All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table
Date: Sun, 29 Nov 2020 13:03:02 +0000	[thread overview]
Message-ID: <20201129130302.62f4f38f@archlinux> (raw)
In-Reply-To: <c43286938b2fe03ab3abdb5fc095ea6b950abcb1.1606557946.git.lorenzo@kernel.org>

On Sat, 28 Nov 2020 11:08:01 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Shrink st_lsm6dsx_sensor_settings table size moving wai address info in
> id array and remove duplicated code
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied.

thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |   3 +-
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 451 ++-----------------
>  2 files changed, 29 insertions(+), 425 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 4b4ec39d4400..b81da6053b3c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -266,7 +266,6 @@ struct st_lsm6dsx_ext_dev_settings {
>  
>  /**
>   * struct st_lsm6dsx_settings - ST IMU sensor settings
> - * @wai: Sensor WhoAmI default value.
>   * @reset: register address for reset.
>   * @boot: register address for boot.
>   * @bdu: register address for Block Data Update.
> @@ -284,7 +283,6 @@ struct st_lsm6dsx_ext_dev_settings {
>   * @shub_settings: i2c controller related settings.
>   */
>  struct st_lsm6dsx_settings {
> -	u8 wai;
>  	struct st_lsm6dsx_reg reset;
>  	struct st_lsm6dsx_reg boot;
>  	struct st_lsm6dsx_reg bdu;
> @@ -292,6 +290,7 @@ struct st_lsm6dsx_settings {
>  	struct {
>  		enum st_lsm6dsx_hw_id hw_id;
>  		const char *name;
> +		u8 wai;
>  	} id[ST_LSM6DSX_MAX_ID];
>  	struct {
>  		const struct iio_chan_spec *chan;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index a73c41dea5fc..c05910fa0de6 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -90,7 +90,6 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
>  
>  static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  	{
> -		.wai = 0x68,
>  		.reset = {
>  			.addr = 0x22,
>  			.mask = BIT(0),
> @@ -108,9 +107,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			{
>  				.hw_id = ST_LSM9DS1_ID,
>  				.name = ST_LSM9DS1_DEV_NAME,
> +				.wai = 0x68,
>  			}, {
>  				.hw_id = ST_LSM6DS0_ID,
>  				.name = ST_LSM6DS0_DEV_NAME,
> +				.wai = 0x68,
>  			},
>  		},
>  		.channels = {
> @@ -195,7 +196,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		},
>  	},
>  	{
> -		.wai = 0x69,
>  		.reset = {
>  			.addr = 0x12,
>  			.mask = BIT(0),
> @@ -213,6 +213,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			{
>  				.hw_id = ST_LSM6DS3_ID,
>  				.name = ST_LSM6DS3_DEV_NAME,
> +				.wai = 0x69,
>  			},
>  		},
>  		.channels = {
> @@ -361,7 +362,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		},
>  	},
>  	{
> -		.wai = 0x69,
>  		.reset = {
>  			.addr = 0x12,
>  			.mask = BIT(0),
> @@ -379,6 +379,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			{
>  				.hw_id = ST_LSM6DS3H_ID,
>  				.name = ST_LSM6DS3H_DEV_NAME,
> +				.wai = 0x69,
>  			},
>  		},
>  		.channels = {
> @@ -527,7 +528,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		},
>  	},
>  	{
> -		.wai = 0x6a,
>  		.reset = {
>  			.addr = 0x12,
>  			.mask = BIT(0),
> @@ -545,15 +545,19 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			{
>  				.hw_id = ST_LSM6DSL_ID,
>  				.name = ST_LSM6DSL_DEV_NAME,
> +				.wai = 0x6a,
>  			}, {
>  				.hw_id = ST_LSM6DSM_ID,
>  				.name = ST_LSM6DSM_DEV_NAME,
> +				.wai = 0x6a,
>  			}, {
>  				.hw_id = ST_ISM330DLC_ID,
>  				.name = ST_ISM330DLC_DEV_NAME,
> +				.wai = 0x6a,
>  			}, {
>  				.hw_id = ST_LSM6DS3TRC_ID,
>  				.name = ST_LSM6DS3TRC_DEV_NAME,
> +				.wai = 0x6a,
>  			},
>  		},
>  		.channels = {
> @@ -743,7 +747,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		},
>  	},
>  	{
> -		.wai = 0x6c,
>  		.reset = {
>  			.addr = 0x12,
>  			.mask = BIT(0),
> @@ -759,11 +762,29 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		.max_fifo_size = 512,
>  		.id = {
>  			{
> +				.hw_id = ST_LSM6DSR_ID,
> +				.name = ST_LSM6DSR_DEV_NAME,
> +				.wai = 0x6b,
> +			}, {
> +				.hw_id = ST_ISM330DHCX_ID,
> +				.name = ST_ISM330DHCX_DEV_NAME,
> +				.wai = 0x6b,
> +			}, {
> +				.hw_id = ST_LSM6DSRX_ID,
> +				.name = ST_LSM6DSRX_DEV_NAME,
> +				.wai = 0x6b,
> +			}, {
>  				.hw_id = ST_LSM6DSO_ID,
>  				.name = ST_LSM6DSO_DEV_NAME,
> +				.wai = 0x6c,
>  			}, {
>  				.hw_id = ST_LSM6DSOX_ID,
>  				.name = ST_LSM6DSOX_DEV_NAME,
> +				.wai = 0x6c,
> +			}, {
> +				.hw_id = ST_LSM6DST_ID,
> +				.name = ST_LSM6DST_DEV_NAME,
> +				.wai = 0x6d,
>  			},
>  		},
>  		.channels = {
> @@ -951,7 +972,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  		},
>  	},
>  	{
> -		.wai = 0x6b,
>  		.reset = {
>  			.addr = 0x12,
>  			.mask = BIT(0),
> @@ -969,6 +989,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			{
>  				.hw_id = ST_ASM330LHH_ID,
>  				.name = ST_ASM330LHH_DEV_NAME,
> +				.wai = 0x6b,
>  			},
>  		},
>  		.channels = {
> @@ -1123,422 +1144,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  			.wakeup_src_x_mask = BIT(2),
>  		},
>  	},
> -	{
> -		.wai = 0x6b,
> -		.reset = {
> -			.addr = 0x12,
> -			.mask = BIT(0),
> -		},
> -		.boot = {
> -			.addr = 0x12,
> -			.mask = BIT(7),
> -		},
> -		.bdu = {
> -			.addr = 0x12,
> -			.mask = BIT(6),
> -		},
> -		.max_fifo_size = 512,
> -		.id = {
> -			{
> -				.hw_id = ST_LSM6DSR_ID,
> -				.name = ST_LSM6DSR_DEV_NAME,
> -			}, {
> -				.hw_id = ST_ISM330DHCX_ID,
> -				.name = ST_ISM330DHCX_DEV_NAME,
> -			}, {
> -				.hw_id = ST_LSM6DSRX_ID,
> -				.name = ST_LSM6DSRX_DEV_NAME,
> -			},
> -		},
> -		.channels = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.chan = st_lsm6dsx_acc_channels,
> -				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.chan = st_lsm6dsx_gyro_channels,
> -				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
> -			},
> -		},
> -		.drdy_mask = {
> -			.addr = 0x13,
> -			.mask = BIT(3),
> -		},
> -		.odr_table = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.reg = {
> -					.addr = 0x10,
> -					.mask = GENMASK(7, 4),
> -				},
> -				.odr_avl[0] = {  12500, 0x01 },
> -				.odr_avl[1] = {  26000, 0x02 },
> -				.odr_avl[2] = {  52000, 0x03 },
> -				.odr_avl[3] = { 104000, 0x04 },
> -				.odr_avl[4] = { 208000, 0x05 },
> -				.odr_avl[5] = { 416000, 0x06 },
> -				.odr_avl[6] = { 833000, 0x07 },
> -				.odr_len = 7,
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.reg = {
> -					.addr = 0x11,
> -					.mask = GENMASK(7, 4),
> -				},
> -				.odr_avl[0] = {  12500, 0x01 },
> -				.odr_avl[1] = {  26000, 0x02 },
> -				.odr_avl[2] = {  52000, 0x03 },
> -				.odr_avl[3] = { 104000, 0x04 },
> -				.odr_avl[4] = { 208000, 0x05 },
> -				.odr_avl[5] = { 416000, 0x06 },
> -				.odr_avl[6] = { 833000, 0x07 },
> -				.odr_len = 7,
> -			},
> -		},
> -		.fs_table = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.reg = {
> -					.addr = 0x10,
> -					.mask = GENMASK(3, 2),
> -				},
> -				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
> -				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
> -				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
> -				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
> -				.fs_len = 4,
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.reg = {
> -					.addr = 0x11,
> -					.mask = GENMASK(3, 2),
> -				},
> -				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
> -				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
> -				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
> -				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
> -				.fs_len = 4,
> -			},
> -		},
> -		.irq_config = {
> -			.irq1 = {
> -				.addr = 0x0d,
> -				.mask = BIT(3),
> -			},
> -			.irq2 = {
> -				.addr = 0x0e,
> -				.mask = BIT(3),
> -			},
> -			.lir = {
> -				.addr = 0x56,
> -				.mask = BIT(0),
> -			},
> -			.clear_on_read = {
> -				.addr = 0x56,
> -				.mask = BIT(6),
> -			},
> -			.irq1_func = {
> -				.addr = 0x5e,
> -				.mask = BIT(5),
> -			},
> -			.irq2_func = {
> -				.addr = 0x5f,
> -				.mask = BIT(5),
> -			},
> -			.hla = {
> -				.addr = 0x12,
> -				.mask = BIT(5),
> -			},
> -			.od = {
> -				.addr = 0x12,
> -				.mask = BIT(4),
> -			},
> -		},
> -		.batch = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.addr = 0x09,
> -				.mask = GENMASK(3, 0),
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.addr = 0x09,
> -				.mask = GENMASK(7, 4),
> -			},
> -		},
> -		.fifo_ops = {
> -			.update_fifo = st_lsm6dsx_update_fifo,
> -			.read_fifo = st_lsm6dsx_read_tagged_fifo,
> -			.fifo_th = {
> -				.addr = 0x07,
> -				.mask = GENMASK(8, 0),
> -			},
> -			.fifo_diff = {
> -				.addr = 0x3a,
> -				.mask = GENMASK(9, 0),
> -			},
> -			.th_wl = 1,
> -		},
> -		.ts_settings = {
> -			.timer_en = {
> -				.addr = 0x19,
> -				.mask = BIT(5),
> -			},
> -			.decimator = {
> -				.addr = 0x0a,
> -				.mask = GENMASK(7, 6),
> -			},
> -			.freq_fine = 0x63,
> -		},
> -		.shub_settings = {
> -			.page_mux = {
> -				.addr = 0x01,
> -				.mask = BIT(6),
> -			},
> -			.master_en = {
> -				.sec_page = true,
> -				.addr = 0x14,
> -				.mask = BIT(2),
> -			},
> -			.pullup_en = {
> -				.sec_page = true,
> -				.addr = 0x14,
> -				.mask = BIT(3),
> -			},
> -			.aux_sens = {
> -				.addr = 0x14,
> -				.mask = GENMASK(1, 0),
> -			},
> -			.wr_once = {
> -				.addr = 0x14,
> -				.mask = BIT(6),
> -			},
> -			.num_ext_dev = 3,
> -			.shub_out = {
> -				.sec_page = true,
> -				.addr = 0x02,
> -			},
> -			.slv0_addr = 0x15,
> -			.dw_slv0_addr = 0x21,
> -			.batch_en = BIT(3),
> -		},
> -		.event_settings = {
> -			.enable_reg = {
> -				.addr = 0x58,
> -				.mask = BIT(7),
> -			},
> -			.wakeup_reg = {
> -				.addr = 0x5B,
> -				.mask = GENMASK(5, 0),
> -			},
> -			.wakeup_src_reg = 0x1b,
> -			.wakeup_src_status_mask = BIT(3),
> -			.wakeup_src_z_mask = BIT(0),
> -			.wakeup_src_y_mask = BIT(1),
> -			.wakeup_src_x_mask = BIT(2),
> -		}
> -	},
> -	{
> -		.wai = 0x6d,
> -		.reset = {
> -			.addr = 0x12,
> -			.mask = BIT(0),
> -		},
> -		.boot = {
> -			.addr = 0x12,
> -			.mask = BIT(7),
> -		},
> -		.bdu = {
> -			.addr = 0x12,
> -			.mask = BIT(6),
> -		},
> -		.max_fifo_size = 512,
> -		.id = {
> -			{
> -				.hw_id = ST_LSM6DST_ID,
> -				.name = ST_LSM6DST_DEV_NAME,
> -			},
> -		},
> -		.channels = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.chan = st_lsm6dsx_acc_channels,
> -				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.chan = st_lsm6dsx_gyro_channels,
> -				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
> -			},
> -		},
> -		.drdy_mask = {
> -			.addr = 0x13,
> -			.mask = BIT(3),
> -		},
> -		.odr_table = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.reg = {
> -					.addr = 0x10,
> -					.mask = GENMASK(7, 4),
> -				},
> -				.odr_avl[0] = {  12500, 0x01 },
> -				.odr_avl[1] = {  26000, 0x02 },
> -				.odr_avl[2] = {  52000, 0x03 },
> -				.odr_avl[3] = { 104000, 0x04 },
> -				.odr_avl[4] = { 208000, 0x05 },
> -				.odr_avl[5] = { 416000, 0x06 },
> -				.odr_avl[6] = { 833000, 0x07 },
> -				.odr_len = 7,
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.reg = {
> -					.addr = 0x11,
> -					.mask = GENMASK(7, 4),
> -				},
> -				.odr_avl[0] = {  12500, 0x01 },
> -				.odr_avl[1] = {  26000, 0x02 },
> -				.odr_avl[2] = {  52000, 0x03 },
> -				.odr_avl[3] = { 104000, 0x04 },
> -				.odr_avl[4] = { 208000, 0x05 },
> -				.odr_avl[5] = { 416000, 0x06 },
> -				.odr_avl[6] = { 833000, 0x07 },
> -				.odr_len = 7,
> -			},
> -		},
> -		.fs_table = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.reg = {
> -					.addr = 0x10,
> -					.mask = GENMASK(3, 2),
> -				},
> -				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
> -				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
> -				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
> -				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
> -				.fs_len = 4,
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.reg = {
> -					.addr = 0x11,
> -					.mask = GENMASK(3, 2),
> -				},
> -				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
> -				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
> -				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
> -				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
> -				.fs_len = 4,
> -			},
> -		},
> -		.irq_config = {
> -			.irq1 = {
> -				.addr = 0x0d,
> -				.mask = BIT(3),
> -			},
> -			.irq2 = {
> -				.addr = 0x0e,
> -				.mask = BIT(3),
> -			},
> -			.lir = {
> -				.addr = 0x56,
> -				.mask = BIT(0),
> -			},
> -			.clear_on_read = {
> -				.addr = 0x56,
> -				.mask = BIT(6),
> -			},
> -			.irq1_func = {
> -				.addr = 0x5e,
> -				.mask = BIT(5),
> -			},
> -			.irq2_func = {
> -				.addr = 0x5f,
> -				.mask = BIT(5),
> -			},
> -			.hla = {
> -				.addr = 0x12,
> -				.mask = BIT(5),
> -			},
> -			.od = {
> -				.addr = 0x12,
> -				.mask = BIT(4),
> -			},
> -		},
> -		.batch = {
> -			[ST_LSM6DSX_ID_ACC] = {
> -				.addr = 0x09,
> -				.mask = GENMASK(3, 0),
> -			},
> -			[ST_LSM6DSX_ID_GYRO] = {
> -				.addr = 0x09,
> -				.mask = GENMASK(7, 4),
> -			},
> -		},
> -		.fifo_ops = {
> -			.update_fifo = st_lsm6dsx_update_fifo,
> -			.read_fifo = st_lsm6dsx_read_tagged_fifo,
> -			.fifo_th = {
> -				.addr = 0x07,
> -				.mask = GENMASK(8, 0),
> -			},
> -			.fifo_diff = {
> -				.addr = 0x3a,
> -				.mask = GENMASK(9, 0),
> -			},
> -			.th_wl = 1,
> -		},
> -		.ts_settings = {
> -			.timer_en = {
> -				.addr = 0x19,
> -				.mask = BIT(5),
> -			},
> -			.decimator = {
> -				.addr = 0x0a,
> -				.mask = GENMASK(7, 6),
> -			},
> -			.freq_fine = 0x63,
> -		},
> -		.shub_settings = {
> -			.page_mux = {
> -				.addr = 0x01,
> -				.mask = BIT(6),
> -			},
> -			.master_en = {
> -				.sec_page = true,
> -				.addr = 0x14,
> -				.mask = BIT(2),
> -			},
> -			.pullup_en = {
> -				.sec_page = true,
> -				.addr = 0x14,
> -				.mask = BIT(3),
> -			},
> -			.aux_sens = {
> -				.addr = 0x14,
> -				.mask = GENMASK(1, 0),
> -			},
> -			.wr_once = {
> -				.addr = 0x14,
> -				.mask = BIT(6),
> -			},
> -			.num_ext_dev = 3,
> -			.shub_out = {
> -				.sec_page = true,
> -				.addr = 0x02,
> -			},
> -			.slv0_addr = 0x15,
> -			.dw_slv0_addr = 0x21,
> -			.batch_en = BIT(3),
> -		},
> -		.event_settings = {
> -			.enable_reg = {
> -				.addr = 0x58,
> -				.mask = BIT(7),
> -			},
> -			.wakeup_reg = {
> -				.addr = 0x5b,
> -				.mask = GENMASK(5, 0),
> -			},
> -			.wakeup_src_reg = 0x1b,
> -			.wakeup_src_status_mask = BIT(3),
> -			.wakeup_src_z_mask = BIT(0),
> -			.wakeup_src_y_mask = BIT(1),
> -			.wakeup_src_x_mask = BIT(2),
> -		},
> -	},
>  };
>  
>  int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
> @@ -1582,7 +1187,7 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
>  		return err;
>  	}
>  
> -	if (data != st_lsm6dsx_sensor_settings[i].wai) {
> +	if (data != st_lsm6dsx_sensor_settings[i].id[j].wai) {
>  		dev_err(hw->dev, "unsupported whoami [%02x]\n", data);
>  		return -ENODEV;
>  	}


      reply	other threads:[~2020-11-29 13:03 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-28 10:08 [PATCH] iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table Lorenzo Bianconi
2020-11-29 13:03 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201129130302.62f4f38f@archlinux \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=lorenzo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.