Re: [PATCH v2 1/3] dt-bindings: media: i2c: Add OV8865 bindings documentation

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Paul,

On Fri, Nov 13, 2020 at 06:03:42PM +0100, Paul Kocialkowski wrote:
> This introduces YAML bindings documentation for the OV8865
> image sensor.
> 
> Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
>  .../bindings/media/i2c/ovti,ov8865.yaml       | 120 ++++++++++++++++++
>  1 file changed, 120 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> new file mode 100644
> index 000000000000..47af90d6ebea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV8865 Image Sensor Device Tree Bindings
> +
> +maintainers:
> +  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> +
> +properties:
> +  compatible:
> +    const: ovti,ov8865
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: EXTCLK Clock
> +
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-rates:
> +    maxItems: 1
> +
> +  dvdd-supply:
> +    description: Digital Domain Power Supply
> +
> +  avdd-supply:
> +    description: Analog Domain Power Supply (internal AVDD is used if missing)
> +
> +  dovdd-supply:
> +    description: I/O Domain Power Supply
> +
> +  powerdown-gpios:
> +    maxItems: 1
> +    description: Power Down Pin GPIO Control (active low)
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Reset Pin GPIO Control (active low)
> +
> +  port:
> +    type: object
> +    description: MIPI CSI-2 transmitter port
> +
> +    properties:
> +      endpoint:
> +        type: object
> +
> +        properties:
> +          remote-endpoint: true
> +
> +          data-lanes:
> +            minItems: 1
> +            maxItems: 4
> +
> +        required:
> +          - bus-type
> +          - data-lanes
> +          - remote-endpoint

link-frequencies seems to be still missing here (same with the example).

-- 
Sakari Ailus