All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Martin Jücker" <martin.juecker@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: switch atmel mxt reset gpio to active low
Date: Sun, 22 Nov 2020 12:38:39 +0100	[thread overview]
Message-ID: <20201122113839.GA7781@kozik-lap> (raw)
In-Reply-To: <20201120160053.18942-1-martin.juecker@gmail.com>

On Fri, Nov 20, 2020 at 05:00:54PM +0100, Martin Jücker wrote:
> The reset gpio logic of the atmel driver was changed to be active low at
> around the same time this device tree was accepted into the kernel.
> Adjust the configuration so that the touchscreen is in a usable state.
> 
> Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
> ---
>  arch/arm/boot/dts/exynos4412-p4note.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Please use proper subsystem prefix in the title, so "ARM: dts: exynos:".
Also capitalize names (Atmel) and acronyms (GPIO, not
gpio).

Thanks, applied.

Best regards,
Krzysztof


      reply	other threads:[~2020-11-22 11:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20 16:00 [PATCH] ARM: dts: switch atmel mxt reset gpio to active low Martin Jücker
2020-11-22 11:38 ` Krzysztof Kozlowski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201122113839.GA7781@kozik-lap \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=martin.juecker@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.