All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel@lists.freedesktop.org, Sekhar Nori <nsekhar@ti.com>,
	Jyri Sarha <jsarha@ti.com>, Nikhil Devshatwar <nikhil.nd@ti.com>
Subject: Re: [PATCH v2 2/5] drm/omap: use degamma property for gamma table
Date: Mon, 30 Nov 2020 12:39:03 +0200	[thread overview]
Message-ID: <20201130103903.GA7220@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20201103080310.164453-3-tomi.valkeinen@ti.com>

Hi Tomi,

Thank you for the patch.

On Tue, Nov 03, 2020 at 10:03:07AM +0200, Tomi Valkeinen wrote:
> omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
> is:
> 
> gamma -> ctm -> out
> 
> instead of what the model DRM framework uses:
> 
> ctm -> gamma -> out
> 
> As the following patches add CTM support for omapdrm, lets first fix the
> gamma.
> 
> This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and uses
> drm_atomic_helper_legacy_degamma_set for gamma_set helper. Thus we will
> have:
> 
> degamma -> ctm -> out
> 
> and the legacy ioctl will continue working as before.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/omap_crtc.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
> index d7442aa55f89..d40220b2f312 100644
> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> @@ -575,8 +575,8 @@ static int omap_crtc_atomic_check(struct drm_crtc *crtc,
>  									  crtc);
>  	struct drm_plane_state *pri_state;
>  
> -	if (crtc_state->color_mgmt_changed && crtc_state->gamma_lut) {
> -		unsigned int length = crtc_state->gamma_lut->length /
> +	if (crtc_state->color_mgmt_changed && crtc_state->degamma_lut) {
> +		unsigned int length = crtc_state->degamma_lut->length /
>  			sizeof(struct drm_color_lut);
>  
>  		if (length < 2)
> @@ -617,10 +617,10 @@ static void omap_crtc_atomic_flush(struct drm_crtc *crtc,
>  		struct drm_color_lut *lut = NULL;
>  		unsigned int length = 0;
>  
> -		if (crtc->state->gamma_lut) {
> +		if (crtc->state->degamma_lut) {
>  			lut = (struct drm_color_lut *)
> -				crtc->state->gamma_lut->data;
> -			length = crtc->state->gamma_lut->length /
> +				crtc->state->degamma_lut->data;
> +			length = crtc->state->degamma_lut->length /
>  				sizeof(*lut);
>  		}
>  		priv->dispc_ops->mgr_set_gamma(priv->dispc, omap_crtc->channel,
> @@ -741,7 +741,7 @@ static const struct drm_crtc_funcs omap_crtc_funcs = {
>  	.set_config = drm_atomic_helper_set_config,
>  	.destroy = omap_crtc_destroy,
>  	.page_flip = drm_atomic_helper_page_flip,
> -	.gamma_set = drm_atomic_helper_legacy_gamma_set,
> +	.gamma_set = drm_atomic_helper_legacy_degamma_set,
>  	.atomic_duplicate_state = omap_crtc_duplicate_state,
>  	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>  	.atomic_set_property = omap_crtc_atomic_set_property,
> @@ -842,7 +842,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
>  	if (priv->dispc_ops->mgr_gamma_size(priv->dispc, channel)) {
>  		unsigned int gamma_lut_size = 256;
>  
> -		drm_crtc_enable_color_mgmt(crtc, 0, false, gamma_lut_size);
> +		drm_crtc_enable_color_mgmt(crtc, gamma_lut_size, false, 0);
>  		drm_mode_crtc_set_gamma_size(crtc, gamma_lut_size);
>  	}
>  
> 

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-11-30 10:39 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-03  8:03 [PATCH v2 0/5] drm/omap: add color mgmt support Tomi Valkeinen
2020-11-03  8:03 ` [PATCH v2 1/5] drm: add legacy support for using degamma for gamma Tomi Valkeinen
2020-11-30 10:38   ` Laurent Pinchart
2020-11-30 12:12     ` Tomi Valkeinen
2020-11-30 14:10       ` Daniel Vetter
2020-12-02 11:52         ` Tomi Valkeinen
2020-12-02 12:38           ` Daniel Vetter
2020-12-03 12:31             ` Ville Syrjälä
2020-12-03 12:35               ` Tomi Valkeinen
2020-11-03  8:03 ` [PATCH v2 2/5] drm/omap: use degamma property for gamma table Tomi Valkeinen
2020-11-30 10:39   ` Laurent Pinchart [this message]
2020-11-03  8:03 ` [PATCH v2 3/5] drm/omap: Implement CTM property for CRTC using OVL managers CPR matrix Tomi Valkeinen
2020-11-30 10:41   ` Laurent Pinchart
2020-11-30 11:39     ` Tomi Valkeinen
2020-11-03  8:03 ` [PATCH v2 4/5] drm/omap: rearrange includes in omapdss.h Tomi Valkeinen
2020-11-30 10:42   ` Laurent Pinchart
2020-11-03  8:03 ` [PATCH v2 5/5] drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes Tomi Valkeinen
2020-11-30 10:50   ` Laurent Pinchart
2020-11-30 11:53     ` Tomi Valkeinen
2020-11-30 14:19       ` Laurent Pinchart
2020-11-30 14:36         ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201130103903.GA7220@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=nikhil.nd@ti.com \
    --cc=nsekhar@ti.com \
    --cc=pekka.paalanen@collabora.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.