From: Luis Henriques <lhenriques@suse.de>
To: Eryu Guan <guan@eryu.me>, Jeff Layton <jlayton@kernel.org>
Cc: fstests@vger.kernel.org, ceph-devel@vger.kernel.org,
Luis Henriques <lhenriques@suse.de>
Subject: [PATCH v3] ceph: add a new test for cross quota realms renames
Date: Fri, 27 Nov 2020 12:37:42 +0000 [thread overview]
Message-ID: <20201127123742.561-1-lhenriques@suse.de> (raw)
For the moment cross quota realms renames has been disabled in CephFS
after a bug has been found while renaming files created and truncated.
This allowed clients to easily circumvent quotas.
Link: https://tracker.ceph.com/issues/48203
Signed-off-by: Luis Henriques <lhenriques@suse.de>
---
v3: added file caps check, as suggested by Jeff Layton.
This required commit "ceph: add ceph.caps vxattr" (not yet in mainline),
which made me also introduce function _require_ceph_vxattr_caps.
v2: implemented Eryu review comments:
- Added _require_test_program "rename"
- Use _fail instead of _fatal
common/ceph | 7 +++
tests/ceph/004 | 119 +++++++++++++++++++++++++++++++++++++++++++++
tests/ceph/004.out | 2 +
tests/ceph/group | 1 +
4 files changed, 129 insertions(+)
create mode 100755 tests/ceph/004
create mode 100644 tests/ceph/004.out
diff --git a/common/ceph b/common/ceph
index f80209f98b23..ca756dda8dd3 100644
--- a/common/ceph
+++ b/common/ceph
@@ -21,3 +21,10 @@ _ceph_create_file_layout()
-v "stripe_unit=$objsz stripe_count=1 object_size=$objsz" \
$fname
}
+
+# this test requires to access file capabilities through vxattr 'ceph.caps'.
+_require_ceph_vxattr_caps()
+{
+ $GETFATTR_PROG -n "ceph.caps" $TEST_DIR >/dev/null 2>&1 \
+ || _notrun "ceph.caps vxattr not supported"
+}
diff --git a/tests/ceph/004 b/tests/ceph/004
new file mode 100755
index 000000000000..1de19b39acb5
--- /dev/null
+++ b/tests/ceph/004
@@ -0,0 +1,119 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FS QA Test 004
+#
+# Tests a bug fix found in cephfs quotas handling. Here's a simplified testcase
+# that *should* fail:
+#
+# mkdir files limit
+# truncate files/file -s 10G
+# setfattr limit -n ceph.quota.max_bytes -v 1000000
+# mv files limit/
+#
+# Because we're creating a new file and truncating it, we have Fx caps and thus
+# the truncate operation will be cached. This prevents the MDSs from updating
+# the quota realms and thus the client will allow the above rename(2) to happen.
+#
+# The bug resulted in dropping support for cross quota-realms renames, reverting
+# kernel commit dffdcd71458e ("ceph: allow rename operation under different
+# quota realms").
+#
+# So, the above test will now fail with a -EXDEV or, in the future (when we have
+# a proper fix), with -EDQUOT.
+#
+# This bug was tracker here:
+#
+# https://tracker.ceph.com/issues/48203
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+_supported_fs ceph
+_require_attrs
+_require_test
+_require_test_program "rename"
+_require_ceph_vxattr_caps # we need to get file capabilities
+
+workdir=$TEST_DIR/test-$seq
+
+orig1=$workdir/orig1
+orig2=$workdir/orig2
+file1=$orig1/file
+file2=$orig2/file
+dest=$workdir/dest
+
+rm -rf $workdir
+mkdir $workdir
+mkdir $orig1 $orig2 $dest
+
+# get only the hexadecimal value of the ceph.caps vxattr, which has the
+# following format:
+# ceph.caps="pAsLsXsFscr/0xd55"
+get_ceph_caps()
+{
+ $GETFATTR_PROG --only-values -n "ceph.caps" $1 2>/dev/null \
+ | cut -d / -f2
+}
+
+# check that a file has cephfs capabilities 'Fs'
+check_Fs_caps()
+{
+ caps=`get_ceph_caps $1`
+ # Fs cap is bit (1 << 8)
+ Fs=$((1 << 8))
+ res=$(($caps & $Fs))
+ if [ $res -ne $Fs ]; then
+ _fail "File $1 doesn't have Fs caps ($caps)"
+ fi
+}
+
+# set quota to 1m
+$SETFATTR_PROG -n ceph.quota.max_bytes -v 1000000 $dest
+# set quota to 20g
+$SETFATTR_PROG -n ceph.quota.max_bytes -v 20000000000 $orig2
+
+#
+# The following 2 testcases shall fail with either -EXDEV or -EDQUOT
+#
+
+# from 'root' realm to $dest realm
+$XFS_IO_PROG -f -c "truncate 10G" $file1
+check_Fs_caps $file1
+$here/src/rename $orig1 $dest/new1 >> $seqres.full 2>&1
+[ $? -ne 1 ] && _fail "cross quota realms rename succeeded"
+
+# from $orig2 realm to $dest realm
+$XFS_IO_PROG -f -c "truncate 10G" $file2
+check_Fs_caps $file2
+$here/src/rename $orig2 $dest/new2 >> $seqres.full 2>&1
+[ $? -ne 1 ] && _fail "cross quota realms rename succeeded"
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/ceph/004.out b/tests/ceph/004.out
new file mode 100644
index 000000000000..af8614ae45ac
--- /dev/null
+++ b/tests/ceph/004.out
@@ -0,0 +1,2 @@
+QA output created by 004
+Silence is golden
diff --git a/tests/ceph/group b/tests/ceph/group
index adbf61547766..47903d21966c 100644
--- a/tests/ceph/group
+++ b/tests/ceph/group
@@ -1,3 +1,4 @@
001 auto quick copy
002 auto quick copy
003 auto quick copy
+004 auto quick quota
next reply other threads:[~2020-11-27 12:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 12:37 Luis Henriques [this message]
2020-11-29 10:16 ` [PATCH v3] ceph: add a new test for cross quota realms renames Eryu Guan
2020-11-29 14:42 ` Luis Henriques
2020-11-29 15:23 ` Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201127123742.561-1-lhenriques@suse.de \
--to=lhenriques@suse.de \
--cc=ceph-devel@vger.kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guan@eryu.me \
--cc=jlayton@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.