Re: [PATCH v5 3/5] dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Tue 27 Oct 12:00 CDT 2020, Manivannan Sadhasivam wrote:

> Document the PCIe DT bindings for SM8250 SoC. The PCIe IP is similar to
> the one used on SDM845, hence just add the compatible along with the
> optional "atu" register region.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 02bc81bb8b2d..3b55310390a0 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -13,6 +13,7 @@
>  			- "qcom,pcie-ipq8074" for ipq8074
>  			- "qcom,pcie-qcs404" for qcs404
>  			- "qcom,pcie-sdm845" for sdm845
> +			- "qcom,pcie-sm8250" for sm8250
>  
>  - reg:
>  	Usage: required
> @@ -27,6 +28,7 @@
>  			- "dbi"	   DesignWare PCIe registers
>  			- "elbi"   External local bus interface registers
>  			- "config" PCIe configuration space
> +			- "atu"    ATU address space (optional)
>  
>  - device_type:
>  	Usage: required
> @@ -131,7 +133,7 @@
>  			- "slave_bus"	AXI Slave clock
>  
>  -clock-names:
> -	Usage: required for sdm845
> +	Usage: required for sdm845 and sm8250
>  	Value type: <stringlist>
>  	Definition: Should contain the following entries
>  			- "aux"		Auxiliary clock
> @@ -206,7 +208,7 @@
>  			- "ahb"			AHB reset
>  
>  - reset-names:
> -	Usage: required for sdm845
> +	Usage: required for sdm845 and sm8250
>  	Value type: <stringlist>
>  	Definition: Should contain the following entries
>  			- "pci"			PCIe core reset
> -- 
> 2.17.1
>