All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrien Grassein <adrien.grassein@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	troy.kisky@boundarydevices.com, gary.bisson@boundarydevices.com,
	Adrien Grassein <adrien.grassein@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: regulator: add pf8x00 PMIC
Date: Thu, 10 Dec 2020 23:16:28 +0100	[thread overview]
Message-ID: <20201210221629.17312-1-adrien.grassein@gmail.com> (raw)
In-Reply-To: <20201206002629.12872-1-adrien.grassein@gmail.com>

Add a devicetree binding documentation for the pf8x00 regulator driver.

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
---
 .../regulator/nxp,pf8x00-regulator.yaml       | 232 ++++++++++++++++++
 MAINTAINERS                                   |   6 +
 2 files changed, 238 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
new file mode 100644
index 000000000000..98cb0d281bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF8x00 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Adrien Grassein <adrien.grassein@gmail.com>
+
+description:
+  pf8x00 are a 12-chanel regulator PMIC family. Regulators nodes should
+  be named to ldo<>, sw<> and vnss. The definition for each of these nodes
+  is defined using the standard binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at https://www.nxp.com/docs/en/data-sheet/PF8100_PF8200.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pf8100
+      - nxp,pf8121a
+      - nxp,pf8200
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^ldo[1-4]$"
+            description:
+              should be ldo1", ..., "ldo4"
+
+          nxp,hw-en:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Only available for ldo2. If present, use LDO2EN input pin
+              to enable or disable ldo2. (LDO2EN should be in HIGH state
+              to enable LDO2 if nxp,hw-en is specified).
+
+          nxp,vselect-en:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Only available for ldo2. When specified, use the VSELECT
+              input pin of the chip to control the output voltage of the
+              ldo02 regulator. (3.3V if VSELECT is LOW, 1.8V if HIGH).
+
+        unevaluatedProperties: false
+
+      "^sw[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single SW regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^sw[1-7]$"
+            description:
+              should be sw1", ..., "sw7"
+
+          nxp,ilim-microamp:
+            $ref: /schemas/types.yaml#definitions/uint32
+            minimum: 2100
+            maximum: 4500
+            default: 2100
+            enum: [ 2100, 2600, 3000, 4500 ]
+            description:
+              Defines the maximum current delivered by the regulator in microamp.
+
+          nxp,phase:
+            $ref: /schemas/types.yaml#definitions/uint32
+            minimum: 0
+            maximum: 315
+            default: 0
+            enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
+            description:
+               This controls the phase shift of the switching frequency.
+
+          nxp,fast-slew:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Enables the fast DVS ramp of the regulator.
+              Default is slow DVS ramp.
+
+          nxp,dual-phase:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              This allow regulators  sw1 and sw2, to work together to
+              deliver a maximum 5A current. Should be only specified
+              for sw1. If set, sw2 configuration will be totally ignored.
+
+          nxp,quad-phase:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              This allow regulators  sw1, sw2, sw3 and sw4 to work together
+              to deliver a maximum 10A current. Should be only specified for
+              sw1. If set, sw2, sw3 and sw4 configuration will be totally ignored.
+
+        unevaluatedProperties: false
+
+    properties:
+      vsnvs:
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for vsnvs regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@8 {
+        compatible = "nxp,pf8100";
+        reg = <0x08>;
+
+        regulators {
+            reg_ldo1: ldo1 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo2: ldo2 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo3: ldo3 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo4: ldo4 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_sw1: sw1 {
+              nxp,phase = <0>;
+              nxp,ilim-microamp = <4500>;
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+            reg_sw2: sw2 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+            reg_sw3: sw3 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+              nxp,fast-slew;
+            };
+
+            reg_sw4: sw4 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+              nxp,fast-slew;
+            };
+
+            reg_sw5: sw5 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+           reg_sw6: sw6 {
+             regulator-always-on;
+             regulator-boot-on;
+             regulator-max-microvolt = <1800000>;
+             regulator-min-microvolt =  <400000>;
+           };
+
+           reg_sw7: sw7 {
+             regulator-always-on;
+             regulator-boot-on;
+             regulator-max-microvolt = <4100000>;
+             regulator-min-microvolt = <1000000>;
+           };
+
+          reg_vsnvs: vsnvs {
+            regulator-always-on;
+            regulator-boot-on;
+            regulator-max-microvolt = <3300000>;
+            regulator-min-microvolt = <1800000>;
+          };
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 52086876ce40..71b4476a7619 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13737,6 +13737,12 @@ S:	Maintained
 F:	include/linux/personality.h
 F:	include/uapi/linux/personality.h
 
+PF8x00 PMIC REGULATORS DRIVERS
+M:	Adrien Grassein <adrien.grassein@gmail.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+
 PHOENIX RC FLIGHT CONTROLLER ADAPTER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
 L:	linux-input@vger.kernel.org
-- 
2.20.1


  parent reply	other threads:[~2020-12-10 23:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-06  0:26 [PATCH 1/2] dt-bindings: regulator: Add pf8x00 regulator Adrien Grassein
2020-12-06  0:26 ` [PATCH 2/2] regulator: pf8x00: add support of nxp " Adrien Grassein
2020-12-07 14:08   ` Mark Brown
2020-12-07 20:36   ` kernel test robot
2020-12-07 20:36     ` kernel test robot
2020-12-07 13:55 ` [PATCH 1/2] dt-bindings: regulator: Add " Mark Brown
2020-12-10 22:24   ` Adrien Grassein
2020-12-11 13:25     ` Mark Brown
2020-12-10  3:35 ` Rob Herring
2020-12-10 22:16 ` Adrien Grassein [this message]
2020-12-10 22:16   ` [PATCH v2 2/2] regulator: pf8x00: add support of nxp " Adrien Grassein
2020-12-11 15:28     ` Mark Brown
2020-12-11 14:04   ` [PATCH v2 1/2] dt-bindings: regulator: add pf8x00 PMIC Mark Brown
2020-12-12 22:43     ` Adrien Grassein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210221629.17312-1-adrien.grassein@gmail.com \
    --to=adrien.grassein@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gary.bisson@boundarydevices.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=troy.kisky@boundarydevices.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.