From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Eddie James <eajames@linux.ibm.com>
Subject: [PATCH linux dev-5.8] ARM: dts: Aspeed: Add Everest BMC machine
Date: Fri, 11 Dec 2020 11:07:04 -0600 [thread overview]
Message-ID: <20201211170704.27640-1-eajames@linux.ibm.com> (raw)
Add the Everest machine powered by an AST2600 chip. Copy the basic
configuration from Rainier.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 775 +++++++++++++++++++
2 files changed, 776 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5fd12e8909d3..c13ac1bf7216 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1360,6 +1360,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-wedge100.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
+ aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..6bd876657bb8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,775 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Everest";
+ compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
+ serial4 = &uart5;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ spi30 = &cfam2_spi0;
+ spi31 = &cfam2_spi1;
+ spi32 = &cfam2_spi2;
+ spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b8000000 {
+ no-map;
+ reg = <0xb8000000 0x04000000>; /* 64M */
+ };
+
+ /* 48MB region from the end of flash to start of vga memory */
+ ramoops@bc000000 {
+ compatible = "ramoops";
+ reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+};
+
+&fsim0 {
+ status = "okay";
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /*
+ * CFAM Reset is supposed to be active low but pass1 hardware is wired
+ * active high.
+ */
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ0: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub0: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ1: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub1: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+
+ cfam@2,0 {
+ reg = <2 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <2>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ };
+
+ cfam2_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ };
+
+ cfam2_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam2_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam2_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam2_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam2_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam2_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ2: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub2: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+
+ cfam@3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ };
+
+ cfam3_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ };
+
+ cfam3_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam3_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam3_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam3_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam3_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam3_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi1: spi@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi2: spi@40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi3: spi@60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ3: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub3: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+ reg = <1>;
+};
+
+&fsi_occ1 {
+ reg = <2>;
+};
+
+&fsi_occ2 {
+ reg = <3>;
+};
+
+&fsi_occ3 {
+ reg = <4>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&kcs4 {
+ compatible = "openbmc,mctp-lpc";
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
--
2.18.4
next reply other threads:[~2020-12-11 17:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 17:07 Eddie James [this message]
2021-01-21 16:14 ` [PATCH linux dev-5.8] ARM: dts: Aspeed: Add Everest BMC machine Andrew Geissler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211170704.27640-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.