From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v5 07/16] phy: tegra: xusb: Add sleepwalk and suspend/resume
Date: Thu, 19 Nov 2020 16:53:56 +0800 [thread overview]
Message-ID: <20201119085405.556138-8-jckuo@nvidia.com> (raw)
In-Reply-To: <20201119085405.556138-1-jckuo@nvidia.com>
This commit adds sleepwalk/wake and suspend/resume interfaces
to Tegra XUSB PHY driver.
Tegra XUSB host controller driver makes use of sleepwalk functions
to enable/disable sleepwalk circuit which is in always-on partition
and can respond to USB resume signals when controller is not powered.
Sleepwalk can be enabled/disabled for any USB UPHY individually.
- tegra_xusb_padctl_enable_phy_sleepwalk()
- tegra_xusb_padctl_disable_phy_sleepwalk()
Tegra XUSB host controller driver makes use of wake functions to
enable/disable/query wake circuit which is in always-on partition
can wake system up when USB resume happens.
Wake circuit can be enabled/disabled for any USB PHY individually.
- tegra_xusb_padctl_enable_phy_wake()
- tegra_xusb_padctl_disable_phy_wake()
- tegra_xusb_padctl_remote_wake_detected()
This commit also adds two system suspend stubs that can be used to
save and restore XUSB PADCTL context during system suspend and
resume.
- tegra_xusb_padctl_suspend_noirq()
- tegra_xusb_padctl_resume_noirq()
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
v5:
no change
v4:
move sleepwalk/wake stubs from 'struct tegra_xusb_padctl_ops' to
'struct tegra_xusb_lane_ops'
v3:
commit message improvement, no change in code
drivers/phy/tegra/xusb.c | 82 ++++++++++++++++++++++++++++++++++
drivers/phy/tegra/xusb.h | 8 ++++
include/linux/phy/tegra/xusb.h | 10 ++++-
3 files changed, 99 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index e81ac7a088e9..0fdee9ab64da 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -1275,10 +1275,36 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
return err;
}
+static int tegra_xusb_padctl_suspend_noirq(struct device *dev)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+ if (padctl->soc && padctl->soc->ops && padctl->soc->ops->suspend_noirq)
+ return padctl->soc->ops->suspend_noirq(padctl);
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_resume_noirq(struct device *dev)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+
+ if (padctl->soc && padctl->soc->ops && padctl->soc->ops->resume_noirq)
+ return padctl->soc->ops->resume_noirq(padctl);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tegra_xusb_padctl_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_xusb_padctl_suspend_noirq,
+ tegra_xusb_padctl_resume_noirq)
+};
+
static struct platform_driver tegra_xusb_padctl_driver = {
.driver = {
.name = "tegra-xusb-padctl",
.of_match_table = tegra_xusb_padctl_of_match,
+ .pm = &tegra_xusb_padctl_pm_ops,
},
.probe = tegra_xusb_padctl_probe,
.remove = tegra_xusb_padctl_remove,
@@ -1345,6 +1371,62 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
}
EXPORT_SYMBOL_GPL(tegra_xusb_padctl_hsic_set_idle);
+int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy,
+ enum usb_device_speed speed)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->enable_phy_sleepwalk)
+ return lane->pad->ops->enable_phy_sleepwalk(lane, speed);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_sleepwalk);
+
+int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->disable_phy_sleepwalk)
+ return lane->pad->ops->disable_phy_sleepwalk(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_sleepwalk);
+
+int tegra_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->enable_phy_wake)
+ return lane->pad->ops->enable_phy_wake(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_enable_phy_wake);
+
+int tegra_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->disable_phy_wake)
+ return lane->pad->ops->disable_phy_wake(lane);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_disable_phy_wake);
+
+bool tegra_xusb_padctl_remote_wake_detected(struct tegra_xusb_padctl *padctl, struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+
+ if (lane->pad->ops->remote_wake_detected)
+ return lane->pad->ops->remote_wake_detected(lane);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_remote_wake_detected);
+
int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
unsigned int port, bool enable)
{
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index e789d5ff4eb8..034f7a2c28d6 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -11,6 +11,7 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
@@ -132,6 +133,11 @@ struct tegra_xusb_lane_ops {
void (*remove)(struct tegra_xusb_lane *lane);
void (*iddq_enable)(struct tegra_xusb_lane *lane);
void (*iddq_disable)(struct tegra_xusb_lane *lane);
+ int (*enable_phy_sleepwalk)(struct tegra_xusb_lane *lane, enum usb_device_speed speed);
+ int (*disable_phy_sleepwalk)(struct tegra_xusb_lane *lane);
+ int (*enable_phy_wake)(struct tegra_xusb_lane *lane);
+ int (*disable_phy_wake)(struct tegra_xusb_lane *lane);
+ bool (*remote_wake_detected)(struct tegra_xusb_lane *lane);
};
bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
@@ -396,6 +402,8 @@ struct tegra_xusb_padctl_ops {
const struct tegra_xusb_padctl_soc *soc);
void (*remove)(struct tegra_xusb_padctl *padctl);
+ int (*suspend_noirq)(struct tegra_xusb_padctl *padctl);
+ int (*resume_noirq)(struct tegra_xusb_padctl *padctl);
int (*usb3_save_context)(struct tegra_xusb_padctl *padctl,
unsigned int index);
int (*hsic_set_idle)(struct tegra_xusb_padctl *padctl,
diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
index 71d956935405..3a35e74cdc61 100644
--- a/include/linux/phy/tegra/xusb.h
+++ b/include/linux/phy/tegra/xusb.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef PHY_TEGRA_XUSB_H
@@ -8,6 +8,7 @@
struct tegra_xusb_padctl;
struct device;
+enum usb_device_speed;
struct tegra_xusb_padctl *tegra_xusb_padctl_get(struct device *dev);
void tegra_xusb_padctl_put(struct tegra_xusb_padctl *padctl);
@@ -23,4 +24,11 @@ int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl,
unsigned int port);
+int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy,
+ enum usb_device_speed speed);
+int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy);
+int tegra_xusb_padctl_enable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy);
+int tegra_xusb_padctl_disable_phy_wake(struct tegra_xusb_padctl *padctl, struct phy *phy);
+bool tegra_xusb_padctl_remote_wake_detected(struct tegra_xusb_padctl *padctl, struct phy *phy);
+
#endif /* PHY_TEGRA_XUSB_H */
--
2.25.1
next prev parent reply other threads:[~2020-11-19 8:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-19 8:53 [PATCH v5 00/16] Tegra XHCI controller ELPG support JC Kuo
2020-11-19 8:53 ` [PATCH v5 01/16] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-11-19 8:53 ` [PATCH v5 02/16] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2020-11-19 8:53 ` [PATCH v5 03/16] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-11-19 8:53 ` [PATCH v5 04/16] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2020-11-19 8:53 ` [PATCH v5 05/16] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2020-11-19 8:53 ` [PATCH v5 06/16] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-11-19 8:53 ` JC Kuo [this message]
2020-11-19 8:53 ` [PATCH v5 08/16] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2020-11-19 8:53 ` [PATCH v5 09/16] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-11-19 8:53 ` [PATCH v5 10/16] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2020-11-30 22:03 ` Rob Herring
2020-11-19 8:54 ` [PATCH v5 11/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-11-19 8:54 ` [PATCH v5 12/16] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2020-11-19 8:54 ` [PATCH v5 13/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-11-19 8:54 ` [PATCH v5 14/16] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-11-19 8:54 ` [PATCH v5 15/16] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-11-19 8:54 ` [PATCH v5 16/16] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201119085405.556138-8-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.