All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 2/3] scsi: make io_timeout configurable
Date: Mon, 16 Nov 2020 19:31:13 +0100	[thread overview]
Message-ID: <20201116183114.55703-3-hare@suse.de> (raw)
In-Reply-To: <20201116183114.55703-1-hare@suse.de>

The current code sets an infinite timeout on SG_IO requests,
causing the guest to stall if the host experiences a frame
loss.
This patch adds an 'io_timeout' parameter for SCSIDevice to
make the SG_IO timeout configurable, and also shortens the
default timeout to 30 seconds to avoid infinite stalls.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 hw/scsi/scsi-disk.c    |  6 ++++--
 hw/scsi/scsi-generic.c | 17 +++++++++++------
 include/hw/scsi/scsi.h |  4 +++-
 3 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index e859534eaf..2959526b52 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -2604,7 +2604,7 @@ static int get_device_type(SCSIDiskState *s)
     cmd[4] = sizeof(buf);
 
     ret = scsi_SG_IO_FROM_DEV(s->qdev.conf.blk, cmd, sizeof(cmd),
-                              buf, sizeof(buf));
+                              buf, sizeof(buf), s->qdev.io_timeout);
     if (ret < 0) {
         return -1;
     }
@@ -2765,7 +2765,7 @@ static BlockAIOCB *scsi_block_do_sgio(SCSIBlockReq *req,
     /* The rest is as in scsi-generic.c.  */
     io_header->mx_sb_len = sizeof(r->req.sense);
     io_header->sbp = r->req.sense;
-    io_header->timeout = UINT_MAX;
+    io_header->timeout = s->qdev.io_timeout * 1000;
     io_header->usr_ptr = r;
     io_header->flags |= SG_FLAG_DIRECT_IO;
 
@@ -3083,6 +3083,8 @@ static Property scsi_block_properties[] = {
                        DEFAULT_MAX_IO_SIZE),
     DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version,
                       -1),
+    DEFINE_PROP_UINT32("io_timeout", SCSIDiskState, qdev.io_timeout,
+                       DEFAULT_IO_TIMEOUT),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index 2cb23ca891..e07924b3d7 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -114,6 +114,8 @@ static int execute_command(BlockBackend *blk,
                            SCSIGenericReq *r, int direction,
                            BlockCompletionFunc *complete)
 {
+    SCSIDevice *s = r->req.dev;
+
     r->io_header.interface_id = 'S';
     r->io_header.dxfer_direction = direction;
     r->io_header.dxferp = r->buf;
@@ -122,7 +124,7 @@ static int execute_command(BlockBackend *blk,
     r->io_header.cmd_len = r->req.cmd.len;
     r->io_header.mx_sb_len = sizeof(r->req.sense);
     r->io_header.sbp = r->req.sense;
-    r->io_header.timeout = MAX_UINT;
+    r->io_header.timeout = s->io_timeout * 1000;
     r->io_header.usr_ptr = r;
     r->io_header.flags |= SG_FLAG_DIRECT_IO;
 
@@ -505,7 +507,7 @@ static int read_naa_id(const uint8_t *p, uint64_t *p_wwn)
 }
 
 int scsi_SG_IO_FROM_DEV(BlockBackend *blk, uint8_t *cmd, uint8_t cmd_size,
-                        uint8_t *buf, uint8_t buf_size)
+                        uint8_t *buf, uint8_t buf_size, uint32_t timeout)
 {
     sg_io_hdr_t io_header;
     uint8_t sensebuf[8];
@@ -520,7 +522,7 @@ int scsi_SG_IO_FROM_DEV(BlockBackend *blk, uint8_t *cmd, uint8_t cmd_size,
     io_header.cmd_len = cmd_size;
     io_header.mx_sb_len = sizeof(sensebuf);
     io_header.sbp = sensebuf;
-    io_header.timeout = 6000; /* XXX */
+    io_header.timeout = timeout * 1000;
 
     ret = blk_ioctl(blk, SG_IO, &io_header);
     if (ret < 0 || io_header.driver_status || io_header.host_status) {
@@ -550,7 +552,7 @@ static void scsi_generic_set_vpd_bl_emulation(SCSIDevice *s)
     cmd[4] = sizeof(buf);
 
     ret = scsi_SG_IO_FROM_DEV(s->conf.blk, cmd, sizeof(cmd),
-                              buf, sizeof(buf));
+                              buf, sizeof(buf), s->io_timeout);
     if (ret < 0) {
         /*
          * Do not assume anything if we can't retrieve the
@@ -586,7 +588,7 @@ static void scsi_generic_read_device_identification(SCSIDevice *s)
     cmd[4] = sizeof(buf);
 
     ret = scsi_SG_IO_FROM_DEV(s->conf.blk, cmd, sizeof(cmd),
-                              buf, sizeof(buf));
+                              buf, sizeof(buf), s->io_timeout);
     if (ret < 0) {
         return;
     }
@@ -637,7 +639,7 @@ static int get_stream_blocksize(BlockBackend *blk)
     cmd[0] = MODE_SENSE;
     cmd[4] = sizeof(buf);
 
-    ret = scsi_SG_IO_FROM_DEV(blk, cmd, sizeof(cmd), buf, sizeof(buf));
+    ret = scsi_SG_IO_FROM_DEV(blk, cmd, sizeof(cmd), buf, sizeof(buf), 6);
     if (ret < 0) {
         return -1;
     }
@@ -727,6 +729,7 @@ static void scsi_generic_realize(SCSIDevice *s, Error **errp)
 
     /* Only used by scsi-block, but initialize it nevertheless to be clean.  */
     s->default_scsi_version = -1;
+    s->io_timeout = DEFAULT_IO_TIMEOUT;
     scsi_generic_read_device_inquiry(s);
 }
 
@@ -750,6 +753,8 @@ static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
 static Property scsi_generic_properties[] = {
     DEFINE_PROP_DRIVE("drive", SCSIDevice, conf.blk),
     DEFINE_PROP_BOOL("share-rw", SCSIDevice, conf.share_rw, false),
+    DEFINE_PROP_UINT32("io_timeout", SCSIDevice, io_timeout,
+                       DEFAULT_IO_TIMEOUT),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h
index 7a55cdbd74..21a6249743 100644
--- a/include/hw/scsi/scsi.h
+++ b/include/hw/scsi/scsi.h
@@ -18,6 +18,7 @@ typedef struct SCSIReqOps SCSIReqOps;
 
 #define SCSI_SENSE_BUF_SIZE_OLD 96
 #define SCSI_SENSE_BUF_SIZE 252
+#define DEFAULT_IO_TIMEOUT 30
 
 struct SCSIRequest {
     SCSIBus           *bus;
@@ -84,6 +85,7 @@ struct SCSIDevice
     uint64_t port_wwn;
     int scsi_version;
     int default_scsi_version;
+    uint32_t io_timeout;
     bool needs_vpd_bl_emulation;
     bool hba_supports_iothread;
 };
@@ -188,7 +190,7 @@ void scsi_device_unit_attention_reported(SCSIDevice *dev);
 void scsi_generic_read_device_inquiry(SCSIDevice *dev);
 int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
 int scsi_SG_IO_FROM_DEV(BlockBackend *blk, uint8_t *cmd, uint8_t cmd_size,
-                        uint8_t *buf, uint8_t buf_size);
+                        uint8_t *buf, uint8_t buf_size, uint32_t timeout);
 SCSIDevice *scsi_device_find(SCSIBus *bus, int channel, int target, int lun);
 
 /* scsi-generic.c. */
-- 
2.16.4



  parent reply	other threads:[~2020-11-16 18:51 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-16 18:31 [PATCH 0/3] scsi: infinite guest hangs with scsi-disk Hannes Reinecke
2020-11-16 18:31 ` [PATCH 1/3] virtio-scsi: trace events Hannes Reinecke
2020-11-16 18:31 ` Hannes Reinecke [this message]
2021-09-20 18:56   ` [PATCH 2/3] scsi: make io_timeout configurable Paolo Bonzini
2021-09-21  5:39     ` Hannes Reinecke
2021-09-21  7:25       ` Paolo Bonzini
2021-09-22 15:47   ` Philippe Mathieu-Daudé
2021-09-23  6:03     ` Hannes Reinecke
2021-09-23  7:19     ` Paolo Bonzini
2020-11-16 18:31 ` [PATCH 3/3] scsi: add tracing for SG_IO commands Hannes Reinecke
2020-11-16 19:09 ` [PATCH 0/3] scsi: infinite guest hangs with scsi-disk no-reply
2020-12-17 13:49 ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201116183114.55703-3-hare@suse.de \
    --to=hare@suse.de \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.