All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Nick Alcock <nick.alcock@oracle.com>
Cc: linux-xfs <linux-xfs@vger.kernel.org>
Subject: Re: XFS: corruption detected in 5.9.10, upgrading from 5.9.6: (partial) panic log
Date: Sun, 22 Nov 2020 11:37:11 -0800	[thread overview]
Message-ID: <20201122193711.GA7880@magnolia> (raw)
In-Reply-To: <87lfetme3f.fsf@esperi.org.uk>

On Sun, Nov 22, 2020 at 06:38:28PM +0000, Nick Alcock wrote:
> So I just tried to reboot my x86 server box from 5.9.6 to 5.9.10 and my

Sorry about that, there was a bad patch in -rc4 that got sucked into
5.9.9 because it had a fixes tag.  The revert is already upstream:

https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git/commit/?id=eb8409071a1d47e3593cfe077107ac46853182ab

--D

> system oopsed with an xfs fs corruption message when I kicked up
> Chromium on another machine which mounted $HOME from the server box (it
> panicked without logging anything, because the corruption was detected
> on the rootfs, and it is also the loghost). A subsequent reboot died
> instantly as soon as it tried to mount root, but the next one got all
> the way to starting Chromium before dying again the same way.
> 
> Rebooting back into 5.9.6 causes everything to work fine again, no
> reports of corruption and starting Chromium works.
> 
> This fs has rmapbt and reflinks enabled, on a filesystem originally
> created by xfsprogs 4.10.0, but I have never knowingly used them under
> the Chromium config dirs (or, actually, under that user's $HOME at all).
> I've used them extensively elsewhere on the fs though. The FS is sitting
> above a libata -> md-raid6 -> bcache stack. (It is barely possible that
> bcache is at fault, but bcache has seen no changes since 5.9.6 so I
> doubt it.)
> 
> The relevant bits of the log I could capture -- no console scrollback
> these days, of course :( and it was a panic anyway so the top is just
> lost -- is in a photo here:
> 
>   <http://www.esperi.org.uk/~nix/temporary/xfs-crash.jpg>
> 
> The mkfs line used to create this fs was:
> 
> mkfs.xfs -m rmapbt=1,reflink=1 -d agcount=17,sunit=$((128*8)),swidth=$((384*8)) -l logdev=/dev/sde3,size=521728b -i sparse=1,maxpct=25 /dev/main/root
> 
> (/dev/sde3 is an SSD which also hosts the bcache and RAID journal,
> though this RAID device is not journalled, and is operating fine.)
> 
> I am not using a realtime device.
> 
> I have *not* yet run xfs_repair, but just rebooted back into the old
> kernel, since everything worked there: I'll run xfs_repair over the fs
> if you think it wise to do so, but right now I have a state which
> crashes on one kernel and works on another one, which seems useful to
> not try to fix in case you have some use for it.
> 
> Since everything is working fine in 5.9.6 and there were XFS changes
> after that, I'm hypothesising that this is probably a bug in the
> post-5.9.6 changes rather than anything xfs_repair should be trying to
> fix. But I really don't know :)
> 
> (I can't help but notice that all these post-5.9.6 XFS changes were
> sucked in by Sasha's magic regression-hunting stable-tree AI, which I
> thought wasn't meant to happen -- but I've not been watching closely,
> and if you changed your minds after the LWN article went in I won't have
> seen it.)

  reply	other threads:[~2020-11-22 19:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-22 18:38 XFS: corruption detected in 5.9.10, upgrading from 5.9.6: (partial) panic log Nick Alcock
2020-11-22 19:37 ` Darrick J. Wong [this message]
2020-11-22 20:14   ` Nick Alcock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201122193711.GA7880@magnolia \
    --to=darrick.wong@oracle.com \
    --cc=linux-xfs@vger.kernel.org \
    --cc=nick.alcock@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.