD Multicast Address Specific Query from the remote host
+ querier_num=0
+ while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
+ # Define the multicast address
+ if [ $querier_num -gt 65535 ]; then
+ tst_res TINFO "The number of the querier is less than 65535"
+ break
+ fi
+ querier_num_hex=`printf "%x" $querier_num`
+ mcast_addr=${MCAST_ADDR_PREFIX}:${querier_num_hex}
+
+ tst_rhost_run -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $mcast_addr -r 0 -t $NS_DURATION -b"
+
+ querier_num=`expr $querier_num + 1`
+ done
+
+ sleep $NS_DURATION
+
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
diff --git a/testcases/network/stress/multicast/query-flood/mcast6-queryfld06 b/testcases/network/stress/multicast/query-flood/mcast6-queryfld06
index d94a78efe..507037ab0 100644
--- a/testcases/network/stress/multicast/query-flood/mcast6-queryfld06
+++ b/testcases/network/stress/multicast/query-flood/mcast6-queryfld06
@@ -43,37 +43,15 @@
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-queryfld06
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# Number of the multicast to join
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
+TST_TESTFUNC=test_body
+TST_NEEDS_ROOT=1
+TST_IPV6=6
+TST_SETUP=do_setup
+TST_CLEANUP=do_cleanup
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
# Prefix of the Multicast Address
MCAST_ADDR_PREFIX=ff0e:
@@ -83,6 +61,8 @@ SRC_ADDR=fec0:100:100:100::1
# Filter Mode
FILTER_MODE="include"
+. tst_net.sh
+
#-----------------------------------------------------------------------
#
# Function: do_cleanup
@@ -93,16 +73,11 @@ FILTER_MODE="include"
#-----------------------------------------------------------------------
do_cleanup()
{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_join >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-icmpv6_sender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
+ # Make sure to kill the multicast receiver and sender
+ killall -SIGHUP ns-mcast_join >/dev/null 2>&1
+ tst_rhost_run -c "ns-icmpv6_sender >/dev/null 2>&1"
}
-
#-----------------------------------------------------------------------
#
# Function: do_setup
@@ -113,59 +88,16 @@ do_cleanup()
#-----------------------------------------------------------------------
do_setup()
{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
- rhost_linklocal="fe80:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+
+ # Make sure the sysctl values
+ sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to set the sysctl value regarding multicast"
+ fi
+
+ sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
+ sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
@@ -175,39 +107,38 @@ do_setup()
#
#
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
-
-do_setup
-
-# Run a multicast join tool
-ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE > /dev/null
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast joining tool Please check the environment"
- exit 1
-fi
-
-# Send MLD Multicast Address Specific Query from the remote host
-querier_num=0
-while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
- if [ $querier_num -gt 65535 ]; then
- tst_resm TINFO "The number of the querier is less than 65535"
- break
- fi
- querier_num_hex=`printf "%x" $querier_num`
- mcast_addr=${MCAST_ADDR_PREFIX}:${querier_num_hex}
-
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $mcast_addr -a $SRC_ADDR -r 0 -t $NS_DURATION -b
- querier_num=`expr $querier_num + 1`
-done
-sleep $NS_DURATION
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-do_cleanup
-tst_resm TPASS "Test is finished successfully."
+test_body()
+{
+ local lhost_ifname=$(tst_iface lhost ${LINK_NUM})
+ local rhost_ifname=$(tst_iface rhost ${LINK_NUM})
+ local rhost_linklocal=$(tst_ipaddr lhost ${LINK_NUM})
+
+ # Test description
+ tst_res TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of Multicast Address and Source Specific Query in $NS_DURATION [sec]"
+
+ # Run a multicast join tool
+ ns-mcast_join -f 6 -I $lhost_ifname -n $MCASTNUM_NORMAL -p $MCAST_ADDR_PREFIX -s $SRC_ADDR -F $FILTER_MODE > /dev/null
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast joining tool Please check the environment"
+ fi
+
+ # Send MLD Multicast Address Specific Query from the remote host
+ querier_num=0
+ while [ $querier_num -lt $MCASTNUM_NORMAL ]; do
+ if [ $querier_num -gt 65535 ]; then
+ tst_res TINFO "The number of the querier is less than 65535"
+ break
+ fi
+ querier_num_hex=`printf "%x" $querier_num`
+ mcast_addr=${MCAST_ADDR_PREFIX}:${querier_num_hex}
+
+ tst_rhost_run -c "ns-icmpv6_sender -I $rhost_ifname -S $rhost_linklocal -m -D $mcast_addr -a $SRC_ADDR -r 0 -t $NS_DURATION -b"
+ querier_num=`expr $querier_num + 1`
+ done
+
+ sleep $NS_DURATION
+
+ tst_res TPASS "Test is finished successfully."
+}
-exit 0
+tst_run
--
2.25.1
next prev parent reply other threads:[~2020-11-16 12:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 12:46 [LTP] [PATCH 0/3] Convert network stress tests to tst_net.sh Joerg Vehlow
2020-11-16 12:46 ` [LTP] [PATCH 1/3] network/stress/mutlicast/packet-flood: Update " Joerg Vehlow
2020-11-16 19:31 ` Petr Vorel
2020-11-16 12:46 ` Joerg Vehlow [this message]
2020-11-16 12:46 ` [LTP] [PATCH 3/3] network/stress/route: Convert " Joerg Vehlow
2020-11-16 19:42 ` [LTP] [PATCH 0/3] Convert network stress tests " Petr Vorel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116124611.16919-3-lkml@jv-coder.de \
--to=lkml@jv-coder.de \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.